Abstract
Resistance spot welding is an important and widely used method for joining metal objects. In this paper, various classification methods for identifying welding processes are evaluated. Using process identification, a similar process for a new welding experiment can be found among the previously run processes, and the process parameters leading to high-quality welding joints can be applied. With this approach, good welding results can be obtained right from the beginning, and the time needed for the set-up of a new process can be substantially reduced. In addition, previous quality control methods can also be used for the new process. Different classifiers are tested with several data sets consisting of statistical and geometrical features extracted from current and voltage signals recorded during welding. The best feature set - classifier combination for the data used in this study is selected. Finally, it is concluded that welding processes can be identified almost perfectly by certain features.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Aravinthan, A., Sivayoganathan, K., Al-Dabass, D., Balendran, V.: A Neural Network System for Spot Weld Strength Prediction. In: UKSIM 2001, Conference Proceedings of the UK Simulation Society, pp. 156–160 (2001)
Cho, Y., Rhee, S.: Primary Circuit Dynamic Resistance Monitoring and Its Application on Quality Estimation During Resistance Spot Welding. Welding Researcher, 104–111 (2002)
Devijver, P.A., Kittler, J.: Pattern Recognition - A Statistical approach. Prentice Hall, London (1982)
Duda, R.O., Hart, P.E., Stork, D.G.: Pattern Classification. John Wiley & Sons, Inc., New York (2001)
Karlsruhe, F.: Homepage of the University (2004), http://www.fh-karlsruhe.de/ (referenced 3.11.2004)
Haesloop, D., Holt, B.R.: Neural Networks for Process Identification. In: IJCNN, International Joint Conference on Neural Networks, vol. 3, pp. 429–434 (1990)
Harms+Wende GmbH & Co.KG, (2004), http://www.harms-wende.de
Holmström, L., Koistinen, P., Laaksonen, J., Oja, E.: Neural and Statistical Classifiers – Taxonomy and Two Case Studies. IEEE Transactions on Neural Networks 8(1), 5–17 (1997)
Junno, H., Laurinen, P., Tuovinen, L., Röning, J.: Studying the Quality of Resistance Spot Welding Joints Using Self-Organising Maps. In: Proceedings of the Fourth International ICSC Symposium on Engineering of Intelligent Systems (2004)
Junno, H., Laurinen, P., Haapalainen, E., Tuovinen, L., Röning, J., Zettel, D., Sampaio, D., Link, N., Peschl, M.: Resistance Spot Welding Process Identification and Initialization Based on Self-Organising Maps. In: Proceedings of the 1st International Conference on Informatics in Control, Automation and Robotics, vol. 1, pp. 296–299 (2004)
Kohonen, T.: Self-Organizing Maps, 2nd edn. Springer, Heidelberg (1997)
Kulessky, R., Nudelman, G., Zimin, M.: Digital Electropneumatic Control System of Power Boiler Processes. Process Identification and Motion Optimization. In: Nineteenth Convention of Electrical and Electronics Engineers in Israel, pp. 507–510 (1996)
Laurinen, P., Junno, H., Tuovinen, L., Röning, J.: Studying the Quality of Resistance Spot Welding Joints Using Bayesian Networks. In: Proceedings of Artificial Intelligence and Applications, pp. 705–711 (2004)
McLachlan, G.J.: Discriminant Analysis and Statistical Pattern Recognition. John Wiley & Sons, Inc., New York (1992)
Mintz, D., Wen, J.T.: Process Monitoring and Control for Robotic Resistive Welding. In: Proceedings of the 4th IEEE Conference on Control Applications, September 28-29, 1995, pp. 1126–1127 (1995)
Reinsch, C.H.: Smoothing by Spline Functions. Numerische Matematik 10, 177–183 (1967)
Reinsch, C.H.: Smoothing by Spline Functions, II. Numerische Matematik 16, 451–454 (1971)
Stanzbiegetechnik, Web site of SBT (2004), http://www.stanzbiegetechnik.at (referenced 18.2.2004)
TWI World Centre for Materials Joining Technology: Resistance Spot Welding (Knowledge Summary), www document, http://www.twi.co.uk/j32k/protected/band_3/kssaw001.html (referenced 3.11.2004)
Zettel, D., Sampaio, D., Link, N., Braun, A., Peschl, M., Junno, H.: A Self Organising Map (SOM) Sensor for the Detection, Visualisation and Analysis of Process Drifts. In: Poster Proceedings of the 27th Annual German Conference on Artificial Intelligence, pp. 175–188 (2004)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Haapalainen, E., Laurinen, P., Junno, H., Tuovinen, L., Röning, J. (2005). Methods for Classifying Spot Welding Processes: A Comparative Study of Performance. In: Ali, M., Esposito, F. (eds) Innovations in Applied Artificial Intelligence. IEA/AIE 2005. Lecture Notes in Computer Science(), vol 3533. Springer, Berlin, Heidelberg. https://doi.org/10.1007/11504894_58
Download citation
DOI: https://doi.org/10.1007/11504894_58
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-26551-1
Online ISBN: 978-3-540-31893-4
eBook Packages: Computer ScienceComputer Science (R0)