Abstract
In this paper we describe a procedure for generating building models from large scale vector maps and laser altimeter data. First the vector map is analyzed to group the outlines of buildings and to obtain a hierarchical description of buildings or building complexes. The base area is used to mask the elevation data of single buildings and to derive a coarse 3D-description by prismatic models. Afterwards, details of the roof are analyzed. Based on the histogram of heights, flat roofs and sloped roofs are discriminated. For reconstructing flat roofs with superstructures, peaks are searched in the histogram and used to segment the height data. Compact segments are examined for a regular shape and approximated by additional prismatic objects. For reconstructing sloped roofs, the gradient field of the elevation data is calculated and a histogram of orientations is determined. Major orientations in the histogram are detected and used to segment the elevation image. For each segment containing homogeneous orientations and slopes, a spatial plane is fitted and a 3D-contour is constructed. In order to obtain a polygonal description, adjacent planes are intersected and common vertices are calculated.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Adrian G, Fiedler F (1991) Simulation of unstationary wind and temperature fields over complex terrain and comparison with observations. Beitr. Phys. Atmosph., 64, 27–48
Besl PJ (1988) Surfaces in range image understanding. New York: Springer
Danahy J (1997) A set of visualization data needs in urban environmental planning & design for photogrammetric data. In: Gruen et al. (eds) Automatic extraction of man-made objects from aerial and space images (II), 357–366, Basel: Birkhäuser
Gruber M, Kofler M, Leberl F (1997) Managing large 3D urban database contents supporting phototexture and levels of detail. In: Gruen et al. (eds) Automatic extraction of man-made objects from aerial and space images (II), 377–386, Basel: Birkhäuser
Gruen A (1998) TOBAGO-a semi-automated approach for the generation of 3-D building models. ISPRS Journal of photogrammetry & remote sensing, 53(2): 108–118
Guelch E (1997) Application of semi-automatic building acquisition. In: Gruen A et al. (eds.) Automatic extraction of man-made objects from aerial and space images (II), 129–138, Basel: Birkhäuser
Haala N, Brenner C (1997) Interpretation of urban surface models using 2D building information. In: Gruen A et al. (eds.) Automatic extraction of man-made objects from aerial and space images (II), 213–222, Basel: Birkhäuser
Hug C, Wehr A (1997) Detecting and identifying topographic objects in laser altimeter data. ISPRS, International archives of photogrammetry and remote sensing, Vol. 32, Part 3-4W2, 19–268.
Huising EJ, Gomes Pereira LM (1998) Errors and accuracy estimates of laser data acquired by various laser scanning systems for topographic applications. ISPRS Journal of photogrammetry and remote sensing, 53:245–261
Hoover A, Jean-Baptiste, Jiang X, Flynn PJ, Bunke H, Goldof DB, Bowyer K, Eggert DW, Fitzgibbon A, Fisher RB (1996) An experimental comparison of range image segmentation algorithms. IEEE T-PAMI, 16(7):673–689
Kakumoto S, Hatayama M, Kameda H, Taniguchi T (1997) Development of disaster management spatial information system. Proc. GIS’97 Conf., 595–598
Kürner T, Cichon DJ, Wiesbeck W (1993) Concepts and results for 3D digital terrain-based wave propagation models: An overview. IEEE Journal on selected areas in communications, 11: 1002–1012
Lemmens MJPM, Deijkers H, Looman PAM (1997) Building detection by fusing airborne laser-altimeter DEMs and 2D digital maps. ISPRS, International archives of photogrammetry and remote sensing, Vol. 32, Part 3-4W2, 42–49
Lohr U (1998) Laser scan DEM for various applications. In: Fritsch D, Englich M, Sester M (eds) GIS-Between Visions and Applications. ISPRS, International archives of photogrammetry and remote sensing, Vol. 32, Part 4, 353–356
Stilla U (1995) Map-aided structural analysis of aerial images. ISPRS Journal of Photogrammetry and Remote Sensing, 50(4): 3–10
Stilla U, Michaelsen E, Lütjen K (1996) Automatic extraction of buildings from aerial images. In: Leberl F, Kalliany R, Gruber M (eds) Mapping buildings, roads and other manmade structures from images, IAPR-TC7. Wien: Oldenburg, 229–244
Stilla U, Michaelsen E (1997) Semantic modeling of man-made objects by production nets. In: Gruen A, Baltsavias EP, Henricsson O (eds) Automatic extraction of man-made objects from aerial and space images (II). Basel: Birkhäuser, 43–52
Stilla U, Michaelsen E, Jurkiewicz K (1998) Structural analysis of right-angled building contours. ISPRS, International archives of photogrammetry and remote sensing, Vol. 32, Part 3/1, 379–386
Shibasaki R (1998) Proceedings of UM3’98, International Workshop on Urban Multi-Media/3D Mapping., University of Tokyo, Institute of Industrial Science.
Weidner U, Förstner W (1995) Towards automatic building extraction from high-resolution digital elevation models. ISPRS Journal of photogrammetry and remote sensing, 50(4): 38–49
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Stilla, U., Jurkiewicz, K. (1999). Reconstruction of Building Models from Maps and Laser Altimeter Data. In: Agouris, P., Stefanidis, A. (eds) Integrated Spatial Databases. ISD 1999. Lecture Notes in Computer Science, vol 1737. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-46621-5_3
Download citation
DOI: https://doi.org/10.1007/3-540-46621-5_3
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-66931-9
Online ISBN: 978-3-540-46621-5
eBook Packages: Springer Book Archive