Abstract
This chapter reflects on the finalized EU-funded project PeTEX-platform for e-Learning and Telemetric Experimentation aimed at designing and prototyping a CSCL platform-system for developing, implementing, and delivering educational and training programs in the field of manufacturing engineering. The main challenge for the PeTEX project team was to transform actual laboratory test beds, domain specific content and social interaction modes into a web-mediated socio-technical system in order to bring together learning and workplace as CSCL@Work. The designed learning system is based on Moodle and includes distributed tele-operated experimentation facilities, educational content and socio-technical affordances to provide the basis for an international large-scale online learning community. For this purpose the project team developed and established new collaborative learning approaches for students and professionals within the ICT-based system. This chapter gives an overview on the fundamental theoretical principles as well as important steps and results of the participatory design approach applied during the project’s lifetime. It concludes with a set of new tasks and challenges to be considered in future systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Auer, M. E., Dobrovska, D., & Edwards, A. (2011). New pedagogic challenges in engineering education and the answer of IGIP. In Proceedings of 41st ASEE/IEEE Frontiers in Education Conference; October 12–15, 2011. Rapid City, SD, USA.
Auer, M. E., & Gravier, C. (2009). The many facets of remote laboratories in online engineering education. IEEE Transactions on Learning Technologies, 2(4), 260–262.
Auer, M. E., & Pester, A. (2009). Online engineering as a new challenge in higher education: University & Industry—Knowledge transfer and innovation. Athens, NY: WSEAS Press.
Bloom, B. S., & Krathwohl, D. R. (1956). Taxonomy of educational objectives: The classification of educational goals, by a Committee of College and University Examiners. Handbook I: Cognitive domain. Green, NY: Longmans.
Breuer, A. C. (2009). Das Portfolio im Unterricht—Theorie und Praxis im Spiegel des Konstruktivismus. Münster: Waxman Verlag GmbH.
Bryman, A. (2008). Social research methods (3rd ed.). New York: Oxford University Press.
Campbell, M. E. (1998). Oh, now I get it!. Journal of Engineering Education (JEE), 88(4), 381–383.
Chatti, S., Hermes, M., Tekkaya, A. E., & Kleiner, M. (2010). The new TSS bending process: 3D bending of profiles with arbitrary cross-sections. CIRP Annals - Manufacturing Technology, 59(1), 315–318.
Collins, A., & Halverson, R. (2009). Rethinking education in the age of technology: The digital revolution and schooling in America. New York: Teachers College Press.
Commission Staff Working Document, The use of ICT to support innovation and lifelong learning for all—A report on progress. Brussels, 09/10/2008, SEC (2008) 2629 final. Retrieved August 18, 2011, from http://ec.europa.eu/education/lifelong-learning-programme/doc/sec2629.pdf
Duffy, T. M., & Cunningham, D. J. (1996). Constructivism: Implications for the design and delivery of instruction. In D. H. Jonassen (Ed.), Handbook of research for educational communications and technology (p. 177). New York: Simon & Schuster Macmillan.
Ellström, P.-E. (2005). Arbetsplatslärandets janusansikte. Pedagogisk Forskning I Sverige, 10(3–4), 182–194.
Feisel, L. D., & Rosa, A. J. (2005). The role of the laboratory in undergraduate engineering education. Journal of Engineering Education, 94(1), 121–130.
Goggings S. P. & Jahnke, I. (2013). CSCL@Work: Making Learning Visible in Unexpected Online Places Across Established Boundaries (see chapter 01 in this book).
Gomes, L., & Bogosyan, S. (2009). Current trends in remote laboratories. IEEE Transactions on Industrial Electronics, 56(12), 4744–4756.
Healey, M. (2005). Linking research and teaching. Exploring disciplinary spaces and the role of inquiry-based learning. In R. Barnett (Ed.), Reshaping the University (pp. 67–78). McGraw-Hill/Open University Press: Maidenhead.
Herrmann, T. (2003). Learning and teaching in socio-technical environments. Proceedings of the IFIP TC3/WG3.1&3.2 Open Conference on Informatics and the Digital Society: Social, Ethical and Cognitive Issues on Informatics and ICT (pp. 59–71).
Herrmann, T. (2006). SeeMe in a Nutshell. Retrieved March 8, 2008, from http://www.imtm-iaw.rub.de/imperia/md/content/seeme/seeme_in_a_nutshell.pdf
Herrmann, T., Hoffmann, M., Kunau, G., & Loser, K. U. (2004). A modeling method for the development of groupware applications as socio-technical systems. Behaviour & Information Technology, 23(2), 119–135.
Jahnke, I., Terkowsky, C., Pleul né Burkhardt, C., Dirksen, U., Heiner, M., Wildt, J., et al. (2009). Experimentierendes Lernen entwerfen—eLearning mit Design-based Research. In N. Apostolopoulos, H. Hoffmann, V. Mansmann, & A. Schwill (Eds.), E-Learning. Lernen im digitalen Zeitalter (pp. 279–290). Münster: Waxmann.
Jahnke, I., Terkowsky, C., Pleul, C., & Tekkaya, A. E. (2010). Online learning with remote-configured experiments. In M. Kerres, N. Ojstersek, U. Schroeder., & U. Hoppe (Eds.), Interaktive Kulturen, DeLFI 2010: Universitaet Duisburg-Essen. Proceedings of 8. Tagung der Fachgruppe E-Learning der Gesellschaft für Informatik e.V (pp. 265–277).
Jenkins, A., Breen, R., & Lindsay, R. (2007). Reshaping teaching in higher education. Linking teaching with research. New York: Routledge.
Jungmann, T. (2011). Forschendes Lernen im Logistikstudium. Systematische Entwicklung, Implementierung und empirische Evaluation eines hochschuldidaktischen Modells am Beispiel des Projektmanagements. Dissertation, TU Dortmund University.
Kensing, F., & Blomberg, J. (1998). Participatory design: Issues and concerns. Computer Supported Cooperative Work, 7, 167–185.
Lave, J., & Wenger, E. (1998). Situated learning: Legitimate peripheral participation. New York: Cambridge University.
May, D., Terkowsky, C., Haertel, T., & Pleul, C. (2012). Using E-Portfolios to support experiential learning and open the use of tele-operated laboratories for mobile devices. In M. E. Auer & J. García Zubía (Eds.), REV2012—Remote Engineering & Virtual Instrumentation, Bilbao, Spain, Conference Proceedings (pp. 172–180). Vienna: IAOE.
Pleul, C., Terkowsky, C., Jahnke, I., Dirksen, U., Heiner, M., Wildt, J., et al. (2009). Experimental e-learning—Insights from the European project PeTEX. In Book of Abstracts: ONLINE EDUCA BERLIN 2009—15th International Conference on Technology Supported Learning and Training (pp. 47–50). Berlin: ICWE GmbH.
Pleul, C., Terkowsky, C., Jahnke, I., & Tekkaya, A. E. (2011a). Tele-operated laboratory experiments in engineering education–the uniaxial tensile test for material characterization in forming technology. In G. Alves., & J. García-Zubía (Eds.), Using remote labs in education (pp. 323–348). Bilbao/Spain.
Pleul, C., Terkowsky, C., Jahnke, I., & Tekkaya, A. E. (2011b). Platform for e-learning and tele-operative experimentation (petex)—holistically integrated laboratory experiments for manufacturing technology in engineering education. In J. Bernardino., & J. C. Quadrato (Eds.), Proceedings WEE2011. 1st World Engineering Education Flash Week in Lisbon, Portugal (pp. 578–585).
Pleul, C., Terkowsky, C., Jahnke, I., & Tekkaya, A. E. (2011c). Interactive demonstration of petex—Platform for e-learning and telemetric experimentation—Enhanced laboratory experiments for engineering education. In M. E. Auer & D. Ursuitu (Eds.), REV 2011 International Conference on Remote Engineering and Virtual Instrumentation, Brasov, Romania, Conference Proceedings (pp. 186–190). Vienna: IAOE.
Reeves, T., Herrington, J., & Oliver, R. (2005). Design research: A socially responsible approach to instructional technology research in higher education. Journal of Computing in Higher Education, 16, 97–116.
Reiber, K., & Tremp, P. (2007). Eulen nach Athen! Forschendes Lernen als Bildungsprinzip. In B. Berendt, H. -P. Voss., & J. Wildt (Eds.), Neues handbuch hochschullehre (Griffmarke A 3.6), Berlin: Raabe Verlag.
Reichert, R. (2011). Das E-Portfolio—Eine mediale Technologie zur Herstellung von Kontrolle und Selbstkontrolle in Bildungsprozessen. In T. Meyer et al. (Eds.), Kontrolle und Selbstkontrolle—Zur Ambivalenz von E-Portfolios in Bildungsprozessen. Wiesbaden: VS Verlag für Sozialwissenschaften—Springer Fachmedien Wiesbaden GmbH.
Reinmann, G., & Sippel, S. (2011). Königsweg oder Sackgasse?—E-Portfolios für das forschende Lernen. In T. Meyer et al. (Eds.), Kontrolle und Selbstkontrolle—Zur Ambivalenz von E-Portfolios in Bildungsprozessen. Wiesbaden: VS Verlag für Sozialwissenschaften—Springer Fachmedien Wiesbaden GmbH.
Rossi, P., Lipsey, M., & Freeman, H. (2004). Evaluation. A systematic approach (7th ed.). Thousand Oaks, CA: Sage.
Stahl, G., Koschmann, T., & Suthers, D. (2006). Computer-supported collaborative learning: An historical perspective. In R. K. Sawyer (Ed.), Cambridge handbook of the learning sciences (pp. 409–426). Cambridge: Cambridge University Press.
Suchman, L. (1987). Plans and situated actions: The problem of human-machine communication. New York: Cambridge Press.
Suchman, L. (2007). Human-machine reconfigurations: Plans and situated actions (2nd ed.). Cambridge: Cambridge Press.
Terkowsky, C., Jahnke, I., Pleul, C., Licari, R., Johannssen, P., Buffa, G. et al. (2010a). Developing tele-operated laboratories for manufacturing Engineering education. Platform for E-Learning and Telemetric Experimentation (PeTEX). International Journal of Online Engineering (iJOE). 6 Special Issue: REV2010 (pp. 60–70). Vienna: IAOE.
Terkowsky, C., Jahnke, I., Pleul, C., Licari, R., Johannssen, P., Buffa, G., et al. (2010b). Developing tele-operated laboratories for manufacturing Engineering education. Platform for E-Learning and Telemetric Experimentation (PeTEX). In M. E. Auer & G. Karlsson (Eds.), REV 2010 International Conference on Remote Engineering and Virtual Instrumentation, Stockholm, Sweden, Conference Proceedings (pp. 97–107). Vienna: IAOE.
Terkowsky, C., May, D., Haertel, T., & Pleul, C. (2012). Experiential remote lab learning with E-Portfolios—Integrating tele-operated experiments into environments for reflective learning. Proceedings of the 2012 ICL/IGIP Interactive Collaborative Learning & International Conference on Engineering Pedagogy, Villach/Austria.
Terkowsky, C., Pleul, C., Jahnke, I., & Tekkaya, A. E. (2011a). Tele-operated laboratories for online production Engineering education. Platform for E-Learning and Telemetric Experimentation (PeTEX). International Journal of Online Engineering (iJOE), 7, 37–43. Special Issue: Educon 2011, Vienna: IAOE.
Terkowsky, C., Pleul, C., Jahnke, I., & Tekkaya, A. E. (2011b). Platform for E-learning and telemetric experimentation (PeTEX)—Tele-operated laboratories for production engineering education. In M. E. Auer, Y. Al-Zoubi, & E. Tovar (Eds.), Proceedings of the 2011 I.E. Global Engineering Education Conference (EDUCON)—“Learning Environments and Ecosystems in Engineering Education” (pp. 491–497). Vienna: IAOE.
Terkowsky, C., Pleul, C., Jahnke, I., & Tekkaya, A. E. (2011c). Platform for E-learning and telemetric experimentation (PeTEX)—Tele-operated laboratories for production engineering education. In M. E. Auer, Y. Al-Zoubi, & E. Tovar (Eds.), Proceedings of the 2011 I.E. Global Engineering Education Conference (EDUCON)—“Learning Environments and Ecosystems in Engineering Education” (pp. 491–497). Vienna: IAOE.
Terkowsky, C., Pleul, C., Jahnke, I., & Tekkaya, A. E. (2011d). Forschendes Lernen mit PeTEX: Platform for eLearning and telemetric experimentation. In U. Bach, T. Jungmann, & K. Müller (Eds.), Praxiseinblicke Forschendes Lernen (pp. 28–31). Aachen: TeachING.LearnING.EU.
Tremp, P. (2005). Verknüpfung von Lehre und Forschung. Eine universitäre Tradition als didaktische Herausforderung. Beiträge zur Lehrerbildung, 23(3), 339–348.
Wang, F., & Hannafin, M. J. (2005). Design-based research and technology-enhanced learning environments. Educational Technology Research and Development, 53(4), 5–23.
Whitworth, B., & de Moor, A. (Eds.). (2009). Handbook of research on socio-technical design and social networking systems. IGI Global, Hershey/PA.
Acknowledgments
The PeTEX team would like to thank: Dr.-Ing. habil. S. Chatti, TU Dortmund University (IUL), and Dr.-Ing. U. Dirksen, Poynting GmbH, Dortmund, Germany as well as Prof. Dr. J. Wildt, M. Heiner, K. Heyder, M. Schaefer, TU Dortmund University (ZHB), and Prof. F. Micari, Prof. E. Lo Valvo, Prof. L. Fratini, Ph.D., R. Licari, Ph.D., G. Buffa, Department of Mechanical Technology, Production and Management Engineering (DTMPIG), University of Palermo, Italy, Prof. M. Nicolescu, P. Johansson, Kungliga Tekniska Högskolan (KTH), Department for Production Engineering, Stockholm, Sweden for their great cooperation during the project. Furthermore, we thank M. Spiess, M. Sappok, S. Grunert, M. Hoffrichter, TU Dortmund University (IUL), and N. Karacan from TU Dortmund University (HDZ) for elaborate web-authoring with LernBar and Moodle; Dr. P. Ilyes, Goethe-University Frankfurt/Germany (Science and Technology Studies, Institute for Cultural Anthropology and European Ethnology) for strong support; S. Voss, D. Weiß, A. Mereu, C. Bremer, R. Müller, A. Tillmann, and Prof. Dr. D. Krömker from studium-digitale—Central eLearning-Facility of Goethe-University Frankfurt/Germany for providing and supporting us with LernBar.
And last but not least we sincerely thank all our friends and colleagues (including us) at TeachING-LearnING.EU—the first subject center for engineering education in Germany—for great cooperation and support taking over new research and design projects in the field of online engineering education.
This project has been funded with support from the European Commission. Project-code: 142270-LLP-1-2008-1-DE-LEONARDO-LMP.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media New York
About this chapter
Cite this chapter
Terkowsky, C., Jahnke, I., Pleul, C., May, D., Jungmann, T., Tekkaya, A.E. (2013). PeTEX@Work: Designing CSCL@Work for Online Engineering Education. In: Goggins, S., Jahnke, I., Wulf, V. (eds) Computer-Supported Collaborative Learning at the Workplace. Computer-Supported Collaborative Learning Series, vol 14. Springer, Boston, MA. https://doi.org/10.1007/978-1-4614-1740-8_13
Download citation
DOI: https://doi.org/10.1007/978-1-4614-1740-8_13
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4614-1739-2
Online ISBN: 978-1-4614-1740-8
eBook Packages: Humanities, Social Sciences and LawEducation (R0)