Abstract
In the paper development of design wave simulator and hydraulic active heave compensation structure is presented. The system is consists of motion platform with two degrees of freedom and hydraulic motor which is used for compensation sea waves. The motion platform is used to simulate the wave effects, while the hydraulic motor is controlled by controller. Authors used an AHRS sensor to measure actual position of the steel load which is mounted at the end of the steel cable. On the AHRS sensor accelerometer, gyroscope and magnetometer are implemented. In addition, the Authors used two laser displacement sensors to measure the steel load position in two axes. Performed test included step response of hydraulic motor for different type of signals coming from motion platform and measured position of the steel load by laser displacement sensors and AHRS sensor.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cundiff, J.S.: Fluid Power Circuits and Controls: Fundamentals and Applications. CRC Press, Boca Raton (2001)
Chapple, P.: Principles of Hydraulic Systems Design. Momentum Press (2014)
Jakubowski, A., Kubacki, A.: Modelling and simulation of a hydraulic active heave compensation system. In: ITM Web of Conferences, vol. 15. EDP Sciences (2017)
Jakubowski, A., Kubacki, A., Rybarczyk, D.: Design of the test stand for hydraulic active heave compensation system. Arch. Mech. Technol. Mater. 37(1), 76–78 (2017)
Woodacre, J.K., Bauer, R.J., Irani, R.A.: A review of vertical motion heave compensation systems. Ocean Eng. 104, 140–154 (2015)
Walid, A.A., Gu, P., Hovland, G., Hansen, M.R., Iskandarani, G.Y.: Modeling and simulation of an active heave compensated draw-works. In: Proceedings, pp. 291–296 (2011)
Ni, J., Liu, S., Wang, M., Hu, X., Dai, Y.: The simulation research on passive heave compensation system for deep sea mining. In: Mechatronics and Automation (2009)
El-Hawary, F.: Compensation for source heave by use of a Kalman filter. IEEE J. Oceanic Eng. 7(2), 89–96 (1982)
Huang, L., Zhang, Y., Zhang, L., Meiying, L.I.U.: Semi-active drilling draw works heave compensation system. Petrol. Explor. Dev. 40(5), 665–670 (2013)
Sanfilippo, F., Hatledal, L.I., Zhang, H., Rekdalsbakken, W., Pettersen, K.Y.: A wave simulator and active heave compensation framework for demanding offshore crane operations. In: Electrical and Computer Engineering (CCECE) (2015)
Kjelland, M.B., Hansen, M.R.: Offshore wind payload transfer using flexible mobile crane (2015)
Jakubowski, A., Milecki, A.: The investigations of hydraulic heave compensation system. In: Conference on Automation, pp. 380–391. Springer, Cham (2018)
Acknowledgments
The work described in this paper was funded from 02/22/DSMK/1458.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Jakubowski, A., Kubacki, A. (2020). Study on Wave Simulator and Hydraulic Active Heave Compensation Structure. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2019. AUTOMATION 2019. Advances in Intelligent Systems and Computing, vol 920. Springer, Cham. https://doi.org/10.1007/978-3-030-13273-6_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-13273-6_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-13272-9
Online ISBN: 978-3-030-13273-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)