Abstract
In the paper a reachability property of continuous-time linear systems with rectangular type inputs vector is addressed. Necessary and sufficient conditions for the existence of that type of input signals that steer the system from zero initial conditions to desired final state in assumed time are derived and proved. The computation method of the input signals vector set that are the solution to the problem is presented. Next, a minimum energy control problem is considered. Using an integral control performance index the minimum energy input vector is chosen from the set of consistent inputs. The considerations are illustrated by a numerical example of electrical circuit with pulse wave voltage sources, where the input signals that minimise assumed performance index are computed and applied to steer the electrical circuit to desired final state in given time.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Antsaklis, P., Michel, A.N.: Linear Systems. Birkhäuser, Boston (2006)
Kaczorek, T.: Linear Control Systems: Analysis of Multivariable Systems. Research Studies Press, New York (1992)
Kaczorek, T.: Positive 1D and 2D systems. In: Communication and Control Engineering. Springer, London (2002)
Kailath, T.: Linear Systems. Prentice-Hall, New York (1980)
Wang, C., Tao, Y., Yang, P.: Reachability of interval max-plus linear systems. In: Proceedings of the 36th Chinese Control Conference, Dalian, China, 26–28 July 2017, pp. 2392–2396 (2017). https://doi.org/10.23919/ChiCC.2017.8027716
Bartosiewicz, Z.: Local positive reachability of nonlinear continuous-time systems. IEEE Trans. Autom. Control 12, 4217–4221 (2016). https://doi.org/10.1109/TAC.2015.2511921
Villegas Pico H.N., Aliprantis D.C., Sudhoff S.D.: Reachability analysis of shipboard power systems with uncertain pulsed loads. In: IEEE Electric Ship Technologies Symposium (ESTS), Old Town Alexandria, 21–24 June 2015, pp. 395–402 (2015). https://doi.org/10.1109/ESTS.2015.7157925
Rogowski, K.: Reachability of standard and fractional continuous-time systems with constant inputs. Arch. Control Sci. 2, 147–159 (2016). https://doi.org/10.1515/acsc-2016-0008
Rogowski, K.: Reachability of standard and fractional continuous-time systems with piecewise constant inputs. In: Szewczyk, R., Zielinski, C., Kaliczynska, M. (eds.) Challenges in Automation, Robotics and Measurement Techniques, Proceedings of Automation–2016, Warsaw, Poland, 2–4 March 2016, vol. 440, pp. 241–249. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-29357-8_31
Lewis, F., Vrabie, D., Syrmos, V.: Optimal Control, 3rd edn. Wiley, New York (2012)
Kaczorek, T.: An extension of Klamka’s method of minimum energy control to fractional positive discrete-time linear systems with bounded inputs. Bull. Pol. Acad. Sci. Tech 2, 227–231 (2014). https://doi.org/10.2478/bpasts-2014-0022
Kang, J., Tang, W.: Minimum energy control of 2D singular systems with constrained controls. In: International Conference on Machine Learning and Cybernetics, Guangzhou, China, New York, 18–21 August 2005, pp. 1244–1248 (2005). https://doi.org/10.1109/ICMLC.2005.1527134
Klamka, J.: Controllability and minimum energy control problem of fractional discrete-time systems. In: New Trends in Nanotechnology and Fractional Calculus Applications, pp. 503–509. Springer (2010)
Sajewski, L.: Reachability, observability and minimum energy control of fractional positive continuous-time linear systems with two different fractional orders. Multidimension. Syst. Signal Process. 1 27–41 (2016). https://doi.org/10.1007/s11045-014-0287-2
Schwartz, C.A., Maben, E.: A minimum energy approach to switching control for mechanical systems. In: Stephen Morse, A. (ed.) Control Using Logic-Based Switching. LNCIS. Springer, Germany (1997)
Sajewski, L.: Reachability of fractional positive continuous-time linear systems with two different fractional orders. In: Szewczyk, R., Zielinski, C., Kaliczynska, M. (ed.) Recent Advances in Automation, Robotics and Measuring Techniques: Proceedings of Automation–2014, Warsaw, Poland, 26–28 March 2014, vol. 267, pp. 239–249. Springer, Cham (2014). https://doi.org/10.1007/978-3-319-05353-0_24
Gantmacher, F.R.: The Theory of Matrices. vol. I and II (translated by Hirsch KA). Chelsea Publishing Co., New York (1959)
Kaczorek, T.: Vectors and Matrices in Automation and Electrotechnics. WNT, Warsaw (1998). (in Polish)
Acknowledgements
This work was supported by National Science Centre in Poland under work No. 2017/27/B/ST7/02443.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Rogowski, K. (2020). Minimum Energy Control and Reachability of Continuous-Time Linear Systems with Rectangular Inputs. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2019. AUTOMATION 2019. Advances in Intelligent Systems and Computing, vol 920. Springer, Cham. https://doi.org/10.1007/978-3-030-13273-6_21
Download citation
DOI: https://doi.org/10.1007/978-3-030-13273-6_21
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-13272-9
Online ISBN: 978-3-030-13273-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)