Abstract
The existing small-bore in-pipe robots are difficult to pass through complicated pipelines such as T-branch pipeline. Aiming at the challenge, this study designs an active steering robot with better flexibility and over-bending capability, which is suitable for small pipelines inspection. It is made of compliant silica gel and 3D printed mold and consists mainly of three parts, wherein the middle axial actuator has three uniform fan-shaped cavities through special design. The air pressure of the three cavities can be adjusted according to different turning requirements to realize active turning in the pipeline. In addition, the kinematics model of the in-pipe robot is established, and the relationship between the center position of the robot head and the air pressure of the three cavities is deduced, which provides theoretical support for the motion control of the robot. Finally, the accuracy of the model and the performance of the robot are verified by the experiments.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Okada, T., Sanemori, T.: MOGRER: a vehicle study and realization for in-pipe inspection tasks. IEEE J. Robot. & Autom. 3(6), 573–582 (1987)
Hirose, S., Ohno, H., Mitsue, T.: Design of in-pipe inspection vehicles for Φ25, Φ50, Φ150 pipes. In: Proceedings of IEEE International Conference of Robotics and Automation, pp. 2309–2314 (1999)
Roh, S.G., Choi, H.R.: Differential-drive in-pipe robot for moving inside urban gas pipelines. IEEE Trans. Rob. 21(1), 1–17 (2005)
Rome, E., Hertzberg, J., Kirchner, F.: Towards autonomous sewer robots: the MAKRO project. Urban Water 1(1), 57–70 (1999)
Roh, S.G., Ryew, S.M., Yang, J.H.: Actively steerable in-pipe inspection robots for underground urban gas pipelines. In: Proceedings 2001 ICRA IEEE International Conference on Robotics and Automation (Cat. No. 01CH37164), vol. 1, pp. 761–766. IEEE (2001)
Transeth, A.A., Leine, R.I., Glocker, C.: Snake robot obstacle-aided locomotion: modeling, simulations, and experiments. IEEE Trans. Rob. 24(1), 88–104 (2008)
Liljebäck, P., Pettersen, K.Y., Stavdahl, Ø.: A review on modelling, implementation, and control of snake robots. Robot. Autom. Syst. 60(1), 29–40 (2012)
Transeth, A.: 3-D snake robot motion: nonsmooth modeling, simulations, and experiments. IEEE Trans. Rob. 24(2), 361–376 (2008)
Fukuda, T.: Rubber gas actuator driven by hydrogen storage alloy for in-pipe inspection mobile robot with flexible structure. In: IEEE International Conference on Robotics & Automation. IEEE (1989)
Bertetto, A.M., Ruggiu, M.: In-pipe inch-worm pneumatic flexible robot. In: 2001 IEEE ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No. 01TH8556), vol. 2, pp. 1226–1231. IEEE (2001)
Martinez, R.V., Branch, J.L., Fish, C.R.: Robotic tentacles with three-dimensional mobility based on flexible elastomers. Adv. Mater. 25(2), 205–212 (2013)
Heung, H.L., Chiu, P.W.Y., Li, Z.: Design and prototyping of a soft earthworm-like robot targeted for GI tract inspection. In: 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 497–502. IEEE (2016)
Calderón, A.A., Ugalde, J.C., Zagal, J.C.: Design, fabrication and control of a multi-material-multi-actuator soft robot inspired by burrowing worms. In: 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 31–38. IEEE (2016)
Suzumori, K., Endo, S., Kanda, T.: A bending pneumatic rubber actuator realizing soft-bodied manta swimming robot. In: Proceedings 2007 IEEE International Conference on Robotics and Automation, pp. 4975–4980. IEEE (2007)
Galloway, K.C., Polygerinos, P., Walsh, C.J.: Mechanically programmable bend radius for fiber-reinforced soft actuators. In: 2013 16th International Conference on Advanced Robotics (ICAR), pp. 1–6. IEEE (2013)
Galloway, K.C., Becker, K.P., Phillips, B.: Soft robotic grippers for biological sampling on deep reefs. Soft Robot. 3(1), 23–33 (2016)
Schulke, M., Hartmann, L., Behn, C.: Worm-like locomotion systems: development of drives and selective anisotropic friction structures. Universitätsbibliothek Ilmenau (2011)
Polygerinos, P., Wang, Z., Galloway, K.: Soft robotic glove for combined assistance and at-home rehabilitation. Robot. Autom. Syst. 73, 135–143 (2014)
Webster, R.J., Jones, B.A.: Design and kinematic modeling of constant curvature continuum robots: a review. Int. J. Robot. Res. 29(13), 1661–1683 (2010)
Giannaccini, M.E., Xiang, C., Atyabi, A.: Novel design of a soft lightweight pneumatic continuum robot arm with decoupled variable stiffness and positioning. Soft Robot. 5(1), 54–70 (2018)
Acknowledgment
This study was supported by National Natural Science Foundation of China (Grant No.61773254), Shanghai Sailing Program (Grant No. 17YF1406200), Shanghai Y-oung Eastern Scholar Program (Grant No. QD2016029), and Shanghai civil-military integration program (Grant No. JMRH-2018-1043).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Li, T. et al. (2019). An Active Steering Soft Robot for Small-Bore T-Branch Pipeline. In: Yu, H., Liu, J., Liu, L., Ju, Z., Liu, Y., Zhou, D. (eds) Intelligent Robotics and Applications. ICIRA 2019. Lecture Notes in Computer Science(), vol 11741. Springer, Cham. https://doi.org/10.1007/978-3-030-27532-7_49
Download citation
DOI: https://doi.org/10.1007/978-3-030-27532-7_49
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27531-0
Online ISBN: 978-3-030-27532-7
eBook Packages: Computer ScienceComputer Science (R0)