Abstract
Determination of parameters of anhysteretic magnetization curve plays the key role in modelling the characteristics of soft magnetic materials. This curve can be efficiently used to describe the characteristics of inductive components in SPICE or FEM modelling. Moreover, anhysteretic magnetization curve is the base of Jiles-Atherton model of magnetic hysteresis loop. Paper presents the method of identification of parameters of anhysteretic curves of soft magnetic materials without or with different types of anisotropy. Due to the fact, that calculation of anhysteretic curve of anisotropic materials requires numerical integration, optimization-based method is proposed. Moreover, open-source MATLAB/Octave scripts are provided to verify and validate proposed method for variety of anisotropic materials.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Mészáros, I., Vértesy, G.: Modelling of normal magnetization curves of soft magnetic alloys. Mater. Sci. Forum 659, 429–434 (2010). https://doi.org/10.4028/www.scientific.net/msf.659.429
Górecki, K., Rogalska, M., Zarȩbski, J., Detka, K.: Modelling characteristics of ferromagnetic cores with the influence of temperature. J. Phys.: Conf. Ser. 494, 012016 (2014). https://doi.org/10.1088/1742-6596/494/1/012016
Szewczyk, R.: Technical B-H saturation magnetization curve models for SPICE, FEM and MoM simulations. J. Autom. Mob. Robot. Intell. Syst. 10(2), 3–8 (2016). https://doi.org/10.14313/jamris_2-2016/10
Nowicki, M.: Anhysteretic magnetization measurement methods for soft magnetic materials. Materials 11, 2021 (2018). https://doi.org/10.3390/ma11102021
Szewczyk, R.: The method of moments in Jiles-Atherton model based magnetostatic modelling of thin layers. Arch. Electr. Eng. 67, 27–35 (2018). https://doi.org/10.24425/118989
Jiles, D.C., Atherton, D.L.: Theory of ferromagnetic hysteresis. J. Magn. Magn. Mater. 61, 48–60 (1986). https://doi.org/10.1016/0304-8853(86)90066-1
Jiles, D.C., Thoelke, J.B., Devine, M.K.: Numerical determination of hysteresis parameters for the modeling of magnetic properties using the theory of ferromagnetic hysteresis. IEEE Trans. Magn. 28(1), 27–35 (1992). https://doi.org/10.1109/20.119813
Szewczyk, R., Bieńkowski, A.: Magnetoelastic Villari effect in high-permeability Mn–Zn ferrites and modeling of this effect. J. Magn. Magn. Mater. 254–255, 284–286 (2003). https://doi.org/10.1016/s0304-8853(02)00784-9
Liu, J., Zhang, H., Shan, N., Sha, Y., Zhang, F., Zuo, L.: Improvement of texture and magnetic properties in 4.5 wt.% Si grain-oriented electrical steels. Mater. Res. 22(suppl 2) (2019). https://doi.org/10.1590/1980-5373-mr-2018-0756
Najgebauer, M.: Scaling-based analysis and modelling of power losses in amorphous and nanocrystalline alloys. Acta Physica Polonica A 131(5), 1225–1228 (2017). https://doi.org/10.12693/aphyspola.131.1225
Hawelek, L., Warski, T., Wlodarczyk, P., Polak, M., Zackiewicz, P., Radon, A., Wojcik, A., Kolano-Burian, A.: Effect of co substitution on crystallization and magnetic behavior of Fe85.45−xCoxCu0.55B14 metallic glass. Materials 13(4), 919 (2020). https://doi.org/10.3390/ma13040919
Kittel, C.: Introduction to Solid State Physics. Wiley, Hoboken (2004)
Ramesh, A., Jiles, D.C., Bi, Y.: Generalization of hysteresis modeling to anisotropic materials. J. Appl. Phys. 81, 5585 (1997). https://doi.org/10.1063/1.364843
Szewczyk, R.: Validation of the anhysteretic magnetization model for soft magnetic materials with perpendicular anisotropy. Materials 7, 5109–5116 (2014). https://doi.org/10.3390/ma7075109
Ramesh, A., Jiles, D.C., Roderik, J.: A model of anisotropic anhysteretic magnetization. IEEE Trans. Magn. 32, 4234–4236 (1999). https://doi.org/10.1109/20.539344
Baghel, A.P.S., Kulkarni, S.V.: Hysteresis modeling of the grain-oriented laminations with inclusion of crystalline and textured structure in a modified Jiles-Atherton model. J. Appl. Phys. 113(4), 043908 (2013). https://doi.org/10.1063/1.4788806
Laurie, P.D.: Calculation of Gauss-Kronrod quadrature rules. Math. Comput. 66(219), 1133–1146 (1997). https://doi.org/10.1090/s0025-5718-97-00861-2
Chwastek, K., Szczyglowski, J.: Identification of a hysteresis model parameters with genetic algorithms. Math. Comput. Simul. 71(3), 206–211 (2006). https://doi.org/10.1016/j.matcom.2006.01.002
Nelder, J.A., Mead, R.: A simplex method for function minimization. Comput. J. 7(4), 308–313 (1965). https://doi.org/10.1093/comjnl/7.4.308
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Szewczyk, R. (2021). Estimation of the Parameters of Anhysteretic Curve of Isotropic and Anisotropic Magnetic Materials on the Base of Initial Anhysteretic Permeability Measurements. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2021: Recent Achievements in Automation, Robotics and Measurement Techniques. AUTOMATION 2021. Advances in Intelligent Systems and Computing, vol 1390. Springer, Cham. https://doi.org/10.1007/978-3-030-74893-7_38
Download citation
DOI: https://doi.org/10.1007/978-3-030-74893-7_38
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-74892-0
Online ISBN: 978-3-030-74893-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)