Abstract
Mixed Reality are considered enabling technologies for the Industry 4.0 paradigm. In this paper, the cockpit control device design and evaluation system based on mixed reality technology is established, which is suitable for rapid iteration in the initial stage of civil aircraft design. It can provide aircraft designers with a more efficient and realistic design environment. It also provides a user evaluation environment, allowing pilots to participate in the cockpit design at an early stage of the design. According to the operation task and operation pattern classifying of common control equipment in the cockpit, also determines the control unit from the industrial model to virtual reality model of the conversion process. The conversion process of the control device from industrial model to virtual reality model is determined. The paper also puts forward the design mode of double coordinate system based on design eye reference point and controller panel, which is suitable for the design process of civil aircraft cockpit. For the system, we also conducted a preliminary user research and analysis. The experimental and analysis results are used for the subsequent system design and upgrading. It provides useful guidance for the design of human-computer interaction interface in mixed reality environment.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
EN ISO 9241-210:2010-10
Wang, G.G.: Definition and review of virtual prototyping. J. Comput. Inf. Sci. Eng. 2(3), 232–236 (2002)
Joyce, R., Robinson, S.K.: Evaluation of a virtual reality environment for cockpit design. In: Proceedings of the Human Factors and Ergonomics Society Annual Meeting, vol. 63, no. 1, pp. 2328–2332 (2019)
IEA. Definition and Domains of Ergonomics (2000)
Yang, L.Q.: Summarization of human body molding technology development for man-machine engineering field. J. Acad. Armored Force Eng. 20(2), 59–63 (2006)
Chaffin, D.B.: Improving digital human modelling for proactive ergonomics in design. Ergonomics 48(5), 478–491 (2005). https://doi.org/10.1080/00140130400029191
Mohan, D.B., Jeevitha, S., Prabhakar, G., Saluja, K.S., Biswas, P.: Estimating pilots’ cognitive load from ocular parameters through simulation and in-flight studies. J. Eye Mov. Res. 12(3) (2019)
Ramacci, C.A., Ottalevi, A., Modugno, G., Meineri, G., Berti, R.: [Behavior of central critical fusion frequency of the retina and various cardiocirculatory parameters (ECG, humeral arterial pressure and heart rate) in military jet pilots before and after operational flight]. Riv. Med. Aeronaut. Spaz. 47(1–4), 55–64 (1982)
Mohino-Herranz, I., Gil-Pita, R., Ferreira, J., Rosa-Zurera, M., Seoane, F.: Assessment of mental, emotional and physical stress through analysis of physiological signals using smartphones. Sensors 15(10), 25607–25627 (2015)
Gentili, R.J., Rietschel, J.C., Jaquess, K.J., Lo, L.C., Hatfield, B.D.: Brain biomarkers based assessment of cognitive workload in pilots under various task demands. In: Conference on Proceedings of IEEE Engineering in Medicine and Biology Society (2014)
Kalawsky, R.S., Wesley, A.: The Science of Virtual Reality and Virtual Environments. Addison Wesley Longman Publishing Co., Inc., Boston (1993)
Aromaa, S., Väänänen, K.: Suitability of virtual prototypes to support human factors/ergonomics evaluation during the design. Appl. Ergon. 56, 11–18 (2016)
Chen, B., Qin, X.: Composition of virtual-real worlds and intelligence integration of human-computer in mixed reality. Sci. China (Inf. Sci) 46(12), 11 (2016)
Borst, C., Volz, R.: Evaluation of a haptic mixed reality system for interactions with a virtual control panel. Presence 14(6), 677–696 (2005)
Lee, L.H., Hui, P.: Interaction methods for smart glasses: a survey. IEEE Access 6, 28712–28732 (2018)
Tian, G.: Research on the human factors Design principle of A380 aircraft based on Reverse engineering methods Civil Aviation Flight University of China (2013)
Wang, Y., Guo, X., Liu, Q., Xiao, H., Bai, Y.: Three-dimensional measurement applied in design eye point of aircraft cockpits. Aerosp. Med. Hum. Perform. 89(4), 371–376 (2018)
Caputo, A., Jacota, S., Krayevskyy, S., Pesavento, M., Giachetti, A.: XR-Cockpit: a comparison of VR and AR solutions on an interactive training station. In: ETFA 2020: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020 (2020)
Hattori, K., Hirai, T.: Inside-out tracking controller for VR/AR HMD using image recognition with smartphones. In: SIGGRAPH 2020: Special Interest Group on Computer Graphics and Interactive Techniques Conference (2020)
Kress, B.C., Cummings, W.J.: 11‐1: invited paper: towards the ultimate mixed reality experience: HoloLens display architecture choices. In: SID Symposium Digest of Technical Papers, vol. 48, no. 1 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this paper
Cite this paper
Guo, W., Wang, X., Deng, Z., Li, H. (2022). A Civil Aircraft Cockpit Control Device Design Using Mixed Reality Device. In: Chen, J.Y.C., Fragomeni, G. (eds) Virtual, Augmented and Mixed Reality: Applications in Education, Aviation and Industry. HCII 2022. Lecture Notes in Computer Science, vol 13318. Springer, Cham. https://doi.org/10.1007/978-3-031-06015-1_14
Download citation
DOI: https://doi.org/10.1007/978-3-031-06015-1_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-06014-4
Online ISBN: 978-3-031-06015-1
eBook Packages: Computer ScienceComputer Science (R0)