Abstract
Buckling of thin walled welded structures is one of the most common failure modes experienced by these structures in-service. The study of such buckling, to date, has been concentrated on experimental tests, empirical models and the use of numerical methods such as the Finite Element Method (FEM). Some researchers have combined the FEM with Artificial Neural Networks (ANN) to study both open and closed section structures but these studies have not considered imperfections such as holes, weld seams and residual stresses. In this paper, we have used a combination of FEM and ANN to obtain predictive models for the critical buckling load and lateral displacement of the center of the profile under compressive loading. The study was focused on ordinary Rectangular Hollow Sections (RHS) and on the influence of geometric imperfections while taking residual stresses into consideration.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Akesson, B.: Plate Buckling in Bridges and Other Structures. Taylor & Francis (2007)
Johnston, B.: Column Buckling Theory: Historic Highlights. Journal of Structural Engineering 109(9), 2086–2096 (1983)
EN 1993 - Eurocode 3: Design of steel structures (1993)
Corchado, E., Herrero, Á.: Neural visualization of network traffic data for intrusion detection. Applied Soft Computing 11(2), 2042–2056 (2011)
Sedano, J., Curiel, L., Corchado, E., de la Cal, E., Villar, J.: A soft computing method for detecting lifetime building thermal insulation failures. Integrated Computer-Aided Engineering 17(2), 103–115 (2010)
Ripley, B.D.: Pattern Recognition and Neural Networks. Cambridge University Press, Cambridge (1996)
Timoshenko, S.P., Gere, J.M.: Theory of Elastic Stability, 2nd edn. McGraw-Hill (1961)
Crisfield, M.A.: Large-deflection elasto-plastic buckling analysis of eccentrically stiffened plates using finite elements (1976)
El-Sawy, K.M., Elshafei, A.L.: Neural network for the estimation of the inelastic buckling pressure of loosely fitted liners used for rigid pipe rehabilitation. Thin-walled Structures 41(8), 785–800 (2003)
Waszczyszyn, Z., Bartczak, M.: Neural prediction of buckling loads of cylindrical shells with geometrical imperfections. International Journal of Non-linear Mechanics 37(4), 763–775 (2002)
Sadovský, Z., Guedes Soares, C.: Artificial neural network model of the strength of thin rectangular plates with weld induced initial imperfections. Reliability Engineering & System Safety 96(6), 713–717 (2011)
Venables, W.N., Ripley, B.D.: Modern Applied Statistics with S, 4th edn. Springer (2002)
Team RC: R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria (2012) ISBN 3-900051-07-0, http://www.R-project.org/
Fernández, R., Lostado, R., Fernandez, J., Martinez-de-Pison, F.J.: Comparative analysis of learning and meta-learning algorithms for creating models for predicting the probable alcohol level during the ripening of grape berries. Computers and Electronics in Agriculture 80, 54–62 (2012)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Fernández-Martínez, R., Lostado-Lorza, R., Illera-Cueva, M., Mac Donald, B.J. (2014). Modeling Structural Elements Subjected to Buckling Using Data Mining and the Finite Element Method. In: Herrero, Á., et al. International Joint Conference SOCO’13-CISIS’13-ICEUTE’13. Advances in Intelligent Systems and Computing, vol 239. Springer, Cham. https://doi.org/10.1007/978-3-319-01854-6_28
Download citation
DOI: https://doi.org/10.1007/978-3-319-01854-6_28
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-01853-9
Online ISBN: 978-3-319-01854-6
eBook Packages: EngineeringEngineering (R0)