Abstract
This paper presents identification of heat characteristic of plasmatron powered plasma reactor designed and build in Industrial Research Institute for Automation and Measurements. Plasma reactor is the key element of the test setup, designed to research processing and recovery of metals from waste of electric and electronic equipment, focusing on electronic printed circuit boards. Identification was based on step response of the reactor, to step input power of the plasmatrons. Two experiments were carried out. First experiment with power of 36 kW, and second experiment using 29 kW. In each experiment two temperatures were measured in two points of the reactor chamber, allowing identification of four thermal responses. Object transfer function G(s) was assumed as second order inertial. This assumption was confirmed during identification. The model will be utilized for determination of PID controller with additional functionality.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Huisman, J.: Review of Directive 2002/96 on WEEE, Final Report, United Nations University (2007)
Cobbing, M.:Toxic Tech: Not In Our Backyard, Greenpeace.org (2008)
Lee, J., Song, H., Yoo, J.: Present status of the recycling of waste electrical and electronic equipment in Korea. Resources Conservation & Recycling (50), 380â397 (2007)
Kang, H., Schoenung, J.: Electronic waste recycling: A review of U.S. infrastructure and technology options. Resources Conservation & Recycling (45), 368â400 (2005)
Wawrzonek, R.: âPraktyczne aspekty funkcjonowania systemu gospodarowania zuĆŒytym sprzÄtem elektrycznym i elektronicznymâ, Elektro Eco (2009)
Environment Commission proposes revised laws on recycling and use of hazardous substances in electrical and electronic equipment, http://europa.eu/rapid/pressReleasesAction.do?reference=IP/08/1878&format=HTML&aged=1&language=EN&guiLanguage=en
SzaĆatkiewicz, J., Szewczyk, R.: Intelligent Utilization of Waste of Electrical and Electronic Equipment (Weee) with Robotized Tool. Journal of Automation, Mobile Robotics & Intelligent Systems 6(4) (2012)
Szewczyk, R., SzaĆatkiewicz, J., Budny, E., Missala, T., Winiarski, W.: Identyfikacja wybranych parametrĂłw plazmotronowego reaktora plazmowego. Pomiary Automatyka Robotyka (11) (2012)
SzaĆatkiewicz, J., Szewczyk, R., Budny, E., Missala, T., Winiarski, W.: Determination of PID control parameters of plasmatron plasma reactor. Journal of Applied Computer Science Methods 4(2) (2012)
SzaĆatkiewicz, J., Szewczyk, R., Budny, E., Missala, T., Winiarski, W.: Construction aspects of plasma based technology for waste of electrical and electronic equipment (WEEE) management in urban areas. Procedia Engineering 57, 1101â1108 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
SzaĆatkiewicz, J., Szewczyk, R., Budny, E., Missala, T., Winiarski, W. (2014). Identification of Thermal Response, of Plasmatron Plasma Reactor. In: Szewczyk, R., ZieliĆski, C., KaliczyĆska, M. (eds) Recent Advances in Automation, Robotics and Measuring Techniques. Advances in Intelligent Systems and Computing, vol 267. Springer, Cham. https://doi.org/10.1007/978-3-319-05353-0_26
Download citation
DOI: https://doi.org/10.1007/978-3-319-05353-0_26
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-05352-3
Online ISBN: 978-3-319-05353-0
eBook Packages: EngineeringEngineering (R0)