Abstract
Application of autonomous control for shop-floor scheduling by considering real-time control of material flows is advantageous to those assembly lines with dynamic and uncertain circumstances. Among several potential processors with computing and communication capabilities—for representing autonomous material carriers—wireless sensor nodes seem as promising objects to be applied in practice. For realizing autonomy in making scheduling and routing-control decisions some methodologies need to be embedded in the nodes. Among several experimented methodologies, e.g., artificial intelligence, genetic algorithm, etc., in the context of a doctoral research, in this current special case of assembly scenario, the queuing theory and its simple equations seem quite suitable. For instance, employment of Little’s law for calculating and analysis of simple queuing structures is a favorable method for autonomous pallets in real shop-floors. Concerning the simplicity and inexpensive computing loads of such a rule, it suits the best to the low capacity wireless sensors in developing pilot prototypes of autonomous carriers. Little’s law can be used to estimate the current waiting times of alternative stations and try to find a non-decreasing order of operations to improve the performance record (e.g., makespan) of the entire assembly system. To develop a pilot prototype, some wireless sensors—representing pallets in practice—are connected to a simulated assembly scenario via the TCP/IP protocol to evaluate the feasibility of realizing autonomous pallets in the practice of shop-floor control. Nevertheless, wireless nodes are distributed objects, so the use of data sharing for transferring low data between each other and respectively low energy consumption is necessary.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bilgen B, Günther HO (2010) Integrated production and distribution planning in the fast moving consumer goods industry: a block planning application. OR Spectr 32(4):927–955
Cooper RB (1981) Introduction to queueing theory, 2nd edn. North Holland, New York
Dombacher C (2009) Stationary queueing models with aspects of customer impatience and retrial behaviour. Telecom 131. http://www.telecomm.at/documents/Stationary_QM.pdf. Accessed 01 Nov 2013
Farahani S (2008) ZigBee wireless networks and transceivers. Elsevier, Amsterdam
Gross D, Shortle JF, Thompson JM, Harris CM (2008) Fundamentals of queueing theory. Wiley, New York
Mehrsai A, Scholz-Reiter B (2011) Towards learning pallets applied in pull control job-open shop problem. In: IEEE international symposium on assembly and manufacturing (ISAM), pp 1–6
Mehrsai A, Karimi HR, Thoben K-D, Scholz-Reiter B (2013) Application of learning pallets for real-time scheduling by the use of radial basis function network. Neurocomputing 101:82–93
Ouazene Y, Chehade H, Yalaoui A, Yalaoui F (2013) Equivalent machine method for approximate evaluation of buffered unreliable production lines. In: IEEE workshop on computational intelligence in production and logistics systems (CIPLS), pp 33–39
Polastre J, Szewczyk R, Culler D (2005) Telos: enabling ultra-low power wireless research. In: Fourth international symposium on information processing in sensor networks, pp 364–369
Ravindran A (2008) Operations research and management science handbook. CRC
Ruiz-Garcia L, Lunadei L, Barreiro P, Robla I (2009) A review of wireless sensor technologies and applications in agriculture and food industry: state of the art and current trends. Sensors 9(6):4728–4750
Son VQ (2011) Modeling and implementation of wireless sensor networks for logistics applications. Dissertation, University of Bremen
Son VQ, Wenning B, Görg C, Timm-Giel A (2010) WiSeCoMaSys: a tool for data collection and management of wireless sensor networks. In: International conference on advanced technologies for communications (ATC), pp 33–38
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Mehrsai, A., Karimi, HR., Thoben, KD., Scholz-Reiter, B. (2016). Pilot Prototype of Autonomous Pallets and Employing Little’s Law for Routing. In: Kotzab, H., Pannek, J., Thoben, KD. (eds) Dynamics in Logistics. Lecture Notes in Logistics. Springer, Cham. https://doi.org/10.1007/978-3-319-23512-7_10
Download citation
DOI: https://doi.org/10.1007/978-3-319-23512-7_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-23511-0
Online ISBN: 978-3-319-23512-7
eBook Packages: EngineeringEngineering (R0)