Abstract
In practice, to deal with emergency situations, emergency braking of overhead cranes plays an important role to ensure safety. However, a sudden braking of the trolley may cause uncontrollable swing of the payload, which is very dangerous and can probably lead to collision and even accidents. Therefore a proper emergency braking method with the consideration of payload swing suppression is of great importance. In this paper, we propose a novel method to achieve the emergency braking objective of overhead crane systems. In particular, after deep analysis, the control objective is divided into two parts. Then two kinds of control methods are proposed to achieve the corresponding objective. After that, we combine these control methods together and propose a novel emergency braking control method, which can ensure trolley braking, as well as payload swing suppression simultaneously. At last, simulation results are included to illustrate the superior control performance of the proposed method.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Fang, Y., Wang, P., Sun, N., Zhang, Y.: Dynamics analysis and nonlinear control of an offshore boom crane. IEEE Trans. Industr. Electron. 61, 414–427 (2014)
Liu, Y., Yu, H.: A survey of underactuated mechanical systems. IET Control Theory and Appl. 7, 921–935 (2013)
Singhose, W., Kim, D., Kenison, M.: Input shaping control of double-pendulum bridge crane oscillations. ASME J. Dyn. Syst. Meas. Control 130, 1–7 (2008)
Blackburn, D., Singhose, W., Kitchen, J., Patrangenaru, V., Lawrence, J., Kamoi, T., Taura, A.: Command shaping for nonlinear crane dynamics. J. Vib. Control 16, 477–501 (2010)
Vaughan, J., Kim, D., Singhose, W.: Control of tower cranes with double-pendulum payload dynamics. IEEE Trans. Control Syst. Technol. 18, 1345–1358 (2010)
Sun, N., Fang, Y., Zhang, X.: Energy coupling output feedback control of 4-DOF uunderactuated cranes with saturated inputs. Automatica 49, 1318–1325 (2013)
Sun, N., Fang, Y.: New energy analytical results for the regulation of underactuated overhead cranes: and end-effector motion-based approach. IEEE Trans. Industr. Electron. 59, 4723–4734 (2012)
Almutairi, N.B., Zribi, M.: Sliding mode control of a three-dimensional overhead crane. J. Vib. Control 15, 1679–1730 (2009)
Xi, Z., Hesketh, T.: Discrete time integral sliding mode control for overhead crane with uncertainties. IET Control Theory Appl. 4, 2071–2081 (2010)
Sun, N., Fang, Y., Chen, H.: A new antiswing control method for underactuated cranes with unmodeled uncertainties: theoretical design and hardware eexperiments. IEEE Trans. Industr. Electron. 62, 453–465 (2015)
Yang, J., Yang, K.: Adaptive coupling control for overhead crane systems. Mechatronics 17, 143–152 (2007)
Yang, J., Shen, S.: Novel approach for adaptive tracking control of a 3-D overhead crane system. J. Intell. Rob. Syst. 62, 59–80 (2011)
Lee, H.: Motion planning for three-dimensional overhead cranes with high-speed lload hoisting. Int. J. Control 78, 875–886 (2005)
Uchiyama, N., Ouyang, H., Sano, S.: Simple rotary crane dynamics modeling and open-loop control for residual load sway suppression by only horizontal boom motion. Mechatronics 23, 1223–1236 (2013)
Wu, Z., Xia, X.: Optimal motion planning for overhead cranes. IET Control Theory Appl. 8, 1833–1842 (2014)
Zhao, Y., Gao, H.: Fuzzy-model-based control of an overhead crane with input delay and actuator saturation. IEEE Trans. Fuzzy Syst. 20, 181–186 (2012)
Nakazono, K., Ohnishi, K., Kinjo, H., Yamamoto, T.: Load swing suppression for rotary crane system using direct gradient descent controller optimized by genetic algorithm. Trans. Inst. Syst. Control Inf. Eng. 22, 303–310 (2011)
Lee, L.-H., Huang, P.-H., Shih, Y.-C., Chiang, T.-C., Chang, C.-Y.: Parallel neural network combined with sliding mode control in overhead crane control system. J. Vib. Control 20, 749–760 (2012)
Nakazono, K., Ohnishi, K., Kinjo, H., Yamamoto, T.: Vibration control of load for rotary crane system using neural network with GA-based training. Artif. Life Robot. 13, 98–101 (2008)
Duonga, S.C., Uezatob, E., Kinjob, H., Yamamotoc, T.: A hybrid evolutionary algorithm for recurrent neural network control of a three-dimensional tower crane. Autom. Constr. 23, 55–63 (2012)
Suh, J.-H., Lee, J.-W., Lee, Y.-J., Lee, K.-S.: Anti-sway position control of an automated ttransfer crane based on neural network predictive PID controller. J. Mech. Sci. Technol. 19, 505–519 (2005)
Ma, B., Fang, Y., Zhang, Y.: Switching-based emergency braking control for an overhead canre system. IET Control Theory Appl. 4, 1739–1747 (2010)
Acknowledgements
This work is supported by the National Natural Science Foundation of China under Grant 11372144 and 61503200 and by the Natural Science Foundation of Tianjin under Grant 15JCQNJC03800.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Chen, H., Fang, Y., Sun, N. (2016). A Novel Emergency Braking Method with Payload Swing Suppression for Overhead Crane Systems. In: Cheng, L., Liu, Q., Ronzhin, A. (eds) Advances in Neural Networks – ISNN 2016. ISNN 2016. Lecture Notes in Computer Science(), vol 9719. Springer, Cham. https://doi.org/10.1007/978-3-319-40663-3_28
Download citation
DOI: https://doi.org/10.1007/978-3-319-40663-3_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-40662-6
Online ISBN: 978-3-319-40663-3
eBook Packages: Computer ScienceComputer Science (R0)