Abstract
According to the laws of friction, in order to initiate a sliding motion between two objects, a tangential force larger than the maximum static friction force is required. This process is governed by a material constant called the coefficient of static friction. Therefore, it is of great utility for robots to know the coefficient of static friction between its gripper and the object being manipulated, especially when a stable and precise grip on an object is necessary. Furthermore, it is most useful if the robot can estimate the coefficient of static friction upon touching an object at the very beginning of a manipulation task, instead of having to further explore the object before it tries to move the object. Motivated by this issue, we have designed (and in this paper, further improved) a novel eight-legged tactile sensor to estimate the coefficient of static friction between a planar surface and the sensing components of the prototype sensor (which will also serve as the gripper). While the basic principle of the sensor is still unchanged, here we highlight some improvements to the sensor’s design and evaluation, including more robustly controlled frictional angles (vital for the accurate sensing) and the use of a programmable xyz-stage during evaluation. The coefficients of static friction between the sensor and nine different materials were estimated and compared to a measurement obtained via traditional methods as a reference. For all testing materials, the estimated ranges cover the corresponding reference values. Good conformance with the reference coefficients is also visually indicated from a least-square fitted line of the estimated coefficients, which has a gradient close to one and an r 2 value greater than 0.9.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Blau, P.J.: The significance and use of the friction coefficient. Tribol. Int. 34(9), 585–591 (2001)
Tremblay, M.R., Cutkosky, M.R.: Estimating friction using incipient slip sensing during a manipulation task. In: Proceedings of the IEEE International Conference on Robotics and Automation, vol. 1, pp. 429–434 (1993)
Patterson, R.W., Nevill, G.E.: The induced vibration touch sensor–a new dynamic touch sensing concept. Robotica 4, 27–31 (1986)
Dornfeld, D., Handy, C.: Slip detection using acoustic emission signal analysis. In: Proceedings of the IEEE International Conference Robotics and Automation, vol. 4, pp. 1868–1875 (1987)
Howe, R.D., Cutkosky, M.R.: Sensing skin acceleration for slip and texture perception. In: Proceedings of the IEEE International Conference on Robotics and Automation, vol. 1, pp. 145–150 (1989)
Canepa, G., et al.: Detection of incipient object slippage by skin-like sensing and neural network processing. IEEE Trans. Syst. Man Cybern. B Cybern. 28(3), 348–356 (1998)
Fujimoto, I., et al.: Development of artificial finger skin to detect incipient slip for realization of static friction sensation. In: Proceedings of the IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, pp. 15–20 (2003)
Chuang, C.-H., Liou, Y.-R., Chen, C.-W.: Detection system of incident slippage and friction coefficient based on a flexible tactile sensor with structural electrodes. Sens. Actuators A Phys. 188, 48–55 (2012)
Bicchi, A.: Intrinsic contact sensing for soft fingers. In: Proceedings of the IEEE International Conference on Robotics and Automation, vol. 2, pp. 968–973 (1990)
Bayrleithner, R., Komoriya, K.: Static friction coefficient determination by force sensing and its application. In: Proceedings of the IEEE/RSJ/GI International Conference on Intelligent Robots and Systems, vol. 3, pp. 1639–1646 (1994)
Shinoda, H., Sasaki, S., Nakamura, K.: Instantaneous evaluation of friction based on ARTC tactile sensor. In: Proceedings of the IEEE International Conference on Robotics and Automation, vol. 3, pp. 2173–2178 (2000)
Nakamura, K., Shinoda, H.: A tactile sensor instantaneously evaluating friction coefficients. In: Proceedings of the 11th IEEE International Conference on Solid-State Sensors and Actuators, pp. 1430–1433 (2001)
Maeno, T., Kawai, T., Kobayashi, K.: Analysis and design of a tactile sensor detecting strain distribution inside an elastic finger. In: Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, vol. 3, pp. 1658–1663 (1998)
Maeno, T., Kawamura, T., Cheng, S.-C.: Friction estimation by pressing an elastic finger-shaped sensor against a surface. IEEE Trans. Robot. Autom. 20(2), 222–228 (2004)
Chen, W., et al.: An eight-legged tactile sensor to estimate coefficient of static friction. In: 37th Annual IEEE International Conference Engineering in Medicine and Biology Society, pp. 4407–4410 (2015)
Acknowledgments
The authors are indebted to Mr. Yuanyou Wang, who offered support in making the electronic instrumentation components of the sensor. This research was supported by an Australian Research Council Future Fellowships grant (FT130100858).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Chen, W., Wen, H., Khamis, H., Redmond, S.J. (2016). An Eight-Legged Tactile Sensor to Estimate Coefficient of Static Friction: Improvements in Design and Evaluation. In: Bello, F., Kajimoto, H., Visell, Y. (eds) Haptics: Perception, Devices, Control, and Applications. EuroHaptics 2016. Lecture Notes in Computer Science(), vol 9774. Springer, Cham. https://doi.org/10.1007/978-3-319-42321-0_46
Download citation
DOI: https://doi.org/10.1007/978-3-319-42321-0_46
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-42320-3
Online ISBN: 978-3-319-42321-0
eBook Packages: Computer ScienceComputer Science (R0)