Abstract
Wireless Sensor Networks (WSNs) have found numerous applications in control and monitoring fields. Advancements in the field of electronics have made wireless sensors economical enough to be widely used. WSNs have found wide applications in defence, agriculture, seismic monitoring, health sector, urban area monitoring, etc. The battery life of nodes in such networks is a constraint. Routing algorithms chosen for WSNs should make sure that energy consumption of nodes is minimized. Geographic routing is one of the options. It can be used in large scale networks owing to its low energy consumption properties. It also gives low overhead. Geographic routing comes with an inherent defect of location errors. Location errors impair the performance of geographic routing. In this paper a protocol Enhanced Energy Conditioned Mean Square Error Algorithm (E-ECMSE) is proposed that copes with the location errors of geographic routing and hence shows a fair increase in the packet delivery ratio of the network and a decrease in the energy consumption. The number of hops in the network are controlled which directly reduce the energy consumption.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Maghsoudlou, A., St-Hilaire, M., & Kunz, T. (2011). “A survey on geographic routing protocols
for mobile ad hoc networks”. Systems and Computer Engineering, Technical Report SCE-11-03.Carleton University.2011.49 p.
Ruhrup, S. (2009). “Theory and practice of geographic routing”. Ad Hoc and Sensor Wireless Networks: Architectures, Algorithms and Protocols, 69.
Seada, K., Helmy, A., & Govindan, R. (2004, April). “On the effect of localization errors on geographic face routing in sensor networks”. In Proceedings of the 3rd international symposium on Information processing in sensor networks (pp. 71-80). ACM.
Shah, R. C., Wolisz, A., & Rabaey, J. M. (2005, May). “On the performance of geographical routing in the presence of localization errors [ad hoc network applications]”. In IEEE International Conference on Communications, 2005. ICC 2005. 2005 (Vol. 5, pp. 2979-2985). IEEE.
Takagi, H., & Kleinrock, L. (1984). “Optimal transmission ranges for randomly distributed packet radio terminals. IEEE Transactions on communications ”, 32(3), 246-257.
Peng, B., & Kemp, A. H. (2011). “Energy-efficient geographic routing in the presence of localization errors”. Computer Networks, 55(3), 856-872.
Popescu, A. M., Salman, N., &Kemp, A. H. (2014). “Energy efficient geographic routing robust against location errors”. IEEE Sensors Journal, 14(6), 1944-1951.
Kim, Y., Lee, J. J., & Helmy, A. (2004). “Modeling and analyzing the impact of location inconsistencies on geographic routing in wireless networks”. ACM SIGMOBILE Mobile Computing and Communications Review, 8(1), 48-60
Yu, Y., Govindan, R., & Estrin, D. (2001). “Geographical and energy aware routing: A recursive data dissemination protocol for wireless sensor networks”.
Zeng, K., Ren, K., Lou, W., & Moran, P. J. (2009). “Energy aware efficient geographic routing in lossy wireless sensor networks with environmental energy supply”. Wireless Networks, 15(1), 39-51.
Sanchez, J. A., Ruiz, P. M., Liu, J., & Stojmenovic, I. (2007). “Bandwidth-efficient geographic multicast routing protocol for wireless sensor networks”. IEEE Sensors Journal, 7(5), 627-636.
Zhang, H., & Shen, H. (2010). “Energy-efficient beaconless geographic routing in wireless sensor networks”. IEEE transactions on parallel and distributed systems, 21(6), 881-896.
Akbar, M., Javaid, N., Khan, Z. A., Qasim, U., Alghamdi, T. A., Mohammad, S. N., … & Bouk, S. H. (2015). “Towards network lifetime maximization: sink mobility aware multihop scalable hybrid energy efficient protocols for Terrestrial WSNs”. International Journal of Distributed Sensor Networks, 2015, 10.
Latif, K., Javaid, N., Saqib, M. N., Khan, Z. A., Qasim, U., Mahmood, B., & Ilahi, M. (2015). “Energy hole minimization with field division for energy efficient routing in WSNs”. International Journal of Distributed Sensor Networks, 2015, 12.
Latif, K., Javaid, N., Saqib, M. N., Khan, Z. A., & Alrajeh, N. (2016). “Energy consumption model for density controlled divide-and-rule scheme for energy efficient routing in wireless sensor networks”. International Journal of Ad Hoc and Ubiquitous Computing, 21(2), 130-139
Popescu, A. M., Salman, N., & Kemp, A. H. (2013). “Geographic routing resilient to location errors”. IEEE Wireless Communications Letters, 2(2), 203-206.
Kadi, M., & Alkhayat, I. (2015). “The effect of location errors on location based routing protocols in wireless sensor networks”. Egyptian Informatics Journal, 16(1), 113-119.
Melodia, T., Pompili, D., & Akyildiz, I. F. (2004, March). “Optimal local topology knowledge for energy efficient geographical routing in sensor networks”. In INFOCOM 2004. Twentythird AnnualJoint Conference of the IEEE Computer and Communications Societies (Vol. 3, pp. 1705-1716). IEEE.
Heinzelman,W. B., Chandrakasan, A. P., & Balakrishnan, H. (2002). “An application-specific protocol architecture for wireless microsensor networks”. IEEE Transactions on wireless communications, 1(4), 660-670.
Salman, N., Ghogho, M., & Kemp, A. H. (2014). “Optimized low complexity sensor node positioning in wireless sensor networks”. IEEE Sensors Journal, 14(1), 39-46.
Radulescu, V. (2008). “Rodrigues-type formulae for Hermite and Laguerre polynomials”. An. St. Univ. Ovidius Constanta, 16, 109-116.
Kreh, M. (2012). “Bessel functions”. Lecture Notes, Penn State-Gttingen Summer School on Number Theory, 82.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Asim, D.B., Javaid, N. (2017). Enhanced energy conditioned mean square error algorithm for wireless sensor networks. In: Barolli, L., Xhafa, F., Yim, K. (eds) Advances on Broad-Band Wireless Computing, Communication and Applications. BWCCA 2016. Lecture Notes on Data Engineering and Communications Technologies, vol 2. Springer, Cham. https://doi.org/10.1007/978-3-319-49106-6_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-49106-6_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-49105-9
Online ISBN: 978-3-319-49106-6
eBook Packages: EngineeringEngineering (R0)