Abstract
This paper describes the construction of 3D statistical deformation models (SDMs) from biomechanical simulations. The method was used to capture the average breast motion and its variability due to compressing it between two plates as performed for X-ray mammography. One SDM described the motion from the compressed to the undeformed state. Another SDM captured the deformation difference due to variations in patient positioning and compression magnitude. Such models could prove useful for guiding the development of algorithms to register serial X-ray mammograms. The SDMs are based on simulating plausible breast compressions for a population of 20 patients via finite element models created from segmented 3D MR breast images. Tissue properties and boundary conditions were varied according to reported values. Three compression configurations (called current, prior1, prior2) were simulated per breast. The associated displacement fields were mapped into a common space and SDMs were generated using principle component analysis. Leave-one-patient-out tests showed that these models can reduce the mean error of unseen deformations on average by 87% (19.35 mm to 2.49 mm for current-to-undeformed, 13.49 mm to 1.70 mm for current-to-prior) when using the first 16 modes of variation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ruiter: Registration of X-ray Mammograms and MR-Volumes of the Female Breast based on Simulated Mammographic Deformation. PhD thesis, Universität Mannheim (2003)
Rueckert, et al.: Automatic Construction of 3-D Statistical Deformation Models of the Brain using Nonrigid Registration. IEEE Trans. Med. Imag. 22, 1014–1025 (2003)
Tolli, et al.: Artificially Enlarged Training Set in Image Segmentation. In: Proc. MICCAI, p. 75. Springer, Heidelberg (2006)
Brown, et al.: Magnetic Resonance Imaging Screening in Women at Genetic Risk of Breast Cancer. Magn. Reson. Imaging 18, 765–776 (2000)
AnalyzeDirect Inc. (2007), http://www.analyzedirect.com
Schroeder, et al.: The Visualization Toolkit. Prentice Hall, New Jersey (1998)
ANSYS Inc. FE Package, Version 11.0 (2007), http://www.ansys.com
Sarvazyan, et al.: Elastic Imaging as a New Modality of Medical Imaging for Cancer Detection. In: Proc. Int. Workshop on Interaction of Ultrasound with Biological Media, pp. 69–81 (1994)
Krouskop, et al.: Elastic Moduli of Breast and Prostate Tissues Under Compression. Ultrasonic Imaging 20, 260–274 (1998)
Wellman: Tactile Imaging. PhD thesis, Harvard University (1999)
Samani, et al.: Elastic Moduli of Normal and Pathological Human Breast Tissues. Phys. Med. Biol. 52(6), 1565–1576 (2007)
Van Loocke, et al.: A Validated Model of Passive Muscle in Compression. J. Biomech. 39, 2999–3009 (2006)
Young, et al.: Radiation Doses received in the UK Breast Screening Programme in 1997 and 1998. Brit. J. Radiol. 73, 278–287 (2000)
Boone, et al.: Scatter/Primary in Mammography: Comprehensive Results. Med. Phys. 27, 2408 (2000)
Brnić,, et al.: Breast Compression and Radiation Dose in Two Different Mammographic Oblique Projections: 45 and 60o. Eur. J. Radiol. 40, 10–15 (2001)
Azar, et al.: Methods for Modeling and Predicting Mechanical Deformations of the Breast under External Pertubation. Med. Image Anal. 6, 1–27 (2002)
Samani, et al.: Biomechanical 3D Finite Element Modeling of the Human Breast Using MRI Data. IEEE Trans. Med. Imag. 20, 271–279 (2001)
Yin, et al.: ImageParser: A Tool for Finte Element Generation from Three-Dimensional Medical Images. BioMedical Engineering OnLine 3 (2004)
Pathmanathan, et al.: Predicting Tumour Location by Simulating Large Deformations of the Breast Using a 3D Finite Element Model and Nonlinear Elasticity. In: Proc. MICCAI, pp. 217–24 (2004)
Schnabel, et al.: Validation of Non-Rigid Image Registration using Finite Element Methods. IEEE Trans Med Imag 22, 238–247 (2003)
Tanner, et al.: 3D Rezoning for Finite Element Modelling of Large Breast Deformations. In: Proc. of European Modelling Symposium, pp. 51–53 (2006)
Escobar, et al.: Simultaneous Untangling and Smoothing of Tetrahedral Meshes. Comput. Meth. Appl. M 192, 2775–2787 (2003)
Tanner, et al.: Factors Influencing the Accuracy of Biomechanical Breast Models. Med. Phys. 33, 1758–1769 (2006)
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2008 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Tanner, C., Hipwell, J.H., Hawkes, D.J. (2008). Statistical Deformation Models of Breast Compressions from Biomechanical Simulations. In: Krupinski, E.A. (eds) Digital Mammography. IWDM 2008. Lecture Notes in Computer Science, vol 5116. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-70538-3_59
Download citation
DOI: https://doi.org/10.1007/978-3-540-70538-3_59
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-70537-6
Online ISBN: 978-3-540-70538-3
eBook Packages: Computer ScienceComputer Science (R0)