Abstract
The octopus provides roboticists with a good example of a completely compliant structure that can however reach good levels of stiffness and then exert forces on its environment. With no rigid structures, the octopus can deform its body and fit small apertures, its arms can bend in all directions and they can even elongate. The peculiar muscular structure of the octopus arm, named muscular hydrostat, acts in fact as a modifiable skeleton, providing stiffness when and where needed. A key point in imitating this muscular structure is that the muscular hydrostat creates a sort of antagonistic mechanism between different muscle fibres. As a consequence, the arm movements are given by a combination of contractions of part of the muscles and passive stretching of the other muscles. On one side, this reduces the contraction requirements for the single muscle; on the other side, the contractile structure must be compliant and passively stretchable. The contractile units proposed here are built with EAP (Electro-Active Polymer) technology, with a particular geometry that increases the contraction range and force, by using soft materials. Contraction tests on prototypes of the contracting units show a very good similarity with a theoretical model and support the starting hypothesis on the possibility of building a robotic octopus-like arm based on an artificial muscular hydrostat.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Bar-Cohen, Y.: Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges. SPIE Press, Bellingham (2004)
Brooks, R.A.: New Approaches to Robotics. Science 253, 1227–1232 (1991)
Chirikjian, G.S., Burdick, J.: Kinematically optimal hyper-redundant manipulator configurations. IEEE Trans. on Robotics and Automation 11, 794–806 (1995)
Hannan, M.A., Walker, I.D.: Kinematics and the implementation of an elephant’s trunk manipulator and other continuum style robots. J. of Robotic Systems 20(2), 45–63 (2003)
Hirose, S.: Biologically-Inspired Robots: snakelike locomotors and manipulators. Oxford University Press, Oxford (1993)
Ijspeert, A., Crespi, A., Ryczko, D., Cabelgruen, J.M.: From swimming to walking with a salamander robot driven by a spinal cord model. Science 315, 1416–1420 (2007)
Jones, B.A., Walker, I.D.: Kinematics for multisection continuum robots. IEEE Trans. on Robotics 22(1), 43–57 (2006)
Mazzolai, B., Laschi, C., Cianchetti, M., Patanè, F., Bassi Luciani, L., Izzo, I., Dario, P.: Biorobotic investigation on the muscle structure of an octopus tentacle. In: Conf. Proc. IEEE Eng. Med. Biol. Soc., vol. 1, pp. 1571–1574 (2007)
Laschi, C., Mazzolai, B., Mattoli, V., Cianchetti, M., Dario, P.: Design of a biomimetic robotic octopus arm. Bioinspiration & Biomimetics(submitted, 2008)
Li, C., Rahn, C.: Design of continuous backbone, cable-driven robots. ASME J. of Mechanical Design 124(2), 265–271 (2002)
Paljug, E., Ohm, T., Hayati, S.: The JPL serpentine robot: a 12-DOF system for inspection. In: Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 3143–3148 (1995)
Pelrine, R., Kornbluh, R., Pei, Q., Stanford, S., Oh, S., Eckerle, J.: Dielectric elastomer artificial muscle actuators: Toward biomimetic motion. In: SPIE Smart Structures and Materials, Electroactive Polymer Actuators and Devices, vol. 4695, pp. 126–137 (2002)
Pfeifer, R., Lungarella, M., Iida, F.: Self-Organization, Embodiment, and Biologically Inspired Robotics. Science 5853(318), 1088–1093 (2007)
Pons, J.L.: Emerging Actuator Technologies: A Micromechatronic Approach. John Wiley & Sons, Ltd., Chichester (2005)
Sanchez, C., Arribart, H., Guille, M.M.G.: Biomimetism and bioinspiration as tools for the design of innovative materials and systems. Nature Materials (4) (2005)
Simaan, N.: Snake-like units using flexible backbones and actuation redundancy for enhanced miniaturization. In: Proc. of Int. Conf. on Robotics and Automation, pp. 3012–3017 (2005)
Smith, K.K., Kier, W.M.: Trunks, tongues, and tentacles: moving with skeletons of muscle. American Scientist (77) (1989)
Sumbre, G., Gutfreund, Y., Fiorito, G., Flash, T., Hochner, B.: Control of octopus arm extension by a peripheral motor program. Science 293, 1845–1848 (2001)
Tsukagoshi, H., Kitagawa, A., Segawa, M.: Active hose: an artificial elephant’s nose with maneuverability for rescue operation. In: Proc. of Int. Conf. on Robotics and Automation, pp. 2454–2459 (2001)
Walker, I., Dawson, D., Flash, T., Grasso, F., Hanlon, R., Hochner, B., Kier, W., Pagano, C., Rahn, C., Zhang, Q.: Continuum Robot Arms Inspired by Cephalopods. In: SPIE The International Society for Optical Engineering Defense and Security Symposium, Orlando, FL (2005)
Wilson, J.F., Li, D., Chen, Z., George Jr., R.T.: Flexible robot manipulators and grippers: relatives of elephant trunks and squid tentacles. In: Dario, P., Sandini, G., Aebischer, P. (eds.) Robots and Biological Systems: Toward a New Bionics. Springer, Berlin (1993)
Yekutieli, Y., Sumbre, G., Flash, T., Hochner, B.: How to move with no rigid skeleton? The octopus has the answers. Biologist 49(6), 250–254 (2002)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Laschi, C., Mazzolai, B., Mattoli, V., Cianchetti, M., Dario, P. (2009). Design and Development of a Soft Actuator for a Robot Inspired by the Octopus Arm. In: Khatib, O., Kumar, V., Pappas, G.J. (eds) Experimental Robotics. Springer Tracts in Advanced Robotics, vol 54. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-00196-3_4
Download citation
DOI: https://doi.org/10.1007/978-3-642-00196-3_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-00195-6
Online ISBN: 978-3-642-00196-3
eBook Packages: EngineeringEngineering (R0)