Abstract
Oil well drilling is a complex process which frequently leads to operational problems. In order to deal with some of these problems, knowledge intensive case based reasoning (KiCBR) has clearly shown potential. An important problem in oil well drilling is hole cleaning, in which a high number of observed parameters and other features are involved. This paper presents how to determine the root causes of poor hole cleaning episodes by means of KiCBR. This will help the drilling crew to apply a proper remedy. The effect of general domain knowledge was demonstrated in a comparative study, in which improved results in terms of similarity assessment and explanation capability were achieved.
Chapter PDF
Similar content being viewed by others
References
Datta, B.K., Ratnayake, C., Saasen, A., Omland, T.H.: Hole Cleaning and Pressure-Loss Prediction From a Bulk Transport Perspective. Paper SPE 96315 presented at Offshore Europe, 6-9, September 2005, Aberdeen, United Kingdom (2005)
Skalle, P., Sveen, J., Aamodt, A.: Improved Efficiency of Oil Well Drilling through Case-Based Reasoning. In: Mizoguchi, R., Slaney, J.K. (eds.) PRICAI 2000. LNCS, vol. 1886. Springer, Heidelberg (2000)
Mendes, J.R.P., Morooka, C.K., Guilherme, I.R.: Case-based reasoning in offshore well design. Journal of Petroleum Science and Engineering 40, 47–60 (2003)
Popa, A., Popa, C., Malamma, M., Hicks, J.: Case-based reasoningapproach for well failluer diagnostics and planning. SPE paper 114 229, presented at the 2008 SPE Western Regiounal and Pacific Section AAPG Joint Mtg, Bakersfield, March 31- April 2 (2008)
Abdollahi, J., Carlsen, I.M., Randhol, P., Tenold, E., Haga, H.B., Jakobsen, T.: A Case-Based Approach to Understand the Complexity of Causal Connections Related to Well Integrity Problems. In: IADC/SPE 111129, Presented at the 2008 IADC/SPE Drilling Conference held in Orlando, Florida, U.S.A., March 4–6 (2008)
Yu, M., Takach, N.E., Nakamura, D.R., Shariff, M.M.: An experimental study of hole cleaning under simulated downhole conditions. In: Paper SPE 109840 presented at SPE Annual Technical Conference and Exhibition, Anaheim, California, November 11-14 (2007)
Lapierre, S., Courville, G., Song, J.: Achieving Technical Limits: Expanded Application of Real-Time Pressure-While-Drilling Data Helps Optimize ROP and Hole Cleaning in Large-Diameter, Directional Intervals. In: Paper SPE 99142-MS presented at IADC/SPE Drilling Conference, Miami, February 21-23 (2006)
Adari, R.B., Miska, S., Kuru, E., Bern, P.: Selecting Drilling Fluid Properties and Flow Rates For Effective Hole Cleaning in High-Angle and Horizontal Wells. In: Paper SPE 63050-MS presented at SPE Annual Technical Conference and Exhibition, Dallas, October 1-4 (2000)
Sanchez, R.A., Azar, J.J., Bassal, A.A., Martins, A.L.: Effect of Drillpipe Rotation on Hole Cleaning During Directional-Well Drilling. SPE Journal 4(2), 101–108 (1999)
Charlez, P.A.: Rock Mechanics: Petroleum Applications, p. 661. Editions Technip. (1997)
Peden, J.M., Ford, J.T., Oyeneyin, M.B.: Comprehensive Experimental Investigation of Drilled Cuttings Transport in Inclined Wells Including the Effects of Rotation and Eccentricity. In: Paper SPE 20925-MS presented at European Petroleum Conference, The Hague, October 21-24 (1990)
Aamodt, A., Plaza, E.: Case-Based Reasoning: Fundamental Issues, Methodological Variations, and System Approaches. Artificial Intelligence Communications 7(1), 39–59 (1994)
Sørmo, F., Aamodt, A.: Knowledge elaboration for improved CBR. In: Sixteenth International Joint Conference on Artificial Intelligence, Workshop ML-5: Automating the Construction of Case-Based Reasoners, Stockholm, pp. 39–43 (1999)
Aamodt, A.: Knowledge-Intensive Case-Based Reasoning in CREEK. In: Funk, P., González Calero, P.A. (eds.) ECCBR 2004. LNCS, vol. 3155, pp. 1–15. Springer, Heidelberg (2004)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Shokouhi, S.V., Aamodt, A., Skalle, P., Sørmo, F. (2009). Determining Root Causes of Drilling Problems by Combining Cases and General Knowledge. In: McGinty, L., Wilson, D.C. (eds) Case-Based Reasoning Research and Development. ICCBR 2009. Lecture Notes in Computer Science(), vol 5650. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-02998-1_36
Download citation
DOI: https://doi.org/10.1007/978-3-642-02998-1_36
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-02997-4
Online ISBN: 978-3-642-02998-1
eBook Packages: Computer ScienceComputer Science (R0)