Abstract
Reusing design models is an attractive approach in business process modeling as modeling efficiency and quality of design outcomes may be significantly improved. However, reusing conceptual models is not a cost-free effort, but has to be carefully designed. While factors such as psychological anchoring and task-adequacy in reuse-based modeling tasks have been investigated, information granularity as a cognitive concept has not been at the center of empirical research yet. We hypothesize that business process granularity as a factor in design tasks under reuse has a significant impact on the effectiveness of resulting business process models. We test our hypothesis in a comparative study employing high and low granularities. The reusable processes provided were taken from widely accessible reference models for the telecommunication industry (enhanced Telecom Operations Map). First experimental results show that Recall in tasks involving coarser granularity is lower than in cases of finer granularity. These findings suggest that decision makers in business process management should be considerate with regard to the implementation of reuse mechanisms of different granularities. We realize that due to our small sample size results are not statistically significant, but this preliminary run shows that it is ready for running on a larger scale.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Yao, Y.: Probabilistic approaches to rough sets. Expert Systems 20, 287–297 (2003)
Frakes, W., Kang, K.: Software reuse research: status and future. IEEE Transactions on Software Engineering 31, 529–536 (2005)
Frakes, W.B., Terry, C.: Software Reuse: Metrics and Models. ACM Comput. Surv. 28, 415–435 (1996)
Fischer, G.: Cognitive View of Reuse and Redesign. IEEE Software 4, 60–72 (1987)
Ye, Y., Fischer, G.: Supporting Reuse by Delivering Task-Relevant and Personalized Information. In: International Conference on Software Engnineering (ICSE 2002). ACM, Orlando (2002)
Purao, S., Storey, V.C., Han, T.: Improving Analysis Pattern Reuse in Conceptual Design: Augmenting Automated Processes with Supervised Learning. Information Systems Research 14, 269–290 (2003)
Szyperski, C.: Component Software: Beyond Object-Oriented Programming. Addison-Wesley, New York (1998)
vom Brocke, J., Buddendick, C.: Reusable Conceptual Models – Requirements Based on the Design Science Research Paradigm. In: Chen, H., Olfman, L., Hevner, A., Chatterjee, S. (eds.) Design Science Research in Information Systems and Technology (DESRIST 2006), Claremont, CA (2006)
Kelly, M.: Enhanced Telecom Operations Map (eTOM) - The Business Process Framework. TeleManagement Forum (2007)
Supply-Chain Council: Supply Chain Operations Reference-model Version 8.0. Supply-Chain Council, Inc. (2006)
Zimmermann, O., Gschwind, T., Küster, J.M., Leymann, F., Schuster, N.: Reusable Architectural Decision Models for Enterprise Application Development. In: Overhage, S., Szyperski, C.A., Reussner, R., Stafford, J.A. (eds.) Third International Conference on Quality of Software Architectures, Software Architectures, Components, and Applications (QoSA 2007), pp. 15–32. Springer, Medford (2007)
Buckl, S., Ernst, A.M., Lankes, J., Schneider, K., Schweda, C.M.: A Pattern based Approach for constructing Enterprise Architecture Management Information Models. Internationale Tagung Wirtschaftsinformatik. Universitätsverlag Karlsruhe, Karlsruhe (2007)
Coad, P., North, D., Mayfield, M.: Object Models: Strategies, Patterns, Applications. Prentice-Hall, Englewood Cliffs (1996)
Gamma, E., Helm, R., Johnson, R., Vlissides, J.: Design Patterns: Elements of Reusable Object-Oriented Design. Addison-Wesley, Reading (1995)
Zdun, U., Hentrich, C., Dustdar, S.: Modeling process-driven and service-oriented architectures using patterns and pattern primitives. ACM Transactions on the Web 1(3) (2007)
Sun, W., Zhang, X., Guo, C.J., Sun, P., Su, H.: Software as a Service: Configuration and Customization Perspectives. In: IEEE Congress on Services Part II. IEEE, Los Alamitos (2008)
Reijers, H.A., Mendling, J.: Modularity in process models: Review and effects. In: Dumas, M., Reichert, M., Shan, M.-C. (eds.) BPM 2008. LNCS, vol. 5240, pp. 20–35. Springer, Heidelberg (2008)
Burton-Jones, A., Meso, P.: How good are these UML diagrams? An empirical test of the Wand and Weber good decomposition model. In: 23rd International Conference on Information Systems, Barcelona, pp. 15–18 (2002)
Wand, Y., Weber, R.: A model of systems decomposition. In: Tenth International Conference on Information Systems, Boston, MA, pp. 41–51 (1989)
Zadeh, L.A.: Towards a theory of fuzzy information granulation and its centrality in human reasoning and fuzzy logic. Fuzzy Sets and Systems 19, 111–127 (1997)
Yao, Y.: A partition model of granular computing. In: Peters, J.F., Skowron, A., Grzymała-Busse, J.W., Kostek, B.z., Świniarski, R.W., Szczuka, M.S. (eds.) Transactions on Rough Sets I. LNCS, vol. 3100, pp. 232–253. Springer, Heidelberg (2004)
Shannon, C.E., Weaver, W.: The Mathematical Theory of Communication. University of Illinois Press (1963)
Parsons, J., Saunders, C.: Cognitive Heuristics in Software Engineering: Applying and Extending Anchoring and Adjustment to Artifact Reuse. IEEE Trans. Software Eng. 30, 873–888 (2004)
Object Management Group: Business Process Modeling Notation Specification, Version 1.0 (2006)
Fettke, P., Loos, P.: Classification of reference models: a methodology and its application Information Systems and E-Business Management 1, 35–53 (2003)
Latva-Koivisto, A.M.: Finding a complexity measure for business process models. Helsinki University of Technology, Helsinki (2001)
Ehrig, M., Koschmider, A., Oberweis, A.: Measuring Similarity between Semantic Business Process Models. In: Fourth Asia-Pacific Conference on Conceptual Modelling (APCCM 2007). Australian Computer Society, Inc., Ballarat (2007)
Bosak, J., McGrath, T., Holman, G.K.: Universal Business Language v2.0. OASIS (2006)
Lindland, I., Sindre, G., Sølvberg, A.: Understanding quality in conceptual modeling. IEEE Software 11, 42–49 (1994)
Moody, D.L., Sindre, G., Brasethvik, T., Sølvberg, A.: Evaluating the quality of process models: Empirical testing of a quality framework. In: Spaccapietra, S., March, S.T., Kambayashi, Y. (eds.) ER 2002. LNCS, vol. 2503, p. 380. Springer, Heidelberg (2002)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Holschke, O., Rake, J., Levina, O. (2009). Granularity as a Cognitive Factor in the Effectiveness of Business Process Model Reuse. In: Dayal, U., Eder, J., Koehler, J., Reijers, H.A. (eds) Business Process Management. BPM 2009. Lecture Notes in Computer Science, vol 5701. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-03848-8_17
Download citation
DOI: https://doi.org/10.1007/978-3-642-03848-8_17
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-03847-1
Online ISBN: 978-3-642-03848-8
eBook Packages: Computer ScienceComputer Science (R0)