Abstract
To improve the measurement precision of the shield’s pose, the factors which influence the measurement results are studied in this paper. Coordinate transformation formula is applied to calculate the shield’s pose by transforming the relative coordinate of the shield’s cutter head center in the laser target coordinate system to the world coordinate. The relative coordinate of the cutter head center is calibrated by transforming the formula inversely. The calibration error of the relative coordinate caused by the measurement error of the attitude angle is analyzed detailedly. The position measurement error of the cutter head center is deduced based on the principle of error transfer. Finally, the impact of each attitude angle’s measurement error on the cutter head center is obtained by traversal algorithm in the variation range of attitude angle. According to the different influence degree, the measurement error of each attitude angle is proportionally allocated.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bob-Chow: Shield Tunnelling Technology. China Architecture & Building Press, Beijing (2004)
Yakar, M.: Digital elevation model generation by robotic total station instrument. J. Experimental Techniques. 33(2), 52–59 (2009)
Luo, Y., Zheng, Y., Xia, Z., Shaobo, W., Zhu, W.: The kinetic property and application of the total station instrument. In: Third International Symposium on Precision Mechanical Measurements, 62803E-1-6. SPIE Optical Engineering Press, Bellingham (2006)
Aviado, C., Gill, J., Redman, K., Ohl, R.: Methods for correlating autocollimation of theodolites and coordinate metrology in spacecraft systems. In: Optomechanical Technologies for Astronomy, 62733H-1-8. SPIE Optical Engineering Press, Bellingham (2006)
Pan, M., Zhu, G.: Study of Measure Methods of the Automatic Guiding System of Shield Machine. J. Construction Technology 34(6), 34–36 (2005)
Tang, Z., Zhao, J., Peng, G.: Measurement and calculation method for real-time attitude of tunnel boring machine. J. China Civil Engineering Journal 40(11), 92–97 (2007)
Zhang, X., Zhu, L.: Optimal Selection of Attitude Control Points of Shield Machine. J. China Mechanical Engineering 20(8), 902–906 (2009)
Han, C., Zhou, B., Yuan, X., Lian, F.: Error transfer and correction between multi-target measurements in a common clutter environment. J. Zidonghua Xuebao/Acta Automatica Sinica 33(7), 77–774 (2007)
Feng, D., et al.: On the Orientation Survey of the Shield in Subway Construction. J. Geotechnical Investigation and Surveying 5, 57–61 (2003)
Zhang, H., Gu, l.: On the measurement and the method of computation of the posture parameters of shields. J. Modern Tunnelling Technology 41(2), 14–20 (2004)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Pan, M., Zhao, B., Zhu, G. (2009). Allocation of Measurement Error of Shield’s Pose. In: Xie, M., Xiong, Y., Xiong, C., Liu, H., Hu, Z. (eds) Intelligent Robotics and Applications. ICIRA 2009. Lecture Notes in Computer Science(), vol 5928. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-10817-4_28
Download citation
DOI: https://doi.org/10.1007/978-3-642-10817-4_28
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-10816-7
Online ISBN: 978-3-642-10817-4
eBook Packages: Computer ScienceComputer Science (R0)