Abstract
This paper describes an on-line fault diagnosis system which diagnoses faults in a pilot scale mixing process using on-line measurements. Fault detection and fault diagnosis is performed based on a qualitative model of the mixing process. The qualitative model provides a set of constraints for the system being diagnosed. Once it is violated, a particular fault is detected. Since most of the information used by the diagnosis system comes from on-line measurements, it is important to determine whether sensors are working normally or not before considering failures of other components. Sensor failure is mainly diagnosed from heuristic considerations, while the failures of other components are diagnosed from a procedure of hypothesis generation, qualitative simulation, and comparison. Based on a hypothesis, the behaviour of the system being diagnosed is simulated from its qualitative model and is compared with the actual measurements. Depending upon whether they conflict or not, the hypothesis is denied or retained. A new approach for reducing the ambiguity in qualitative simulation is described. Ambiguity is reduced by taking account of the information on the order of magnitude relations between different physical variables.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bobrow, D.G. (ed.), Special volume on ‘Qualitative reasoning about physical systems’, Artificial Intelligence 24(1–3) (December 1984).
Davis, R., Diagnosis via causal reasoning: paths of interaction and the locality principle, in AAAI-83, Washington D.C. (Aug. 1983), pp. 88–94.
Davis, R., Reasoning from first principles in electronic troubleshooting, in Developments in Expert Systems (ed. M.J. Coombs), Academic Press, London (1984).
de Kleer, J. and Brown, J.S., A qualitative physics based on confluences, Artificial Intelligence 24, 7–84 (December 1984).
Herbert, M.R. and Williams, G.H., An initial evaluation of the detection and diagnosis of power plant faults using a deep knowledge representation of physical behaviour, Expert Systems 4(2), 90–99 (1987).
Herbert, M.R. and Williams, G.H., An examination of qualitative plant modelling as a basis for knowledge based operator aids in nuclear power stations, in Expert Systems and Optimisation in Process Control (eds. Abe Mamdani and Janet Efstathiou), Technical Press (1986).
Jackson, P., Introduction to Expert Systems, Addison-Wesley (1986).
Johnson, L., Expert Systems Technology: A Guide, Abacus Press (1984).
Oyeleye, O. O. and Kramer, M. A., Qualitative simulation of chemical process systems: steady-state analysis, AiChE J. 34(9), 1441–1454 (1988).
Raiman, O., Order of magnitude reasoning, in AAAI-86, Philadelphia (Aug. 11–15, 1986), pp. 100–104.
Scarl, E.A., Jamieson, J.R., and Delaune, C.I., Diagnosis and sensor validation through knowledge of structure and function, in IEEE Trans. Systems. Man. Cybernet. SMC-17 (3), 360–368 (1987).
Yamada, N. and Motoda, H., A diagnosis method of dynamic system using the knowledge on system description, in IJCAI-83, Karlsruhe, West Germany (1983), pp. 225–229.
Zhang, J., Roberts, P. D., and Ellis, J.E., An application of expert systems techniques to the on-line control and fault diagnosis of a mixing process, J. Intelligent and Robotic Systems 1, 209–223 (1988).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zhang, J., Roberts, P.D. & Ellis, J.E. Fault diagnosis of a mixing process using deep qualitative knowledge representation of physical behaviour. J Intell Robot Syst 3, 103–115 (1990). https://doi.org/10.1007/BF00242159
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00242159