Abstract
Due to the advancement of technology and the reduction in chip dimensions to achieve circuits with lower energy consumption, the design of fast integrated circuits with low power consumption has become very important. Approximate computing is one of the most attractive paradigms for reducing energy dissipation. In this article, a hybrid approximate 4:2 compressor and an imprecise multiplier with high speed and low power consumption are proposed. The suggested compressor has a very simple structure while providing an acceptable quality. The innovative design approach of the suggested hybrid approximate compressor simplifies the structure of the proposed imprecise multiplier and makes an excellent trade-off between energy efficiency and quality. The proposed designs are simulated using HSPICE with 7-nm FinFET technology. The simulation results indicate the superiority of the proposed approach regarding various performance parameters compared to the state-of-the-art counterparts. The hybrid compressor improves delay, power, power-delay product (PDP), energy-delay product (EDP), and transistor count on average by 35%, 67%, 77%, 83%, and 67%, respectively, compared to the other compressors. Furthermore, these improvements are 55%, 64%, 84%, 92%, and 60%, respectively, compared to the other approximate multipliers.
Similar content being viewed by others
Availability of data and materials
The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
M. Ahmadinejad, M.H. Moaiyeri, F. Sabetzadeh, Energy and area efficient imprecise compressors for approximate multiplication at nanoscale. Int. J. Electron. Commun. 110, 152859 (2019). https://doi.org/10.1016/j.aeue.2019.152859
O. Akbari, M. Kamal, A. Afzali-Kusha, M. Pedram, Dual-quality 4:2 compressors for utilizing in dynamic accuracy configurable multipliers. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 25(4), 1352–1361 (2017). https://doi.org/10.1109/TVLSI.2016.2643003
M.S. Ansari, H. Jiang, B.F. Cockburn, J. Han, Low-power approximate multipliers using encoded partial products and approximate compressors. IEEE J. Emerg. Sel. Topics Circuits Syst. 8(3), 404–416 (2018). https://doi.org/10.1109/JETCAS.2018.2832204
A. Arasteh, M.H. Moaiyeri, M.R. Taheri, K. Navi, N. Bagherzadeh, An energy and area efficient 4:2 compressor based on FinFETs. Integration 60, 224–231 (2018). https://doi.org/10.1016/j.vlsi.2017.09.010
C.H. Chang, J. Gu, M. Zhang, Ultra low-voltage low-power CMOS 4–2 and 5–2 compressors for fast arithmetic circuits. IEEE Trans. Circuits Syst. I Regul. Pap. 51(10), 1985–1997 (2004). https://doi.org/10.1109/TCSI.2004.835683
L. Clark, V. Vashishtha, L. Shifren, A. Gujja, S. Sinha, B. Cline, C. Ramamurthy, G. Yeric, ASAP7:A7-nm finFET predictive process design kit. Microelectron. J. 53(11), 105–115 (2016). https://doi.org/10.1016/j.mejo.2016.04.006
P.J. Edavoor, S. Raveendran, A.D. Rahulkar, Approximate multiplier design using novel dual-stage 4:2 compressors. IEEE Access 8, 48337–48351 (2020). https://doi.org/10.1109/ACCESS.2020.2978773
A. Goratla, P. Deepa, Design of approximate compressors for multiplication. ACM J. Emerg. Technol. Comput. Syst. 13, 1–17 (2017). https://doi.org/10.1145/3007649
S.K. Gupta, K. Roy, Low power robust FinFET-based SRAM design in scaled technologies, in Circuit design for reliability, pp. 223–253 (2015). https://doi.org/10.1007/978-1-4614-4078-9_11
T. Gupta, J.B. Sharma, An efficient FIR filter structure based on technology-optimized multiply-adder unit targeting LUT-based FPGAs. Circuits Syst. Signal Process. 36(2), 600–639 (2017). https://doi.org/10.1007/s00034-016-0312-9
M. Ha, S. Lee, Multipliers with approximate 4–2 compressors and error recovery modules. IEEE Embed. Syst. Lett. 10(1), 6–9 (2018). https://doi.org/10.1109/LES.2017.2746084
V. Leon, G. Zervakis, S. Xydis, D. Soudris, K. Pekmestzi, Walking through the energy-error Pareto frontier of approximate multipliers. IEEE Micro 38(4), 40–49 (2018). https://doi.org/10.1109/MM.2018.043191124
J. Liang, J. Han, F. Lombardi, New metrics for the reliability of approximate and probabilistic adders. IEEE Trans. Comput. 62(9), 1760–1771 (2013). https://doi.org/10.1109/TC.2012.146
M.H. Moaiyeri, F. Sabetzadeh, S. Angizi, An efficient majority-based compressor for approximate computing in the nano era. Microsyst. Technol. 24(3), 1589–1601 (2018). https://doi.org/10.1007/s00542-017-3587-2
A. Momeni, J. Han, P. Montuschi, F. Lombardi, Design and analysis of approximate compressors for multiplication. IEEE Trans. Comput. 64(4), 984–994 (2015). https://doi.org/10.1109/TC.2014.2308214
K.M. Reddy, M.H. Vasantha, Y.B. Nithin Kumar, D. Dwivedi, Design and analysis of multiplier using approximate 4–2 compressor. AEU Int. J. Electron. Commun. 107, 89–97 (2019). https://doi.org/10.1016/j.aeue.2019.05.021
M. Rezaei Khezeli, M.H. Moaiyeri, A. Jalali, Comparative analysis of simultaneous switching noise effects in MWCNT bundle and Cu power interconnects in CNTFET-BASED TERNARY CIRCUITS. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 27(1), 37–46 (2019). https://doi.org/10.1109/TVLSI.2018.2869761
F. Sabetzadeh, M.H. Moaiyeri, M. Ahmadinejad, A majority-based imprecise multiplier for ultra-efficient approximate image multiplication. IEEE Trans. Circuits Syst. I Regul. Pap. 66(11), 4200–4208 (2019). https://doi.org/10.1109/TCSI.2019.2918241
A. Sadeghi, N. Shiri, M. Rafiee, High-efficient, ultra-low-power and high-speed 4:2 compressor with a new full adder cell for bioelectronics applications. Circuits Syst. Signal Process. (2020). https://doi.org/10.1007/s00034-020-01459-x
S. Salahuddin, H. Jiao, V. Kursun, A novel 6T SRAM cell with asymmetrically gate underlap engineered FinFETs for enhanced read data stability and write ability, in International Symposium on Quality Electronic Design (ISQED), Santa Clara, CA, pp 353–358 (2013). https://doi.org/10.1109/ISQED.2013.6523634.
S. Venkatachalam, S. Ko, Design of Power and Area Efficient Approximate Multipliers. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 25(5), 1782–1786 (2017). https://doi.org/10.1109/TVLSI.2016.2643639
Z. Wang, A.C. Bovik, H.R. Sheikh, E.P. Simoncelli, Image quality assessment: from error visibility to structural similarity. IEEE Trans. Image Process. 13(4), 600–612 (2004). https://doi.org/10.1109/TIP.2003.819861
C. Xu, Y. Zheng, D. Niu, X. Zhu, S.H. Kang, Y. Xie, Impact of write pulse and process variation on 22 nm FinFET-based STT-RAM design: a device-architecture co-optimization approach. IEEE Trans. Multi-Scale Comput. Syst. 1(4), 195–206 (2015). https://doi.org/10.1109/TMSCS.2015.2509960
Z. Yang, J. Han, F. Lombardi, Approximate compressors for error-resilient multiplier design, in IEEE international symposium on defect and fault tolerance in VLSI and nanotechnology systems (DFTS), Amherst, MA, pp. 183–186 (2015). https://doi.org/10.1109/DFT.2015.7315159.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Salmanpour, F., Moaiyeri, M.H. & Sabetzadeh, F. Ultra-Compact Imprecise 4:2 Compressor and Multiplier Circuits for Approximate Computing in Deep Nanoscale. Circuits Syst Signal Process 40, 4633–4650 (2021). https://doi.org/10.1007/s00034-021-01688-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00034-021-01688-8