Abstract
In the present paper, the ratcheting responses of functionally graded (FG) pipe by means of nonlinear kinematic hardening rules of the Ohno–Wang (O–W), McDowell, Jiang–Sehitoglu (J–S) and Chen–Jiao–Kim (C–J–K) models are investigated. The FG pipe is considered to be subjected to a broad class of non-proportional/proportional with different loading types including tension–torsion, tension/thermal–internal pressure with different loading sequences and directions. In the current constitutive models of FG pipe, not only the physical and mechanical properties are variables but also the coefficients of the kinematic hardening rules vary as a power law through thickness. An implicit integration scheme implemented within user subroutine UMAT in ABAQUS/standard is presented for the relatively complicated constitutive models. Comparing with the novel experiments and available results in the literature, the predicted results by the proposed numerical method are demonstrated to be reliable. Results reveal the significant influences of the adopted hardening rules incorporated in the constitutive model and also FG inhomogeneity constant on the multiaxial ratcheting responses of FG pipe.
Similar content being viewed by others
References
Abdel-Karim M, Ohno N (2000) Kinematic hardening model suitable for ratchetting with steady-state. Int J Plast 16(3–4):225–240
Armstrong PJ (1966) A mathematical representation of the multiaxial Bauschinger effect. CEBG report RD/B/N, 731
Chaboche J-L (1991) On some modifications of kinematic hardening to improve the description of ratchetting effects. Int J Plast 7(7):661–678
Chen X, Jiao R, Kim KS (2005) On the Ohno–Wang kinematic hardening rules for multiaxial ratcheting modeling of medium carbon steel. Int J Plast 21(1):161–184
Jiang Y, Sehitoglu H (1996) Modeling of cyclic ratchetting plasticity, part I: development of constitutive relations. J Appl Mech 63(3):720–725
McDowell D (1995) Stress state dependence of cyclic ratchetting behavior of two rail steels. Int J Plast 11(4):397–421
Ohno N, Wang J-D (1993) Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior. Int J Plast 9(3):375–390
Voyiadjis GZ, Al-Rub RKA (2003) Thermodynamic based model for the evolution equation of the backstress in cyclic plasticity. Int J Plast 19(12):2121–2147
Chen X, Shen Y, Fu S, Yu D, Zhang Z, Chen G (2018) Size effects on uniaxial tension and multiaxial ratcheting of oligo-crystalline stainless steel thin wires. Int J Fatigue 116:163–171
Hassan T, Taleb L, Krishna S (2008) Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models. Int J Plast 24(10):1863–1889
Kang G, Gao Q, Yang X (2004) Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations. Int J Non-Linear Mech 39(5):843–857
Kim KS, Jiao R, Chen X, Sakane M (2009) Ratcheting of stainless steel 304 under multiaxial nonproportional loading. J Pressure Vessel Technol 131(2):021405
Paul SK, Sivaprasad S, Dhar S, Tarafder S (2012) True stress-controlled ratcheting behavior of 304LN stainless steel. J Mater Sci 47(11):4660–4672
Taleb L, Keller C (2018) Experimental contribution for better understanding of ratcheting in 304L SS. Int J Mech Sci 146:527–535
Singh J, Patel B (2015) Ratcheting analysis of joined conical cylindrical shells. Struct Eng Mech 55(5):913–929
Hamidinejad S, Varvani-Farahani A (2015) Ratcheting assessment of steel samples under various non-proportional loading paths by means of kinematic hardening rules. Mater Des 85:367–376
Taleb L, Keller C (2017) Experimental contribution for better understanding of ratcheting in 304L SS. Int J Mech Sci 146:527–535
Hassan T, Corona E, Kyriakides S (1992) Ratcheting in cyclic plasticity, part II: multiaxial behavior. Int J Plast 8(2):117–146
Hassan T, Kyriakides S (1992) Ratcheting in cyclic plasticity, part I: uniaxial behavior. Int J Plast 8(1):91–116
Wang L, Chen G, Zhu J, Sun X, Mei Y, Ling X, Chen X (2014) Bending ratcheting behavior of pressurized straight Z2CND18. 12N stainless steel pipe. Struct Eng Mech 52:1135–1156
Houlsby G, Abadie C, Beuckelaers W, Byrne B (2017) A model for nonlinear hysteretic and ratcheting behaviour. Int J Solids Struct 120:67–80
Welling CA, Marek R, Feigenbaum HP, Dafalias YF, Plesek J, Hruby Z, Parma S (2017) Numerical convergence in simulations of multiaxial ratcheting with directional distortional hardening. Int J Solids Struct 126:105–121
Bouhamed A, Jrad H, Said LB, Wali M, Dammak F (2019) A non-associated anisotropic plasticity model with mixed isotropic–kinematic hardening for finite element simulation of incremental sheet metal forming process. Int J Adv Manuf Technol 100(1–4):929–940
Akis T (2009) Elastoplastic analysis of functionally graded spherical pressure vessels. Comput Mater Sci 46(2):545–554
Eraslan AN, Akis T (2006) Plane strain analytical solutions for a functionally graded elastic–plastic pressurized tube. Int J Press Vessels Pip 83(9):635–644
Jrad H, Mars J, Wali M, Dammak F (2018) Geometrically nonlinear analysis of elastoplastic behavior of functionally graded shells. Eng Comput 35(3):833–847
Mallek H, Jrad H, Algahtani A, Wali M, Dammak F (2019) Geometrically non-linear analysis of FG-CNTRC shell structures with surface-bonded piezoelectric layers. Comput Methods Appl Mech Eng 347:679–699
Liu T-J, Zhang C, Wang Y-S, Xing Y-M (2016) The axisymmetric stress analysis of double contact problem for functionally graded materials layer with arbitrary graded materials properties. Int J Solids Struct 96:229–239
Kar VR, Panda SK (2016) Nonlinear thermomechanical deformation behaviour of P-FGM shallow spherical shell panel. Chin J Aeronaut 29(1):173–183
Mehditabar A, Alashti RA, Pashaei M (2014) Magneto-thermo-elastic analysis of a functionally graded conical shell. Steel Compos Struct 16(1):77–96
Mehditabar A, Rahimi G, Sadrabadi SA (2017) Three-dimensional magneto-thermo-elastic analysis of functionally graded cylindrical shell. Appl Math Mech 38(4):479–494
Sahmani S, Fattahi A, Ahmed N (2019) Analytical treatment on the nonlocal strain gradient vibrational response of postbuckled functionally graded porous micro-/nanoplates reinforced with GPL. Eng Comput. https://doi.org/10.1007/s00366-019-00782-5
Qin Z, Pang X, Safaei B, Chu F (2019) Free vibration analysis of rotating functionally graded CNT reinforced composite cylindrical shells with arbitrary boundary conditions. Compos Struct 220:847–860
Safaei B, Moradi-Dastjerdi R, Qin Z, Chu F (2019) Frequency-dependent forced vibration analysis of nanocomposite sandwich plate under thermo-mechanical loads. Compos B Eng 161:44–54
Fattahi A, Safaei B (2017) Buckling analysis of CNT-reinforced beams with arbitrary boundary conditions. Microsyst Technol 23(10):5079–5091
Safaei B, Ahmed N, Fattahi A (2019) Free vibration analysis of polyethylene/CNT plates. Eur Phys J Plus 134(6):271
Nayebi A (2010) Influence of continuum damage mechanics on the Bree’s diagram of a closed end tube. Mater Des 31(1):296–305
Yu D, Chen G, Yu W, Li D, Chen X (2012) Visco-plastic constitutive modeling on Ohno-Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18 12N steel. Int J Plast 28(1):88–101
Ohno N, Wang J-D (1993) Kinematic hardening rules with critical state of dynamic recovery. II: Application to experiments of ratchetting behavior. Int J Plast 9(3):391–403
Jiang Y, Sehitoglu H (1994) Cyclic ratchetting of 1070 steel under multiaxial stress states. Int J Plast 10(5):579–608
Jiang Y, Kurath P (1996) Characteristics of the Armstrong–Frederick type plasticity models. Int J Plast 12(3):387–415
Jiang Y, Sehitoglu H (1996) Modeling of cyclic ratchetting plasticity, part II: comparison of model simulations with experiments. J Appl Mech 63(3):726–733
Jiang YSH (1996) Modeling of cyclic ratcheting plasticity, part I: development of constitutive relations. ASME J Appl Mech 63(3):720–725
Bari S, Hassan T (2002) An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Int J Plast 18(7):873–894
Bari S, Hassan T (2000) Anatomy of coupled constitutive models for ratcheting simulation. Int J Plast 16(3–4):381–409
Sadrabadi SA, Rahimi G, Citarella R, Karami JS, Sepe R, Esposito R (2017) Analytical solutions for yield onset achievement in FGM thick walled cylindrical tubes undergoing thermomechanical loads. Compos B Eng 116:211–223
Zhou D (2015) Solutions for behavior of a functionally graded thick-walled tube subjected to mechanical and thermal loads. Int J Mech Sci 98:70–79
Corona E, Hassan T, Kyriakides S (1996) On the performance of kinematic hardening rules in predicting a class of biaxial ratcheting histories. Int J Plast 12(1):117–145
Simo JC, Hughes TJ (2006) Computational inelasticity, vol 7. Springer, Berlin
Khoei A, Eghbalian M (2012) Numerical simulation of cyclic behavior of ductile metals with a coupled damage–viscoplasticity model. Comput Mater Sci 55:376–389
Kobayashi M, Ohno N (1996) Thermal ratchetting of a cylinder subjected to a moving temperature front: effects of kinematic hardening rules on the analysis. Int J Plast 12(2):255–271
Nayebi A, Sadrabadi SA (2013) FGM elastoplastic analysis under thermomechanical loading. Int J Press Vessels Pip 111:12–20
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Mehditabar, A., Rahimi, G.H. Multiaxial ratcheting evaluation of functionally graded cylindrical shell by means of Ohno–Wang’s type models. Engineering with Computers 37, 609–622 (2021). https://doi.org/10.1007/s00366-019-00845-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00366-019-00845-7