Skip to main content

Advertisement

SpringerLink
Log in

An effective damage identification procedure using model updating technique and multi-objective optimization algorithm for structures made of functionally graded materials

  • Original Article
  • Published:
Engineering with Computers Aims and scope Submit manuscript

Abstract

The application of multi-objective optimization algorithms in the field of structural damage identification has gained increasing attention in the past few years. Nevertheless, their application to the damage detection problems of composite structures is still very limited. In this regard, the article presents the first attempt to implement a multi-objective optimization framework based on multi-objective cuckoo search (MOCS) algorithm for identifying the locations and extent of multi-damages in structures made of functionally graded materials. First, we cast the structural damage identification procedure into an optimization-based FE model updating problem, where two sub-objective functions, namely, flexibility matrix change (Flex) and modal assurance criterion (MAC), are established for the multi-objective optimization purpose. Then, the MOCS as an effective optimizer is adopted to solve the multi-objective optimization, which results in a set of Pareto-optimal solutions for damage identification. Subsequently, a decision-making process is made for finding the most preferred solution in the Pareto-optimal set. Finally, numerical simulation studies on a two-span continuous FGM beam and a cantilever FGM plate are conducted to investigate the feasibility and accuracy of the proposed damage identification procedure. According to the obtained identification results, the proposed procedure can yield good predictions for the damage locations and corresponding severities in both single and multi-damage cases of the FGM structures using spatially incomplete measurement data with noise contamination. In addition, the results also show that the MOCS algorithm provides a better damage prediction than two other well-known algorithms, including Non-dominated Sorting Genetic Algorithm II (NSGA-II) and Multi-objective Grey Wolf Optimizer (MGWO).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18

Similar content being viewed by others

References

  1. Carden EP (2004) Vibration based condition monitoring: a review. Struct Heal Monit 3:355–377. https://doi.org/10.1177/1475921704047500

    Article  Google Scholar 

  2. Fan W, Qiao P (2011) Vibration-based damage identification methods: a review and comparative study. Struct Heal Monit 10:83–111. https://doi.org/10.1177/1475921710365419

    Article  Google Scholar 

  3. Kong X, Cai C, Hu J (2017) The state-of-the-art on framework of vibration-based structural damage identification for decision making. Appl Sci 7:497. https://doi.org/10.3390/app7050497

    Article  Google Scholar 

  4. Montalvao D (2006) A review of vibration-based structural health monitoring with special emphasis on composite materials. Shock Vib Dig 38:295–324. https://doi.org/10.1177/0583102406065898

    Article  Google Scholar 

  5. Gomes GF, Alí Y, Mendéz D et al (2018) The use of intelligent computational tools for damage detection and identification with an emphasis on composites: a review. Compos Struct 196:44–54. https://doi.org/10.1016/j.compstruct.2018.05.002

    Article  Google Scholar 

  6. Liu GR, Han X, Lam KY (1999) Stress waves in functionally gradient materials and its use for material characterization. Compos Part B Eng 30:383–394. https://doi.org/10.1016/S1359-8368(99)00010-4

    Article  Google Scholar 

  7. Dai KY, Liu GR, Lim KM et al (2004) A meshfree radial point interpolation method for analysis of functionally graded material (FGM) plates. Comput Mech 34:213–223. https://doi.org/10.1007/s00466-004-0566-0

    Article  MATH  Google Scholar 

  8. Phung-Van P, Nguyen-Thoi T, Tran LV, Nguyen-Xuan H (2013) A cell-based smoothed discrete shear gap method (CS-DSG3) based on the C0-type higher-order shear deformation theory for static and free vibration analyses of functionally graded plates. Comput Mater Sci 79:857–872. https://doi.org/10.1016/j.commatsci.2013.06.010

    Article  Google Scholar 

  9. Phung-Van P, Nguyen-Thoi T, Luong-Van H, Lieu-Xuan Q (2014) Geometrically nonlinear analysis of functionally graded plates using a cell-based smoothed three-node plate element (CS-MIN3) based on the C0-HSDT. Comput Methods Appl Mech Eng 270:15–36. https://doi.org/10.1016/j.cma.2013.11.019

    Article  MATH  Google Scholar 

  10. Sina SA, Navazi HM, Haddadpour H (2009) An analytical method for free vibration analysis of functionally graded beams. Mater Des 30:741–747. https://doi.org/10.1016/j.matdes.2008.05.015

    Article  Google Scholar 

  11. Mahesh V, Harursampath D (2020) Nonlinear vibration of functionally graded magneto-electro-elastic higher order plates reinforced by CNTs using FEM. Eng Comput. https://doi.org/10.1007/s00366-020-01098-5

    Article  Google Scholar 

  12. Zhao X, Lee YY, Liew KM (2009) Free vibration analysis of functionally graded plates using the element-free kp-Ritz method. J Sound Vib 319:918–939. https://doi.org/10.1016/j.jsv.2008.06.025

    Article  Google Scholar 

  13. Mahesh V, Harursampath D (2020) Nonlinear deflection analysis of CNT/magneto-electro-elastic smart shells under multi-physics loading. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2020.1805059

    Article  Google Scholar 

  14. Vinyas M (2020) On frequency response of porous functionally graded magneto-electro- elastic circular and annular plates with different electro-magnetic conditions using HSDT. Compos Struct 240:112044. https://doi.org/10.1016/j.compstruct.2020.112044

    Article  Google Scholar 

  15. Mahesh V (2021) Porosity effect on the nonlinear deflection of functionally graded magneto-electro-elastic smart shells under combined loading. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2021.1875086

    Article  Google Scholar 

  16. Mahesh V, Harursampath D (2021) Large deflection analysis of functionally graded magneto-electro-elastic porous flat panels. Eng Comput. https://doi.org/10.1007/s00366-020-01270-x

    Article  Google Scholar 

  17. Nguyen-Xuan H, Tran LV, Nguyen-Thoi T, Vu-Do HC (2011) Analysis of functionally graded plates using an edge-based smoothed finite element method. Compos Struct 93:3019–3039. https://doi.org/10.1016/j.compstruct.2011.04.028

    Article  Google Scholar 

  18. Lu ZR, Lin XX, Chen YM, Huang M (2017) Hybrid sensitivity matrix for damage identification in axially functionally graded beams. Appl Math Model 41:604–617. https://doi.org/10.1016/j.apm.2016.09.008

    Article  MathSciNet  MATH  Google Scholar 

  19. Yang D, Kang C, Hu Z et al (2019) On the study of element modal strain energy sensitivity for damage detection of functionally graded beams. Compos Struct 224:110989. https://doi.org/10.1016/j.compstruct.2019.110989

    Article  Google Scholar 

  20. Jin SS, Cho S, Jung HJ et al (2014) A new multi-objective approach to finite element model updating. J Sound Vib 333:2323–2338. https://doi.org/10.1016/j.jsv.2014.01.015

    Article  Google Scholar 

  21. Kaveh A, Dadras A (2018) Structural damage identification using an enhanced thermal exchange optimization algorithm. Eng Optim 50:430–451. https://doi.org/10.1080/0305215X.2017.1318872

    Article  MATH  Google Scholar 

  22. Alkayem NF, Cao M, Zhang Y et al (2018) Structural damage detection using finite element model updating with evolutionary algorithms: a survey. Neural Comput Appl 30:389–411. https://doi.org/10.1007/s00521-017-3284-1

    Article  Google Scholar 

  23. Du D-C, Vinh H-H, Trung V-D et al (2018) Efficiency of Jaya algorithm for solving the optimization-based structural damage identification problem based on a hybrid objective function. Eng Optim 50:1233–1251. https://doi.org/10.1080/0305215X.2017.1367392

    Article  MathSciNet  MATH  Google Scholar 

  24. Mishra M, Barman SK, Maity D, Maiti DK (2020) Performance studies of 10 metaheuristic techniques in determination of damages for large-scale spatial trusses from changes in vibration responses. J Comput Civ Eng 34:04019052. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000872

    Article  Google Scholar 

  25. Dinh-Cong D, Pham-Toan T, Nguyen-Thai D, Nguyen-Thoi T (2019) Structural damage assessment with incomplete and noisy modal data using model reduction technique and LAPO algorithm. Struct Infrastruct Eng 15:1436–1449. https://doi.org/10.1080/15732479.2019.1624785

    Article  Google Scholar 

  26. Kaveh A, Rahmani P, Dadras Eslamlou A (2021) Damage detection using a graph-based adaptive threshold for modal strain energy and improved water strider algorithm. Period Polytech Civ Eng. https://doi.org/10.3311/PPci.17903

    Article  Google Scholar 

  27. Kaveh A, Hosseini SM, Zaerreza A (2020) Boundary strategy for optimization-based structural damage detection problem using metaheuristic algorithms. Period Polytech Civ Eng 65:150–167. https://doi.org/10.3311/PPci.16924

    Article  Google Scholar 

  28. Dinh-Cong D, Pham-Duy S, Nguyen-Thoi T (2018) Damage detection of 2D frame structures using incomplete measurements by optimization procedure and model reduction. J Adv Eng Comput 2:164–173. https://doi.org/10.25073/jaec.201823.203

    Article  Google Scholar 

  29. Shabbir F, Omenzetter P (2012) Application of multi-objective optimization to structural damage estimation via model updating. In: Kundu T (ed) Health monitoring of structural and biological systems. International Society for Optics and Photonics, Washington

    Google Scholar 

  30. Wang M, Brigham JC (2014) Assessment of multi-objective optimization for nondestructive evaluation of damage in structural components. J Intell Mater Syst Struct 25:1082–1096. https://doi.org/10.1177/1045389X13494933

    Article  Google Scholar 

  31. Perera R, Fang S-E, Ruiz A (2010) Application of particle swarm optimization and genetic algorithms to multiobjective damage identification inverse problems with modelling errors. Meccanica 45:723–734. https://doi.org/10.1007/s11012-009-9264-5

    Article  MATH  Google Scholar 

  32. Cha Y-J, Buyukozturk O (2015) Structural damage detection using modal strain energy and hybrid multiobjective optimization. Comput Civ Infrastruct Eng 30:347–358. https://doi.org/10.1111/mice.12122

    Article  Google Scholar 

  33. Alkayem NF, Cao M, Ragulskis M (2018) Damage diagnosis in 3D structures using a novel hybrid multiobjective optimization and fe model updating framework. Complexity 2018:1–13. https://doi.org/10.1155/2018/3541676

    Article  Google Scholar 

  34. Araújo dos Santos JV, Madeira JFA, Lopes H, Moreno-García P (2019) Application of multiobjective optimization based on differences of modal displacements and modal rotations for damage quantification in beams. In: Ch M (ed) EngOpt 2018 proceedings of the 6th international conference on engineering optimization. Springer International Publishing, Cham, pp 1009–1019

    Chapter  Google Scholar 

  35. Yang XS, Deb S (2013) Multiobjective cuckoo search for design optimization. Comput Oper Res 40:1616–1624. https://doi.org/10.1016/j.cor.2011.09.026

    Article  MathSciNet  MATH  Google Scholar 

  36. Chen Y, Logan P, Avitabile P, Dodson J (2019) Non-model based expansion from limited points to an augmented set of points using chebyshev polynomials. Exp Tech 43:521–543. https://doi.org/10.1007/s40799-018-00300-0

    Article  Google Scholar 

  37. Tarpø M, Nabuco B, Georgakis C, Brincker R (2020) Expansion of experimental mode shape from operational modal analysis and virtual sensing for fatigue analysis using the modal expansion method. Int J Fatigue 130:105280. https://doi.org/10.1016/j.ijfatigue.2019.105280

    Article  Google Scholar 

  38. Friswell MI, Garvey SD, Penny JET (1995) Model reduction using dynamic and iterated IRS techniques. J Sound Vib 186:311–323. https://doi.org/10.1006/jsvi.1995.0451

    Article  MATH  Google Scholar 

  39. Xia Y, Lin R (2004) A new iterative order reduction (IOR) method for eigensolutions of large structures. Int J Numer Methods Eng 59:153–172. https://doi.org/10.1002/nme.876

    Article  MATH  Google Scholar 

  40. Boo S-H, Lee P-S (2017) An iterative algebraic dynamic condensation method and its performance. Comput Struct 182:419–429. https://doi.org/10.1016/j.compstruc.2016.12.011

    Article  Google Scholar 

  41. Weng S, Zhu AZ, Zhu HP et al (2014) Dynamic condensation approach to the calculation of eigensensitivity. Comput Struct 132:55–64. https://doi.org/10.1016/j.compstruc.2013.10.012

    Article  Google Scholar 

  42. Perera R, Torres R (2006) Structural damage detection via modal data with genetic algorithms. J Struct Eng 132:1491–1501. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:9(1491)

    Article  Google Scholar 

  43. Vo-Duy T, Ho-Huu V, Dang-Trung H et al (2016) Damage detection in laminated composite plates using modal strain energy and improved differential evolution algorithm. Procedia Eng 142:182–189. https://doi.org/10.1016/j.proeng.2016.02.030

    Article  Google Scholar 

  44. Tan D, Lu Z, Liu J (2018) A two-step method for damage identification in beam structures based on influence line difference and acceleration data. Adv Mech Eng 10:168781401878740. https://doi.org/10.1177/1687814018787404

    Article  Google Scholar 

  45. Zare Hosseinzadeh A, Ghodrati Amiri G, Jafarian Abyaneh M et al (2020) Baseline updating method for structural damage identification using modal residual force and grey wolf optimization. Eng Optim 52:549–566. https://doi.org/10.1080/0305215X.2019.1593400

    Article  MATH  Google Scholar 

  46. Zare Hosseinzadeh A, Bagheri A, Ghodrati Amiri G, Koo K-Y (2014) A flexibility-based method via the iterated improved reduction system and the cuckoo optimization algorithm for damage quantification with limited sensors. Smart Mater Struct 23:045019. https://doi.org/10.1088/0964-1726/23/4/045019

    Article  Google Scholar 

  47. Dinh-Cong D, Vo-Duy T, Nguyen-Thoi T (2018) Damage assessment in truss structures with limited sensors using a two-stage method and model reduction. Appl Soft Comput 66:264–277. https://doi.org/10.1016/j.asoc.2018.02.028

    Article  Google Scholar 

  48. Dinh-Cong D, Nguyen-Thoi T, Nguyen DT (2020) A FE model updating technique based on SAP2000-OAPI and enhanced SOS algorithm for damage assessment of full-scale structures. Appl Soft Comput 89:106100. https://doi.org/10.1016/j.asoc.2020.106100

    Article  Google Scholar 

  49. Huang M, Li X, Lei Y, Gu J (2020) Structural damage identification based on modal frequency strain energy assurance criterion and flexibility using enhanced Moth-Flame optimization. Structures 28:1119–1136. https://doi.org/10.1016/j.istruc.2020.08.085

    Article  Google Scholar 

  50. Dinh-Cong D, Nguyen-Thoi T, Vinyas M, Nguyen DT (2019) Two-stage structural damage assessment by combining modal kinetic energy change with symbiotic organisms search. Int J Struct Stab Dyn 19:1950120. https://doi.org/10.1142/S0219455419501207

    Article  Google Scholar 

  51. Yang X-S, Suash D (2009) Cuckoo search via Lévy flights. In: 2009 World Congress on Nature & Biologically Inspired Computing, IEEE, pp 210–214

  52. Yang XS, Deb S (2014) Cuckoo search: recent advances and applications. Neural Comput Appl 24:169–174. https://doi.org/10.1007/s00521-013-1367-1

    Article  Google Scholar 

  53. Bechikh S, Ben Said L, Ghédira K (2010) Searching for knee regions in multi-objective optimization using mobile reference points. Proc ACM Symp Appl Comput. https://doi.org/10.1145/1774088.1774325

    Article  Google Scholar 

  54. Deb K, Pratap A, Agarwal S, Meyarivan T (2002) A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput 6:182–197. https://doi.org/10.1109/4235.996017

    Article  Google Scholar 

  55. Mirjalili S, Saremi S, Mirjalili SM, Coelho LDS (2016) Multi-objective grey wolf optimizer: a novel algorithm for multi-criterion optimization. Expert Syst Appl 47:106–119. https://doi.org/10.1016/j.eswa.2015.10.039

    Article  Google Scholar 

  56. Dinh-Cong D, Truong TT, Nguyen-Thoi T (2021) A comparative study of different dynamic condensation techniques applied to multi-damage identification of FGM and FG-CNTRC plates. Eng Comput. https://doi.org/10.1007/s00366-021-01312-y

    Article  Google Scholar 

Download references

Acknowledgements

This research is funded by Vietnam National Foundation for Science and Technology Development (NAFOSTED) under grant number 107.02-2019.330.

Author information

Authors and Affiliations

  1. Division of Construction Computation, Institute for Computational Science, Ton Duc Thang University, Ho Chi Minh City, Vietnam

    D. Dinh-Cong

  2. Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University, Ho Chi Minh City, Vietnam

    T. Nguyen-Thoi

  3. Faculty of Civil Engineering Ton Duc Thang University, Ho Chi Minh City, Vietnam

    D. Dinh-Cong & T. Nguyen-Thoi

Authors
  1. D. Dinh-Cong
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. T. Nguyen-Thoi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to T. Nguyen-Thoi.

Ethics declarations

Conflict of interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dinh-Cong, D., Nguyen-Thoi, T. An effective damage identification procedure using model updating technique and multi-objective optimization algorithm for structures made of functionally graded materials. Engineering with Computers 39, 1229–1247 (2023). https://doi.org/10.1007/s00366-021-01511-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00366-021-01511-7

Keywords

Search

Navigation