Abstract
There are many circumstances where shallow footings are constructed near sloping ground. When a footing is placed near the crest of sloping surface, the bearing capacity of the soil and the stability of the slope have been decreased remarkably based on the position of the footing with reference to the slope and slope inclination. In this regard, a sequence of finite element analysis has been carried out using Plaxis 2D v2015.02 to investigate the ultimate bearing capacity of strip footings located near c–φ soil slope. The influence of different geo-parameters on the load carrying capacity of the footing has been investigated, and the outcomes are appropriately explained. Moreover, large database of numerically simulated ultimate bearing capacity has been considered for developing and verifying the ANN model to establish a predictive model equation and the relative importance of the input parameters. It has been professed that angle of internal friction is the most important input parameter for estimating the bearing capacity of strip footing located on crest of c–φ slope.
Similar content being viewed by others
References
Terzaghi K (1943) Theoretical soil mechanics. Wiley, New York
Meyerhof GG (1951) The ultimate bearing capacity of foundations. Geotechnique 2:301–332
Skempton AW (1951) The bearing capacity of clay. In: Building research congress
Hansen JB (1970) A revised and extended formula for bearing capacity. Dan Geotech Inst Bull 28:5–11
Vesic AS (1973) Analysis of ultimate loads of shallow foundation. J Soil Mech Found Div ASCE 99(SM1):45–73
Shields DH, Scott JD, Bauer GE, Deschenes JH, Barsvary AK (1977) Bearing capacity of foundation near slopes. In: Proceedings of the 10th international conference on soil mechanics and foundation engineering Japanese Society of Soil Mechanics and Foundation Engineering, Tokyo, Japan, vol 2, pp 715–720
Bauer GE, Shields DH, Scott JD, Gruspier JE (1981) Bearing capacity of footing in granular slope. In: Proceedings of 11th international conference on soil mechanics and foundation engineering, Balkema, Rotterdam, vol 2, pp 33–36
Kumar SVA, Ilamparuthi K (2009) Response of footing on sand slopes. In: Indian geotechnical conference, Guntur, pp 622–626
Castelli F, Lentini V (2012) Evaluation of the bearing capacity of footings on slopes. Int J Phys Model Geotech 12(3):112–118
Keskin MS, Laman M (2013) Model studies of bearing capacity of strip footing on sand slope. KSCE J Civ Eng 17(4):699–711
Azzam WR, El-Wakil AZ (2015) Experimental and numerical studies of circular footing resting on confined granular subgrade adjacent to slope. Int J Geomech 16(1):1–15
Shukla RP, Jakka RS (2016) Discussion on experimental and numerical studies of circular footing resting on confined granular subgrade adjacent to slope by WR Azzam and AZ El-Wakil. Int J Geomech 17(2):1–3
Acharyya R, Dey A (2017) Finite element investigation of the bearing capacity of square footings resting on sloping ground. INAE Lett 2(3):97–105
Leshchinsky B (2005) Bearing capacity of footings placed adjacent to c′–φ′ slopes. J Geotech Geoenviron Eng 141(6):1–13
Acharyya R, Dey A, Kumar B (2018) Finite element and ANN-based prediction of bearing capacity of square footing resting on the crest of c–φ soil slope. Int J Geotech Eng. https://doi.org/10.1080/19386362.2018.1435022
Azzam WR, Farouk A (2010) Experimental and numerical studies of sand slopes loaded with skirted strip footing. Electron J Geotech Eng 15:795–812
Elsaied AE (2014) Performance of footing with single side micro-piles adjacent to slopes. Alex Eng J 53(4):903–910
Clark JI, McKeown S, Crawford CB (1988) Field measurements of the behavior of inclined footings on a natural slope. Can Geotech J 25:662–674
Lee MI, Lee HJ (1996) Prediction of pile bearing capacity using neural networks. Comput Geotech 18(3):189–200
Das SK, Basudhar PK (2006) Undrained lateral load capacity of piles in clay using artificial neural network. Comput Geotech 33:454–459
Momeni E, Nazir R, Armaghani DJ, Maizir H (2014) Prediction of pile bearing capacity using a hybrid genetic algorithm-based ANN. Measurement 57:122–131
Ghaboussi J, Sidarta DE, Lade PV (1994) Neural network based modelling in geomechanics. In: Computer methods and advances in geomechanics. Rotterdam Publishing, Balkema, pp 153–164
Shahin MA, Maier HR, Jaksa MB (2002) Predicting settlement of shallow foundations using neural networks. J Geotech Geoenviron Eng 128(9):785–793
Goh ATC (1994) Seismic liquefaction potential assessed by neural networks. J Geotech Geoenviron Eng 120(9):1467–1480
Erzin Y, Gumaste SD, Gupta AK, Singh DN (2009) Artificial neural network (ANN) models for determining hydraulic conductivity of compacted fine-grained soils. Can Geotech J 46:955–968
Das SK, Samui P, Sabat AK, Sitharam TG (2010) Prediction of swelling pressure of soil using artificial intelligence technique. Environ Earth Sci 61:393–403
Das SK, Samui P, Sabat AK (2012) Prediction of field hydraulic conductivity of clay liners using an artificial neural network and support vector machine. Int J Geomech 12:606–611
Mishra AK, Kumar B, Dutta J (2016) Prediction of hydraulic conductivity of soil bentonite mixture using hybrid-ANN approach. J Environ Inf 27(2):98–105
Noorzaei J, Hakim SJS, Jaafar MS (2008) An approach to predict ultimate bearing capacity of surface footings using artificial neural network. Indian Geotech J 38(4):513–526
Kuo YL, Jaksa MB, Lyamin AV, Kaggwa WS (2009) ANN-based model for predicting the bearing capacity of strip footing on multi-layered cohesive soil. Comput Geotech 36:503–516
Behera RN, Patra CR, Sivakugan N, Das BM (2013) Prediction of ultimate bearing capacity of eccentrically inclined loaded strip footing by ANN. Part I. Int J Geotech Eng 7(1):36–44
Behera RN, Patra CR, Sivakugan N, Das BM (2013) Prediction of ultimate bearing capacity of eccentrically inclined loaded strip footing by ANN. Part II. Int J Geotech Eng 7(2):165–172
Drescher A, Detournay E (1993) Limit load in translational failure mechanisms for associative and non-associative materials. Geotechnique 43(3):443–456
Xiao-Li Y, Nai-Zheng G, Lian-Heng Z, Jin-Feng Z (2007) Influences of non-associated flow rules on seismic bearing capacity factors of strip footing on soil slope by energy dissipation method. J Cent South Univ Technol 6:842–846
Nasr AM (2014) Behaviour of strip footing on fiber-reinforced cemented sand adjacent to sheet pile wall. Geotext Geomembr 42:599–610
MathWorks (2001) Matlab user’s manual. Version 2015A. The MathWorks, Inc., Natick
Demuth HB, Hagan MT (1996) Neural network design. PWS Publishing Company, Boston
Viji VK, Lissy KF, Sobha C, Benny MA (2013) Predictions on compaction characteristics of fly ashes using regression analysis and artificial neural network analysis. Int J Geotech Eng 7(3):282–291
Garson GD (1991) Interpreting neural-network connection weights. Artif Intell Expert 6(7):47–51
Das SK, Basudhar PK (2008) Prediction of residual friction angle of clay using artificial neural network. Eng Geol 100:142–145
Das SK, Samui P, Sabat AK (2011) Application of artificial intelligence to maximum dry density and unconfined compressive strength of cement stabilized soil. Geotech Geol Eng 29:329–342
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Acharyya, R., Dey, A. Assessment of bearing capacity for strip footing located near sloping surface considering ANN model. Neural Comput & Applic 31, 8087–8100 (2019). https://doi.org/10.1007/s00521-018-3661-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00521-018-3661-4