Abstract
Mahalanobis–Taguchi system (MTS) is a kind of big data classification and reduction method which can be used in the fault diagnosis and maintenance modeling. Especially in the context of big data, it can get better results in application. And MTS uses Mahalanobis distance (MD) as the measurement scale to identify the system state with multidimensional characteristics. But when the benchmark and abnormal space which are constructed by the traditional MTS have a serious overlap, the model will perform imbalanced classification ability to identify the sample. In this paper, against the problem, a modified MTS amended by Fischer linear discriminant analysis (FLDA) is proposed, and to be used to recognize the running state of equipment. Firstly, the paper discussed the limitation to using MD as the measurement scale in the traditional model, and then to use the balance accuracy while balanced classification as the evaluation index for the balance ability of the model classification. And then the threshold optimization model was discussed with different weight coefficient considering the actual cost and loss of the missed-alarm and the false-alarm. Furthermore, FLDA was used to calculate the projection matrix and the best projection vector was selected to amend the tradition measurement scale. Finally, the modified model amended by FLDA was compared with the traditional MTS and FLDA model form two aspects of accuracy index and the size of abnormal samples by using the bearing running data. The result proved the effectiveness and superiority of the modified model.
Similar content being viewed by others
References
Abu, M. Y., Norizan, N. S., & Rahman, M. S. A. (2018). Integration of Mahalanobis–Taguchi system and traditional cost accounting for remanufacturing crankshaft. IOP Conference Series Materials Science and Engineering, 342(1), 012005.
Akter, S., & Wamba, S. F. (2017). Big data and disaster management: A systematic review and agenda for future research. Annals of Operations Research. https://doi.org/10.1007/s10479-017-2584-2.
Bougnol, M. L., & Dulá, J. H. (2006). Validating dea as a ranking tool: An application of DEA to assess performance in higher education. Annals of Operations Research, 145(1), 339–365.
Chang, Z. P., Cheng, L. S., & Liu, J. S. (2016). Multi-attribute decision making method based on Mahalanobis–Taguchi system and 2-additive choquet integral. Journal of Industrial Engineering & Engineering Management, 30(1), 133–139.
Chen, J., Cheng, L., Hu, S., & Yu, H. (2017). Fault diagnosis of rolling bearings using modified Mahalanobis–Taguchi system based on emd. Zhendong Yu Chongji/journal of Vibration & Shock, 36(5), 151–156.
Chen, J., Cheng, L., Yu, H., & Hu, S. (2018). Rolling bearing fault diagnosis and health assessment using EEMD and the adjustment Mahalanobis–Taguchi system. International Journal of Systems Science, 49(1), 147–159.
Cudney, E. A., Paryani, K., & Ragsdell, K. M. (2006). Applying the Mahalanobis–Taguchi system to vehicle ride. Concurrent Engineering: Research and Applications, 1(3), 251–259.
Cudney, E. A., Paryani, K., & Ragsdell, K. M. (2008). Identifying useful variables for vehicle braking using the adjoint matrix approach to the Mahalanobis–Taguchi system. International Journal of Industrial and Systems Engineering, 1(4), 281–292.
Elbanna, M. (2017). Modified Mahalanobis Taguchi system for imbalance data classification. Computational Intelligence and Neuroscience, 2017(5), 1–15.
Fan, Y. J., & Chaovalitwongse, W. A. (2010). Optimizing feature selection to improve medical diagnosis. Annals of Operations Research, 174(1), 169–183.
Fisher, R. A. (2012). The use of multiple measurements in taxonomic problems. Annals of Human Genetics, 7(2), 179–188.
Iquebal, A. S., Pal, A., Ceglarek, D., & Tiwari, M. K. (2014). Enhancement of Mahalanobis–Taguchi system via rough sets based feature selection. Expert Systems with Applications, 41(17), 8003–8015.
Lee, Y. C., & Teng, H. L. (2009). Predicting the financial crisis by Mahalanobis–Taguchi system—Examples of Taiwan’s electronic sector. Expert Systems with Applications, 36(4), 7469–7478.
Li, X. Y., Huang, H. Z., & Li, Y. F. (2018a). Reliability analysis of phased mission system with non-exponential and partially repairable components. Reliability Engineering & System Safety, 175, 119–127.
Li, H., Huang, H. Z., Li, Y. F., Zhou, J., & Mi, J. (2018b). Physics of failure-based reliability prediction of turbine blades using multi-source information fusion. Applied Soft Computing, 72, 624–635.
Li, C. B., Yuan, J. H., & Gao, P. (2016). Risk decision-making based on Mahalanobis–Taguchi system and grey cumulative prospect theory for enterprise information investment. Intelligent Decision Technologies, 10(1), 49–58.
Liparas, D. (2012). Applying the Mahalanobis–Taguchi strategy for software defect diagnosis. Automated Software Engineering, 19(2), 141–165.
Liparas, D., Laskaris, N., & Angelis, L. (2013). Incorporating resting state dynamics in the analysis of encephalographic responses by means of the Mahalanobis–Taguchi strategy. Expert Systems with Applications, 40(7), 2621–2630.
Liu, P., & Yi, S. P. (2017). A study on supply chain investment decision-making and coordination in the big data environment. Annals of Operations Research. https://doi.org/10.1007/s10479-017-2424-4.
Maru, Y., Mori, H., Ogai, T., Mizukoshi, N., Takeuchi, S., Yamamoto, T., et al. (2018). Anomaly detection configured as a combination of state observer and Mahalanobis–Taguchi method for a rocket engine. Transactions of the Japan Society for Aeronautical & Spaceences Aerospace Technology Japan, 16(2), 195–201.
Mi, J., Li, Y. F., Peng, W., & Huang, H. Z. (2018). Reliability analysis of complex multi-state system with common cause failure based on evidential networks. Reliability Engineering & System Safety, 174, 71–81.
Mi, J., Li, Y. F., Yang, Y. J., Peng, W., & Huang, H. Z. (2016). Reliability assessment of complex electromechanical systems under epistemic uncertainty. Reliability Engineering and System Safety, 152, 1–15.
Mishra, D., Gunasekaran, A., Papadopoulos, T., & Childe, S. J. (2016). Big data and supply chain management: A review and bibliometric analysis. Annals of Operations Research. https://doi.org/10.1007/s10479-016-2236-y.
Nakatsugawa, M., & Ohuchi, A. (2001). A study on determination of the threshold in MTS algorithm. Transactions of the Institute of Electronics Information & Communication Engineers A, 84, 519–527.
Pal, A., & Maiti, J. (2010). Development of a hybrid methodology for dimensionality reduction in Mahalanobis–Taguchi system using Mahalanobis distance and binary particle swarm optimization. Expert Systems with Applications, 37(2), 1286–1293.
Peng, C. F., Ho, L. H., Tsai, S. B., Hsiao, Y. C., Zhai, Y., Chen, Q., et al. (2017). Applying the Mahalanobis–Taguchi system to improve tablet pc production processes. Sustainability, 9(9), 1557.
Prasad, S., Zakaria, R., & Altay, N. (2016). Big data in humanitarian supply chain networks: A resource dependence perspective. Annals of Operations Research. https://doi.org/10.1007/s10479-016-2280-7.
Qiu, Z., Zhou, B., & Yuan, J. (2017). Protein-protein interaction site predictions with minimum covariance determinant and Mahalanobis distance. Journal of Theoretical Biology, 433, 57.
Reséndiz, E., Moncayo-Martínez, L. A., & Solís, G. (2013). Binary ant colony optimization applied to variable screening in the Mahalanobis–Taguchi system. Expert Systems with Applications, 40(2), 634–637.
Reséndiz, E., & Rull-Flores, C. A. (2013). Mahalanobis–Taguchi system applied to variable selection in automotive pedals components using Gompertz binary particle swarm optimization. Expert Systems with Applications, 40(7), 2361–2365.
Soylemezoglu, A., Jagannathan, S., & Saygin, C. (2010). Mahalanobis taguchi system (MTS) as a prognostics tool for rolling element bearing failures. Journal of Manufacturing Science and Engineering, 132(5), 051014.
Su, C. T., & Hsiao, Y. H. (2007). An evaluation of the robustness of MTS for imbalanced data. IEEE Transactions on Knowledge and Data Engineering, 19(10), 1321–1332.
Su, C., & Li, T. (2002). Neural and mts algorithms for feature selection. Asian Journal on Quality, 3(3), 113–131.
Taguchi, G., & Jugulum, R. (2002). The Mahalanobis–Taguchi strategy: A pattern technology system. Hoboken: Wiley.
Wan, Z. A. W. M., Jamaludin, K. R., Yahya, Z. R., & Ramlie, F. (2017). A hybrid methodology for the Mahalanobis–Taguchi system using random binary search-based feature selection. Far East Journal of Mathematical Sciences, 101(12), 2663–2675.
Wang, H.-C., Chiu, C.-C., & Su, C.-T. (2004). Data classification using the Mahalanobis–Taguchi system. Journal of the Chinese Institute of Industrial Engineers, 21(6), 606–618.
Wang, N., Saygin, C., & Sun, S. D. (2013). Impact of mahalanobis space construction on effectiveness of Mahalanobis–Taguchi system. International Journal of Industrial and Systems Engineering, 13(2), 233–249.
Acknowledgements
The authors would like to acknowledge the support of the National Natural Science Foundation of China (Grants No. 71401016), the Fundamental Research Funds for Central Universities of Chang’an University (Grants Nos. 300102228110, 300102228402).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wang, N., Zhang, Z., Zhao, J. et al. Recognition method of equipment state with the FLDA based Mahalanobis–Taguchi system. Ann Oper Res 311, 417–435 (2022). https://doi.org/10.1007/s10479-019-03220-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10479-019-03220-3