Abstract
Aim at protecting environment, a design proposal of Wireless Sensor Network (WSN) node for remote monitoring Carbon Monoxide is presented. The monitoring node uses a low-power SOC microprocessor C8051F930 who acts as a controller, utilizes Carbon Monoxide metal oxide (MOX) semiconductor sensor whose detective principle is that MOX semiconductor has redox reactions with CO and its resistance varies with gas concentration when it is heated, perceiving local CO concentration, conditioning the collected CO signals from the sensor, converting and processing datas, etc. The datas can be transmitted to Sink by high-performance wireless radio frequency chip Si4432 which supports for communication protocol IEEE 802.15.4, and Sink uses GPRS to send them remotely to the mobile network, realizing remote monitoring CO.
Similar content being viewed by others
References
Prades, J. D., Hernandez-Ramirez, F., Fischer, T., Hoffmann, M., Muller, R., Lopez, N., Mathur, S., & Morante, J. R. (2010). Quantitative analysis of CO-humidity gas mixtures with self-heated nanowires operated in pulsed mode. Applied Physics Letters, 24(97), 243108.
Sazia, A. E., & Dutta, A. K. (2010). Ultra-high sensitivity gas sensors based on GaN HEMT structures. In 6th international conference on electrical and computer engineering (Vol. 12, pp. 18–20).
Wen, X. (2008). Research and design of distributed carbon monoxide (CO) concentration on-line detection system. In 2nd international symposium on intelligent information technology application. doi:10.1109/IITA.2008.46.
Hu, H., Wang, G., Zhang, Q., Wang, J., Fang, J., & Zhang, Y. (2009). Design wireless multi-sensor fire detection and alarm system based on ARM. In 9th international conference on electronic measurement and instruments (pp. 285–288).
Stefanovic, N., & Pavel, L. (2011). A. Lyapunov-Krasovskii stability analysis for game-theoretic based power control in optical links. Telecommunications Systems, 47(1–2), 19–33.
Ma, C., Lee Scott, B., Pickrell, G. R., & Wang, A. (2010). Porous capillary tubing waveguide for high temperature carbon monoxide detection. IEEE Photonics Technology Letters, 22(5), March 1.
Gzara, F., & Erkut, E. (2011). Telecommunications network design with multiple technologies. Telecommunication Systems, 46(2), February.
Hackner, A., Habauzit, A., Müller, G., Comini, E., Faglia, G., & Sberveglieri, G. (2009). Surface ionization gas detection on platinum and metal oxide surfaces. IEEE Sensors Journal, 9(12), December.
Bicelli, S., Depari, A., Faglia, G., Flammini, A., & Fort, A. (2009). Model and experimental characterization of the dynamic behavior of low-power carbon monoxide MOX sensors operated with pulsed temperature profiles. IEEE Transactions on Instrumentation and Measurement, 58(5), May.
Cicioni, M., Bissi, L., & Placidi, P. (2009). Interface circuit for an ultra low power gas sensor. In International instrumentation and measurement technology conference, Singapore, 5–7 May.
Bissi, L., Cicioni, M., & Placidi, P. (2011). A programmable interface circuit for an ultralow power gas sensor. IEEE Transactions on Instrumentation and Measurement, 60(1), January.
Xing, Z., Li, D., & Shan, Y. (2010). The design and implementation of a C8051F-based embedded image acquisition system. In 2nd international workshop on intelligent systems and applications (ISA) (pp. 1–3).
Jan, M. F., Habib, Q., Irfan, M., Murad, M., Yahya, K. M., & Hassan, G. M. (2010). Carbon monoxide detection and autonomous countermeasure system for a steel mill using wireless sensor and actuator network. In 6th international conference on emerging technologies (ICET) (pp. 405–409).
Kovács, Z. G., Marosy, G. E., & Horváth, G. (2010) Case study of a simple, low power WSN implementation for forest monitoring. In 12th biennial Baltic electronic conference (BEC) (pp. 161–164).
Acknowledgements
The support of the National High Technology Research and Development Program (863 Program) (2006AA10Z258) is gratefully acknowledged. The authors gratefully acknowledge the support of the National High Technology Research and Development Program (863 Program) (2006AA10Z258).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, Z., Shi, Z. & Guo, Q. Design of wireless sensor network node for carbon monoxide monitoring. Telecommun Syst 53, 47–53 (2013). https://doi.org/10.1007/s11235-013-9675-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11235-013-9675-4