Skip to main content
Log in

Rectangular Patch Antenna for Dual-Band RFID and WLAN Applications

  • Published:
Wireless Personal Communications Aims and scope Submit manuscript

Abstract

In this paper, a simple microstrip antenna for the radio frequency identification (RFID) applications and wireless local area network (WLAN) is presented. The antenna has two operating bands at 2.45 and 5.8 GHz, which are reserved for RFID applications and WLAN applications. The studied antenna design, analysis and characterization have been performed using CST electromagnetic simulation software. The antenna was analyzed with FR4 substrate. Reflection coefficient, VSWR and directivity results were simulated, presented and discussed. The designed antenna was fabricated on ArlonAD320 dielectric with relative permittivity of 3.2. SMA female connector is used for feeding with characteristic impedance of 50 Ω. The measured reflection coefficient of the proposed antenna is compared with the simulated one, good agreement is observed. The proposed antenna is simple in design and compact in size, providing broadband impedance matching, consistent omnidirectional radiation patterns and appropriate gain characteristics (>1.5 dBi) in the RFID frequencies regions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18

Similar content being viewed by others

References

  1. Jin, A., Takahashi, S., & Shimamura, K. (2004, September 26–27). A basic study on communication capability of 2.45 GHz band RFID tag and communication quality with a reader. In Proceedings of international conference on Next Era information networking, NEINE (pp. 330–335), Kochi-city, Japan.

  2. Finkenzeller, K. (2004). RFID handbook: Radio-frequency identification fundamentals and applications (2nd ed.). Hoboken: Wiley.

    Google Scholar 

  3. Yassen, M. T., Ali, J. K., Salim, A. J., Abdulkareem, S. F., Hammoodi, A. I., & Hussan, M. R. (2013). A new compact slot antenna for dual-band WLAN applications. International Journal of Science and Modern Engineering (IJISME), 1(10), 28–32.

    Google Scholar 

  4. Mahmoud, K. R. (2010). Design optimization of a BOW-TIE antenna for 2.45 GHz RFID readers using a hybrid BSO-NM algorithm. Progress in Electromagnetics Research (PIER), 100, 105–117.

    Article  Google Scholar 

  5. Sarkar, M., Hossain, M. A., Hoque, M. R. U., & Alam, M. S. (2014). A compact W-shaped 2.45 GHz RFID tag antenna design for UHF RFID applications. In 16th International Conference Computer and Information Technology (ICCIT), Khulna, Bangladesh. (pp. 34–39, doi:10.1109/ICCITechn.2014.6997331).

  6. Fan, Z., Qiao, S., Huang-Fu, J. T., & Ran, L. X. (2007). A miniaturized printed dipole antenna with V-shaped ground for 2.45 GHz RFID readers. Progress in Electromagnetics Research, 71, 149–158.

    Article  Google Scholar 

  7. Li, X., Yang, L., Gong, S.-X., Yang, Y.-J., & Liu, J.-F. (2009). A compact folded printed dipole antenna for UHF RFID reader. Progress in Electromagnetics Research Letters, 6, 47–54.

    Article  Google Scholar 

  8. Zhang, M.-T., Jiao, Y.-C., Zhang, F.-S., & Wang, W.-T. (2009). Design of antennas for RFID application, development and implementation of RFID technology. Cristina Turcu (Ed.). ISBN:978-3-902613-54-7, InTech 2009.

  9. Mahmoud, K. R. (2010). Design optimization of a bow-tie antenna for 2.45 GHz RFID readers using a hybrid BSO-NM algorithm. Progress in Electromagnetics Research, 100, 105–117.

    Article  Google Scholar 

  10. Sze, J.-Y., Hsu, C.-I. G., & Hsu, S.-C. (2007). Design of a compact dualband annular-ring slot antenna. IEEE Antennas Wireless Propagation Letters, 6, 423–426.

    Article  Google Scholar 

  11. Ren, W. (2008). Compact dual-band slot antenna for 2.4/5 GHz WLAN applications. Progress in Electromagnetics Research B (PIER B), 8, 319–327.

    Article  Google Scholar 

  12. Gai, S., Jiao, Y.-C., Yang, Y.-B., Li, C.-Y., & Gong, J.-G. (2010). Design of a novel microstrip-feed dual-band slot antenna for WLAN applications. Progress in Electromagnetics Research Letters (PIER), 13, 75–81.

    Article  Google Scholar 

  13. Ooi, P. C., & Selvan, K.-T. (2010). A dual-band circular slot antenna with an offset microstrip-feed line for PCS, UMTS, IMT-2000, ISM, BLUETOOTH, RFID and WLAN applications. Progress in Electromagnetics Research Letters (PIER), 16, 1–10.

    Article  Google Scholar 

  14. Panda, J. R., & Kshetrimayum, R. S. (2011). A printed 2.4 GHZ/5.8 GHz dual-band monopole antenna with a protruding stub in the ground plane for WLAN And RFID applications. Progress in Electromagnetics Research, 117, 425–434.

    Article  Google Scholar 

  15. Lee, C. P., & Chakrabarty, C. K. (2011). Ultra wideband microstrip diamond slotted patch antenna with enhanced bandwidth. International Journal of Communications, Network and System Sciences, 4, 468–474.

    Article  Google Scholar 

  16. Karli, R., & Ammor, H. (2014). A WIFI antenna radiation effects on human head in the ISM band. Journal of Emerging Technologies in Web Intelligence, 6(1), 45–48.

    Article  Google Scholar 

  17. Zhang, Z. (2011). Antenna design for mobile devices, Chap. 6 (pp. 189–195). Hoboken: Wiley.

    Book  Google Scholar 

  18. Naji, D. K., Kareem, A., & Mohammed, A. A. (2013). A dual-band U-slot PIFA antenna with ground slit for RFID applications. Journal of Emerging Trends in Computing and Information Sciences, 4(2), 213–220.

    Google Scholar 

Download references

Acknowledgments

The authors would like to thank Professor Adil SAADI from ENSAM school of Meknes for its beneficial and professional help in the realization of the proposed antenna.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Radouane Karli.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Karli, R., Ammor, H. Rectangular Patch Antenna for Dual-Band RFID and WLAN Applications. Wireless Pers Commun 83, 995–1007 (2015). https://doi.org/10.1007/s11277-015-2436-9

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11277-015-2436-9

Keywords

Navigation