Skip to main content
Log in

Tapered Antenna Array with Non-identical Triangular MSA Elements for FSLL Reduction

  • Published:
Wireless Personal Communications Aims and scope Submit manuscript

Abstract

Reduced interference from nearby communication systems is an essential need in all generations of wireless communication systems. In this paper, interference is reduced by reducing the first side lobe level (FSLL) by using the concept of tapering realized with non-identical triangular elements. Resonance frequency of an Equilateral triangular microstrip antenna depends on its patch height. This property has been used effectively to realize isosceles triangular microstrip antenna with equal height, thus resonating at the same frequency. The isosceles triangular elements are designed as non-identical elements, based on its area reduction and hence gain variation, with respect to three different standard amplitude distribution functions. Six such arrays have been designed with two different inset notch feed gaps. An analysis of the non-identical elements’ antenna arrays with varying inset notch feed gaps to realize tapering in the H-plane for FSLL reduction has been presented. To verify the proposed concept, one triangular patch array using eight non-identical equilateral and isosceles triangular elements designed at 6 GHz is fabricated and tested. A reasonably acceptable agreement between the simulated and measured results validates the proposed concept.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Bucci, O. M., Isernia, T., Morabito, A. F., Perna, S., & Pinchera, D. (2010). Density and element-size tapering for the design of arrays with a reduced number of control points and high efficiency. In The 4th European Conference on Antennas and Propagation EUCAP’, Barcelona, Spain (pp. 1–4).

  2. Bucci, O. M., Perna, S., & Pinchera, D. (2012). Advances in the deterministic synthesis of uniform amplitude pencil beam concentric ring arrays. IEEE Transactions on Antennas and Propagation, 60(7), 3504–3509.

    Article  Google Scholar 

  3. Angeletti, P., & Toso, G. (2014). Array antennas with jointly optimized elements positions and dimensions part i: linear arrays. IEEE Transactions on Antennas and Propagation, 62(4), 1619–1626.

    Article  MathSciNet  MATH  Google Scholar 

  4. Yuan, T., Yuan, N., & Li, L. W. (2008). A novel series-fed taper antenna array design. IEEE Antennas and Wireless Propagation Letters, 7, 362–365.

    Article  Google Scholar 

  5. Otto, S., Rennings, A., Litschke, O., & Solbach, K. (2009). A dual-frequency series-fed patch array antenna. In Antennas and propagation, 3rd European conference, 23–27 March 2009 (pp. 1171–1175).

  6. Chen, Z., & Otto, S. (2000). A taper optimization for pattern synthesis of microstrip series-fed patch array antennas. In Proceedings of the 2nd European wireless technology conference (pp. 160–163).

  7. Chong, Y. I., & Wenbin, D. O. U. (2012). Microstrip series fed antenna array for millimeter wave automotive radar applications. In Conference on microwave workshop series on millimeter wave wireless technology and applications (IMWS) (pp. 1—3).

  8. Ray, K. P., & Kumar, G. (2009). Determination of the resonant frequency of microstrip antennas. Microwave and Optical Technology Letters, 23(2), 114–117.

    Article  Google Scholar 

  9. Kumar, G., & Ray, K. P. (2003). Broadband microstrip antennas. Norwood: Artech House.

    Google Scholar 

  10. Kraus, J. D., & Marhefka, R. J. (2002). Antennas for all applications. New York: Tata McGraw Hill.

    Google Scholar 

  11. Singh, B., Sarwade, N., & Ray, K. P. (2017). Non-identical rectangular microstrip antenna arrays with corporate feed for aperture tapering. IETE Journal of research,. https://doi.org/10.1080/03772063.2017.1356754.

    Google Scholar 

  12. Singh, B., Sarwade, N., & Ray, K. P. (2016). Antenna array performance with number of elements for aperture distributions. IETE Technical Review. https://doi.org/10.1080/02564602.2016.1139476.

    Google Scholar 

  13. Zeland Software, IE3D Ver 12, Freemont, USA.

  14. Hopkins, G. D., Ratner, J., Traille, A., & Tripp, V. (2007). Aperture efficiency of amplitude weighting distributions for array antennas. In IEEE IEEEAC proceedings; paper #1163.

  15. MATLAB and Communication Toolbox Release. (2015b). The MathWorks, Inc., Natick, Massachusetts, United States.

  16. Balanis, C. A. (2005). Antenna theory analysis and design (3rd ed.). New York: Wiley.

    Google Scholar 

Download references

Acknowledgements

Authors, sincerely acknowledge SAMEER (Society for Applied Microwave Electronics Engineering and research, Ministry of communications and Information Technology, Govt. of India, Mumbai Division), IITB campus and VJTI (Veermata Jijabai Technological Institute, Matunga, Mumbai, India) managements for providing facility for experimentation and encouragement.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Bharti Singh.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Singh, B., Sarwade, N., Ray, K.P. et al. Tapered Antenna Array with Non-identical Triangular MSA Elements for FSLL Reduction. Wireless Pers Commun 106, 1339–1352 (2019). https://doi.org/10.1007/s11277-019-06218-z

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11277-019-06218-z

Keywords

Navigation