Abstract
Purpose
X-ray computed tomography (CT) images in the dento-alveolar region are sometimes rendered unusable for diagnostic purposes due to the appearance of streak artifacts. The purpose of the study is to reduce streak artifacts appeared on dental and maxillofacial X-ray CT images by the application of modified iterative restoration method.
Methods
We took advantage of the aspect that adjacent CT images often depict very similar anatomical structures within the resulting collection of thin-slice images. CT images having streak artifacts were processed using the projection data of adjacent CT images. A modified iterative correction, the maximum likelihood-expectation maximization (ML-EM) reconstruction algorithm, was employed to reduce the streak artifact caused by metallic materials in the oral cavity. It approximates between the processed image and the original projection data. First, the projection data of an intact image were obtained, and then, the next image that had streak artifacts was processed. The projection data of the processed image were obtained, and the ML-EM method was applied to the next image again. Then, the successive iterative restoration was carried out.
Results
Twelve adjacent images were processed. Each iterative restoration was carried out fifty times. Streak artifacts were observed on processed images at the initial stage, but some of them either suppressed or disappeared as the iteration progressed.
Conclusions
The modified ML-EM method was effective to reduce streak artifacts in X-ray CT images in dento-alveolar region.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Miracle AC, Mukherji SK (2009) Conebeam CT of the head and neck, part 2: clinical applications. Am J Neuroradiol 30: 1285–1292
Shimamoto H, Kakimoto N, Fujino K, Hamada S, Shimosegawa E, Murakami S, Furukawa S, Hatazawa J (2009) Metallic artifacts caused by dental metal prostheses on PET images: a PET/CT phantom study using different PET/CT scanners. Ann Nucl Med 23: 443–449. doi:10.1007/s12149-009-0254-4
Imai K, Ikeda M, Enchi Y, Niimi T (2009) Quantitative assessment of image noise and streak artifact on CT image: comparison of z-axis automatic tube current modulation technique with fixed tube current technique. Comput Med Imaging Graph 33: 353–358. doi:10.1016/j.compmedimag.2009.02.003
Nahmias C, Lemmens C, Faul D, Carlson E, Long M, Blodgett T, Nuyts J, Townsend D (2008) Does reducing CT artifacts from dental implants influence the PET interpretation in PET/CT studies of oral cancer and head and neck cancer?. J Nucl Med 49: 1047–1052. doi:10.2967/jnumed.107.049858
Imai K, Ikeda M, Wada S, Enchi Y, Niimi T (2007) Analysis of streak artefacts on CT images using statistics of extremes. Br J Radiol 80: 911–918
Veldkamp WJ, Joemai RM, van der Molen AJ, Geleijns J (2010) Development and validation of segmentation and interpolation techniques in sinograms for metal artifact suppression in CT. Med Phys 37: 620–628
Prell D, Kyriakou Y, Beister M, Kalender WA (2009) A novel forward projection-based metal artifact reduction method for flat-detector computed tomography. Phys Med Biol 54: 6575–6591
Rinkel J, Dillon WP, Funk T, Gould R, Prevrhal S (2008) Computed tomographic metal artifact reduction for the detection and quantitation of small features near large metallic implants: a comparison of published methods. J Comput Assist Tomogr 32: 621–629. doi:10.1097/RCT.0b013e318149e215
Moon SG, Hong SH, Choi JY, Jun WS, Kang HG, Kim HS, Kang HS (2008) Metal artifact reduction by the alteration of technical factors in multidetector computed tomography: a 3-dimensional quantitative assessment. J Comput Assist Tomogr 32: 630–633. doi:10.1097/RCT.0b013e3181568b27
Zhang Y, Zhang L, Zhu XR, Lee AK, Chambers M, Dong L (2007) Reducing metal artifacts in cone-beam CT images by preprocessing projection data. Int J Radiat Oncol Biol Phys 67: 924–932. doi:10.1016/j.ijrobp.2006.09.045
Bal M, Spies L (2006) Metal artifact reduction in CT using tissue-class modeling and adaptive prefiltering. Med Phys 33: 2852–2859
Hwang D, Zeng GL (2006) Convergence study of an accelerated ML-EM algorithm using bigger step size. Phys Med Biol 51: 237–252
Wang G, Frei T, Vannier MW (2000) Fast iterative algorithm for metal artifact reduction in X-ray CT. Acad Radiol 7: 607–614
Morita Y (1992) A new computed tomography using imaging-plate and incomplete projection data. Oral Radiol 8: 119–126. doi:10.1007/BF02347809
Webber RL, Horton RA, Tyndall DA, Ludlow JB (1997) Tuned-aperture computed tomography (TACT). Theory and application for three-dimensional dento-alveolar imaging. Dentomaxillofac Radiol 1997(26): 53–62
Kondo A, Hayakawa Y, Dong J, Honda A (2010) Iterative correction applied to streak artifact reduction in an X-ray computed tomography image of the dento-alveolar region. Oral Radiol 26: 61–65. doi:10.1007/s11282-010-0037-6
Rashed EA, Kudo H (2009) Intensity-based Bayesian framework for image reconstruction from sparse projection data. Med Imaging Technol Jpn 27: 243–251
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dong, J., Kondo, A., Abe, K. et al. Successive iterative restoration applied to streak artifact reduction in X-ray CT image of dento-alveolar region. Int J CARS 6, 635–640 (2011). https://doi.org/10.1007/s11548-010-0544-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11548-010-0544-2