Skip to main content
SpringerLink
Log in

Generation of circuit and fluid diagrams for mechatronic systems

  • Computer Aided Engineering
  • Published:
Production Engineering Aims and scope Submit manuscript

Abstract

The development of machine tools as distinctive mechatronic systems is a highly interdisciplinary process. Especially expertise from the fields of mechanical, electric, fluidic, and software engineering is required. Since each of these areas constrains every other discipline, the design phase is typically characterized by serial consecution of mono-disciplinary engineering steps. This structure results firstly in long time spans for development, and secondly in design loops. The latter especially occurs, once potential for optimization in one stage is discovered during a succeeding part. This paper presents an approach to simultaneously develop machine tools. This is achieved by establishing a pre-design-phase required to identify the interdisciplinary key features, which then can be designed in parallel. The emphasis lies on deriving circuit and fluid diagrams from the functional description. Furthermore, two examples of industrial applications are given.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Zaeh MF, Graetz F, Rashidy H (2004) Installation planning for mechatronic produktion systems, In: Proceedings on the IEEE-Conference on Mechatronics & Robotics ´04, Aachen, Germany, Part I, pp 315–319

  2. Beckering H (2003) Desina—starker Partner für die Maschinendiagnose. In: Werkstatt und Betrieb—Industrielle Metallverarbeitung 136, vol 11, pp 84–87

  3. Forschungsvereinigung Werkzeugmaschinen und Fertigungstechnik e.V. (2005) Abschlussbericht FWF-Projekt 0823. Frankfurt

  4. Anton O, Lercher B (2001) Babylon der Fachsprachen. In: Industrielle Informationstechnik 4, vol 11/12, pp 48–50

  5. Lewek J (2005) Adaptierbares Informationssystem zur Erstellung baukastenbasierter Fertigungseinrichtungen. Dissertation at the Technische Universitaet Stuttgart. Jost Jetter, Heimsheim

  6. Jayaram M, Chen L (2003) Functional modelling of mechatronic systems. In: Proceedings on thes ASME 2003 design engineering technical conference on computers and information in engineering, Chicago, IL, USA

  7. Verein Deutscher Werkzeugmaschinenfabriken e.V. (2001) Richtlinie Funktionsbeschreibung—Technical Report of the Project Group 3. Frankfurt

  8. Graetz F (2006) Teilautomatische Generierung von Stromlauf- und Fluidplänen. Dissertation at the Technische Universitaet Muenchen. Utz, München

  9. Forschungsvereinigung Werkzeugmaschinen und Fertigungstechnik e.V. (2004) Abschlussbericht FWF-Projekt 0822. Frankfurt

  10. Zaeh MF, Graetz F, Rashidy H (2003) An approach to simultaneous development in machine tool industry. In: Proceedings on the modelling & applied simulation 2003 conference, Bergeggi, Italy, pp 128–133

  11. Bogilić M (2005) Comos ME—Softwaretool für die fakultätsübergreifende Zusammenarbeit bei der Entwicklung mechatronischer Systeme. In: iwb-Seminarberichte 78: Trends in der interdisziplinären Entwicklung von Werkzeugmaschinen. Utz, München

  12. Koller R (1994) Konstruktionslehre für den Maschinenbau. Springer, Berlin

    Google Scholar 

  13. DIN EN 60617 (1997) Parts 2 through 11: Graphische Symbole für Schaltpläne. Beuth, Berlin

  14. Zaeh MF, Graetz F, Rashidy H (2004) A platform for installation planning—a case study. In: Proceedings of CIRP Design Seminar, Cairo, Egypt

  15. Janesch M, Oder E, Wutte C (2006) Optimierungen im Engineeringsprozess—Ergebnisse eines Pilotprojektes. In: Forum Mechatronisches Design. Linz

  16. Zaeh MF, Graetz F, Wuensch G (2006) Inbetriebnahme von Maschinensteuerungen—Hardware-in-the-Loop-Simulation. In: SPS-Magazin. 13, vol 8, pp 38–39

Download references

Acknowledgments

The authors gratefully acknowledge the generous support of the Carinthian Industrial Development Association as well as of the Research Association for Machine Tools and Manufacturing Technology (FWF) of the German Machine Tool Builder’s Association (VDW) and its members. Contributions of the following companies (in alphabetical order) were extraordinarily helpful: DS Technologie Werkzeugmaschinenbau GmbH, Gebr. HELLER Maschinenfabrik GmbH, INDEX-Werke GmbH & Co. KG Hahn & Tessky, INNOTEC Austria GmbH, KAPP GmbH Werkzeugmaschinenfabrik, and TRUMPF GmbH & Co. KG

Author information

Authors and Affiliations

  1. Boltzmannstr. 15, 85748, Garching, Germany

    Michael F. Zaeh & Florian Graetz

Authors
  1. Michael F. Zaeh
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Florian Graetz
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Florian Graetz.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Zaeh, M.F., Graetz, F. Generation of circuit and fluid diagrams for mechatronic systems. Prod. Eng. Res. Devel. 1, 169–176 (2007). https://doi.org/10.1007/s11740-007-0043-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11740-007-0043-7

Keywords

Search

Navigation