Abstract
Spatial interpolation is an important facet of generating digital elevation models (DEMs). When faced with geographical big data, a DEM with high accuracy is required in many types of investigations and applications. This requirement has encouraged researchers to enhance current interpolation methods and improve DEM construction as much as possible. Currently, almost all spatial interpolation methods use given sampling points as inputs and then calculate the missing sampling points individually. All of them consider terrain similarities in local areas but fail to consider the influence of the varying tendency in the overall terrain. In this paper, we propose a new concept for spatial interpolation that also considers local terrain similarity. However, in our approach, the unknown elevation points are expressed using both sampling points and unknown neighboring elevation points. In this way, the unknown elevation points of the entire computed region are connected formulaically, which introduces the trend features of terrain changes into the DEM construction process. We select a typical experimental area and conduct a DEM experiment based on elevation data sources. The experiment reveals that compared with traditional methods, the new method constructs a more accurate DEM, with morphological characteristics that are more consistent with the real terrain surface.
Similar content being viewed by others
References
Bartier PM, Keller CP (1996) Multivariate interpolation to incorporate thematic surface data using inverse distance weighting (IDW). Comput Geosci 22:795–799. https://doi.org/10.1016/0098-3004(96)00021-0
Chen CF, Yue TX, Li YY (2012) A high speed method of SMTS. Comput Geosci 41:64–71. https://doi.org/10.1016/j.cageo.2011.08.012
Chen CF et al (2014) Smooth surface modeling of DEMs based on a regularized leastsquares method of thin plate spline. Math Geosci 46:909–929. https://doi.org/10.1007/s11004-013-9519-5
Chen CF et al (2016) A robust interpolation method for constructing digital elevation models from remote sensing data. Geomorphology 268:275–287. https://doi.org/10.1016/j.geomorph.2016.06.025
Chen CF et al (2017) Robust interpolation of DEMs from Lidar-derived elevation data. IEEE Trans Geosci Remote Sens 56(2):1059–1068. https://doi.org/10.1109/TGRS.2017.2758795
Gao J (2001) Construction of regular grid DEMs from digitized contour lines: a comparative study of three interpolators. Geogr Inf Sci 7:8–15. https://doi.org/10.1080/10824000109480551
Grafius DR, Malanson GP (2009) Precipitation and temperature estimation error at Alpine Treeline Ecotones using the mountain climate simulator model (MT-CLIM). Phys Geogr 30:285–307. https://doi.org/10.2747/0272-3646.30.4.285
Jiang L et al (2018) A modified HASM algorithm and its application in DEM construction. Earth Science Informatics. https://doi.org/10.1007/s12145-018-0341-y
Martinez C, Hancock GR, Kalma JD, Wells T, Boland L (2010) An assessment of digital elevation models and their ability to capture geomorphic and hydrologic properties at the catchment scale. Int J Remote Sens 23:6239–6257. https://doi.org/10.1080/01431160903403060
Price DT, McKenney DW, Nalder IA, Hutchinson MF, Kesteven JL (2000) A comparison of two statistical methods for spatial interpolation of Canadianmonthly mean climate data. Agric For Meteorol 101:81–94. https://doi.org/10.1016/S0168-1923(99)00169-0
Robinson GJ (2006) The accuracy of digital elevation models derived from digitized contour data. Photogramm Rec 14:805–814. https://doi.org/10.1111/j.1477-9730.1994.tb00793.x
Running SW, Gower ST (1991) Forest-bgc, a general model of forest ecosystem processes for regional applications. Ii. Dynamic carbon allocation and nitrogen budgets. Tree Physiol 9:147–160. https://doi.org/10.1093/treephys/9.1-2.147
Samanta S, Pal DK, Lohar D, Pal B (2012) Interpolation of climate variables and temperature modeling. Theor Appl Climatol 107:35–45. https://doi.org/10.1007/s00704-011-0455-3
Wang HR, Ye LT, Xu XY, Feng QL, Jiang Y, Liu Q, Tang Q (2010) Bayesian networks precipitation model based on hidden Markov analysis and its application. Sci China Technol Sci 53:539–547. https://doi.org/10.1007/s11431-010-0034-3
Yan CQ et al (2015) Speeding up the high-accuracy surface modelling method with GPU. Environ Earth Sci 74:6511–6523. https://doi.org/10.1007/s12665-015-4138-8
Yue TX, Wang SH (2010) HASM-AD algorithm based on the sequential least squares. Geo-Spat Inf Sci 13:285–293. https://doi.org/10.1007/s11806-010-0387-6
Yue TX, du ZP, Song DJ, Gong Y (2007) A new method of surface modeling and its application to DEM construction. Geomorphology 91:161–172. https://doi.org/10.1016/j.geomorph.2007.02.006
Yue TX, Chen CF, Li BL (2010) An adaptive method of high accuracy surface modeling and its application to simulating elevation surface. Trans GIS 14:615–630. https://doi.org/10.1111/j.1467-9671.2010.01213.x
Yue TX, Zhao N, Yang H, Song YJ, du ZP, Fan ZM, Song DJ (2013) The multi-grid method of high accuracy surface modelling and its validation. Trans GIS 17:943–952. https://doi.org/10.1111/tgis.12019
Yue TX, Liu Y, Zhao MW, du ZP, Zhao N (2016) A fundamental theorem of Earth’s surfacemodell-ing. Environ Earth Sci 75:751. https://doi.org/10.1007/s12665-016-5310-5
Zhao MW, Yue TX (2016) Classification of high accuracy surface modeling (HASM) methods and their recent developments. Prog Geogr 35:401–408. https://doi.org/10.18306/dlkxjz.2016.04.001
Zhao N, Yue TX, Zhao MW, du ZP, Fan ZM, Chen CF (2014) Sensitivity studies of a high accuracy surface modelling method. Sci China Earth Sci 57:2386–2396. https://doi.org/10.1007/s11430-014-4926-0
Zhao MW et al (2015) Parallel algorithm of a modified surface modeling method and its application in digital elevation model construction. Environ Earth Sci 74:6551–6561. https://doi.org/10.1007/s12665-015-4177-1
Zhao N, Yue T, Chen C, Zhao M, du Z (2018) An improved HASM method for dealing with large spatial data sets. Sci China Earth Sci 61:1078–1087. https://doi.org/10.1007/s11430-017-9205-1
Zhu H, Liu S, Jia S (2004) Problems of the spatial interpolation of physical geographical elements. Geogr Res 26:1597–1604. https://doi.org/10.1007/s00468-012-0734-3
Acknowledgements
We are thankful for all of the helpful comments provided by the reviewers. This study was supported by National Natural Science Foundation of China (Grant Nos. 41701450 & 41930102), Program of Provincial Natural Science Foundation of Anhui (Grant No. 1808085QD103), and Grant from State Key Laboratory of Resources and Environmental Information System in 2018.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhao, M. An indirect interpolation model and its application for digital elevation model generation. Earth Sci Inform 13, 1251–1264 (2020). https://doi.org/10.1007/s12145-020-00504-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12145-020-00504-2