Skip to main content
SpringerLink
Log in

Decentralized manufacturing systems review: challenges and outlook

  • Review
  • Published:
Logistics Research

Abstract

During the last three decades, the economic landscape has abandoned its local characteristics and evolved into a global and highly competitive economy. The market demands toward high product variety, the low human labor costs in specific locations, the evolution of Information and Communication Technologies, and specific social and political forces are the principal reasons toward globalization. The main trend currently outlining the development of manufacturing paradigms is the ever-increasing tendency in the direction of decentralization of manufacturing functions toward decentralized entities. This has caused a fundamental reorganization process of the manufacturing organizations in order to cope with this trend. Several critical issues rise in the control and management of such organizations. These criticalities are further compounded by the need to achieve mass customization of industrial products, as this greatly complicates the manufacturing and supply activities. Moreover, the modalities for the configuration and implementation of each of the distributed manufacturing typologies are identified. The purpose of this paper is to specify the main trends, issues, and sensitive topics that characterize the behavior and performance of these production systems. Based on this review, a discussion over existing production concepts is performed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. Abele E, Elzenheimer J, Liebeck T, Meyer T (2006) Reconfigurable manufacturing systems and formable factories—globalization and decentralization of manufacturing, 1st edn. Springer, Berlin, pp 4–5

    Google Scholar 

  2. Chryssolouris G (2005) Manufacturing systems: theory and practice, 2nd edn. Springer, New York

    Google Scholar 

  3. Lazonick W (1991) Business organisation and competitive advantage: capitalist transformations in the twentieth century. Technological enterprise in a historical perspective. Oxford University Press, Oxford, pp 119–163

    Google Scholar 

  4. Grazia D, Santangelo GD (2001) The impact of the information and communications technology revolution on the internationalisation of corporate technology. Int Bus Rev 10(6):701–726

    Article  Google Scholar 

  5. Mourtzis D, Doukas M, Michalos G, Psarommatis F (2011) A web-based platform for distributed mass product customization: conceptual design. DET 2011. In: 7th International conference on digital enterprise technology. Athens, pp 604–613

  6. Holweg M (2007) The genealogy of lean production. J Oper Manag 25(2):420–437

    Article  Google Scholar 

  7. Spring M, Dalrymple J (2000) Product customisation and manufacturing strategy. Int J Oper Prod Manag 20(4):441–467

    Article  Google Scholar 

  8. Airbus Global Market Forecast 2011–2030 (2011) http://www.airbus.com/company/market/forecast/cargo-aircraft-market-forecast/

  9. Mongobay, using EIA data (2009) http://rainforests.mongabay.com/09-carbon_emissions.htm

  10. Eurostat. High-tech statistics (2011) http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/High-tech_statistics

  11. Manufuture-EU (2011) www.manufuture.org

  12. Hu SJ, Ko J, Weyand L, El Maraghy HA, Kien TK, Koren Y, Bley H, Chryssolouris G, Nasr N, Shpitalni M (2011) Assembly system design and operations for product variety. CIRP Ann Manuf Technol 60(2):715–733

    Article  Google Scholar 

  13. Koren Y (2010) The global manufacturing evolution, 1st edn. Wiley, London

    Book  Google Scholar 

  14. Ford H (2010) My life and work—an autobiography of Henry Ford. Greenbook Publications, llc Milwaukee

  15. Pine BJ (1992) Mass customization: the new frontier in business competition. Harvard Business School Press, Boston

    Google Scholar 

  16. Thirumalai S, Sinha K (2011) Customization of the online purchase process in electronic retailing and customer satisfaction: an online field study. J Oper Manag 29(5):477–487

    Article  Google Scholar 

  17. Leitao P (2009) Agent-based distributed manufacturing control: a state-of-the-art survey. Eng Appl Artif Intell 22(7):979–991

    Article  Google Scholar 

  18. Mourtzis D, Papakostas N, Makris S, Xantakis V, Chryssolouris G (2008) Supply chain modelling and control for producing highly customized products. CIRP Ann Manuf Technol 57(1):451–454

    Article  Google Scholar 

  19. Wiendahl HP, El Maraghy HA, Nyhuis P, Zäh MF, Wiendahl HH, Duffie N, Brieke M (2007) Changeable manufacturing—classification, design and operation. CIRP Ann Manuf Technol 56(2):783–809

    Article  Google Scholar 

  20. Wiendahl HP, Lutz S (2002) Production in networks. CIRP Ann Manuf Techno 51(2):573–586

    Article  Google Scholar 

  21. Takeishi A (2001) Bridging inter and intra-firm boundaries: management of supplier involvement in automobile product development. Strateg Manag J 22(5):403–433

    Article  Google Scholar 

  22. Hilpert U (1991) Regional innovation and decentralization: high-tech industry and government policy. Routledge, London

    Google Scholar 

  23. Verma R, Pullman ME (1998) An analysis of the supplier selection process. Omega 26(6):739–750

    Article  Google Scholar 

  24. Humphreys PK, Wong YK, Chan FTS (2003) Integrating environmental criteria into the supplier selection process. J Mater Process Technol 138(1–3):349–356

    Article  Google Scholar 

  25. Shapiro JF (2001) Modelling the supply chain, 2nd edn. Duxbury Press, Pacific Grove

    Google Scholar 

  26. Frayret JM, D’Amours S, Montreuil B, Cloutier L (2001) A network approach to operate agile manufacturing systems. Int J Prod Econ 74(1–3):239–259

    Article  Google Scholar 

  27. Chase RB (1998) Production and operations management: manufacturing and services, 8th edn. McGraw-Hill, Maidenherd

    Google Scholar 

  28. Jayaram J, Das A, Nicolae M (2010) Looking beyond the obvious: unravelling the Toyota production system. Int J Prod Econ 128(1):280–291

    Article  Google Scholar 

  29. Junior ML, Filho MG (2010) Variations of the Kanban system: literature review and classification. Int J Prod Econ 125(1):13–21

    Article  Google Scholar 

  30. Mourtzis D (2011) Internet based collaboration in the manufacturing supply chain. CIRP J Manuf Sci Technol 4(3):296–304

    Article  Google Scholar 

  31. Jacobs FR, Weston FC (2007) Enterprise resource planning (ERP)—a brief history. J Oper Manag 25(2):357–363

    Article  Google Scholar 

  32. Kim H, Lu JC, Kvam PH, Tsao YC (2011) Ordering quantity decisions considering uncertainty in supply-chain logistics operations. Int J Prod Econ 134(1):16–27

    Article  Google Scholar 

  33. Wu D, Olson D (2008) Supply chain risk, simulation and vendor selection. Int J Prod Econ 114(2):646–655

    Article  Google Scholar 

  34. Yoo J, Kumara SRT (2010) Implications of k-best modular product design solutions to global manufacturing. CIRP Ann Manuf Technol 59(1):481–484

    Article  Google Scholar 

  35. Wiendahl HP, Scholtissek P (1994) Management and control of complexity in manufacturing. CIRP Ann Manuf Technol 43(2):533–540

    Article  Google Scholar 

  36. Koestler A (1967) The ghost in the machine, 1st edn. Macmillan, USA

    Google Scholar 

  37. Sihn W (2002) Fractal businesses in an e-business world. In: 8th International conference on concurrent enterprising. Rome

  38. Warnecke HJ (1993) The fractal company: a revolution in corporate culture. Springer, New York

    Book  Google Scholar 

  39. Warnecke HJ, Huser M (1995) Lean production. Int J Prod Econ 41(1–3):37–43

    Article  Google Scholar 

  40. Tharumarajah A (1996) Comparison of the bionic, fractal and holonic manufacturing system concepts. Int J Comput Integr Manuf 9(3):217–222

    Article  Google Scholar 

  41. Reichwald R, Stotko C, Piller F (2005) Distributed mini-factory networks as a form of real-time enterprise: concept, flexibility potential and case studies. Springer, Berlin, pp 403–434

    Google Scholar 

  42. Hippel R (1994) Sticky information and the locus of problem solving: implications for innovation. Manag Sci 40(4):429–439

    Article  Google Scholar 

  43. Zaeh MF, Wagner W (2005) Factory planning modules for knowledge sharing among different locations. In: IFIP international federation for information processing, vol. 160, pp 239–251

  44. Reichwald R, Piller F, Jaeger S, Zanner S (2003) The customer centric enterprise: advances in mass customization and personalization, 1st edn. Springer, Berlin, pp 51–69

    Book  Google Scholar 

  45. Automotive Supplier Park (2007) http://www.supplierpark.co.za/AboutLocation.aspx

  46. Jarillo JC (1998) On strategic networks. Strateg Manag J 9(1):31–41

    Article  Google Scholar 

  47. Blecker T, Neumann R (1999) Knowledge management and virtual organizations, 1st edn. Idea Group Publishing, Hershey

    Google Scholar 

  48. Davidow WH, Malone MS (1992) The virtual corporation: structuring and revitalizing the corporation for the 21st century, 1st edn. Harper Collins Publishers, New York

    Google Scholar 

  49. Martinez M, Fouletier P, Park K, Favrel J (2001) Virtual enterprise organisation, evolution and control. Intl J Prod Econ 74(1–3):225–238

    Article  Google Scholar 

  50. Browne J, Zhang J (1999) Extended and virtual enterprise—similarities and differences. Int J Agile Manag Syst 1(1):30–36

    Article  Google Scholar 

  51. Wang WYC, Chan HK (2010) Virtual organization for supply chain integration: two cases in the textile and fashion retailing industry. Int J Prod Econ 127(2):333–342

    Article  Google Scholar 

  52. Rezgui Y (2007) Role-based service-oriented implementation of a virtual enterprise: a case study in the construction sector. Comput Ind 58(1):74–86

    Article  Google Scholar 

  53. Saward J (2011) New owners in formula 1. http://joesaward.wordpress.com/2011/10/03/new-owners-in-formula-1/

  54. Doloreux D, Shearmur R (2009) Maritime clusters in diverse regional contexts: the case of Canada. Marine Policy 33(3):520–527

    Article  Google Scholar 

  55. Cieminski G, Carrie A (2000) Production planning and control and exchange of information in the Scottish electronics industry. In: Proceedings of IFIP WG 5.7 working conference. Tromo, pp 113–122

  56. Wildemann L (1998) Alliances and networks: the next generation. Int J Technol Manag 15(1–2):96–108

    Article  Google Scholar 

  57. Piller FT, Möslein KM (2002) From economies of scale towards economies of customer interaction: value creation in mass customization based electronic commerce. In: 15th Bled electronic commerce conference. TU München, pp 214–228

  58. Fogliatto FS, da Silveira GJC, Borenstein D (2012) The mass customization decade: an updated review of the literature. Int J Prod Econ 138(1):14–25

    Article  Google Scholar 

  59. MANUFUTURE, A Vision for 2020 (2011) http://www.fp7.org.tr/tubitak_content_files/270/ETP/ManuFuture/ManufutureVision2020.pdf

Download references

Acknowledgments

This work has been supported by the EC funded project “A Web-based Collaboration System for Mass Customization—e-CUSTOM” (260067).

Author information

Authors and Affiliations

  1. Laboratory for Manufacturing Systems and Automation (LMS), Department of Mechanical Engineering and Aeronautics, University of Patras, 265 00, Patras, Greece

    Dimitris Mourtzis & Michalis Doukas

Authors
  1. Dimitris Mourtzis
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Michalis Doukas
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Dimitris Mourtzis.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Mourtzis, D., Doukas, M. Decentralized manufacturing systems review: challenges and outlook. Logist. Res. 5, 113–121 (2012). https://doi.org/10.1007/s12159-012-0085-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12159-012-0085-x

Keywords

Search

Navigation