Abstract
Large eddy simulation was performed to visualize the three-dimensional vortical structures interacting with a turbulent premixed in a lean premixed swirl combustor with varied equivalence ratio. It was found that the fluctuation of unsteady heat release due to the deformation of flame surface was significantly decreased as the equivalence ratio increased because of the change in interaction between inner vortical structures and flames. This phenomenon was another evidence of the amplification mechanism in the combustion instabilities due to the strong flame–vortex interactions under lean premixed conditions.
Graphical Abstract
Graphical Abstract text
Similar content being viewed by others
References
Broda JC et al (1998) An experimental study of combustion dynamics of a premixed swirl injector. Proc Combust Inst 27:1849–1856
Huang Y, Yang V (2009) Dynamics and stability of lean-premixed swirl–stabilized combustion. Prog Energy Combust Sci 35:293–364
Lieuwen T et al (1998) The role of unmixedness and chemical kinetics in driving combustion instabilities in lean premixed combustors. Combust Sci Technol 135:193–211
Stone C, Menon S (2003) Open-loop control of combustion instabilities in a model gas turbine combustor. J Turbul 4:1–14
Acknowledgments
This work was supported by an Inha University Research Grant.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hwang, CH., Lee, CE. Numerical visualization of vortical structures in a lean premixed swirl combustor using LES. J Vis 13, 187–190 (2010). https://doi.org/10.1007/s12650-010-0026-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12650-010-0026-1