Abstract
Results of an experimental study of the supersonic mixing layer are reported, concerning the evolution characteristics of the vortex structures. Experiments are conducted in a supersonic mixing wind tunnel with a convective Mach number of 0.17. The superhigh frequency Nano-tracer Planar Laser Scattering (NPLS) technique is applied to visualize the flow patterns. The first time the spatial and temporal evolution characteristics of the vortex structures are captured. For the supersonic mixing layer, the initial section is dominated by translation, tension and rotation, while the rear section is dominated by mixing, blending and crushing.
Graphical abstract
References
Chen Q, Wang B (2021) The spatial growth of supersonic reacting mixing layers: Effects of combustion mode. Aerosp Sci Technol 116:106888
Honour J (2000) A high-resolution sixteen frame ultra fast digital imaging system. In: Conference on high-speed imaging and sequence analysis II
Humble RA, Peltier SJ, Bowersox RDW (2012) Visualization of the sctuctual response of a hypersonic turbulent boundary layer to convex curvature. Phys Fluids 24(106103):1–23
Jabbal M, Zhong S (2010) Particle image velocimetry measurements of the interaction of synthetic jets with a zero-pressure gradient laminar boundary layer. J Phys Fluids 22(6):063603–063619
Jiang N et al (2011) Development of high-repetition rate CH PLIF imaging in turbulent non-premixed flames. Proc Combust Inst 33:767–774
Li G et al (2019) Image processing techniques for shock wave detection and Tracking in High Speed Schlieren and Shadowgraph Systems. J Phys 1215(1):012021
Li G et al (2021) Development of unsteady background-oriented schlieren system in an indraft supersonic wind tunnel. J Phys: Confer Ser 1786(1):012052
Rao S et al (2018) Effect of shock interactions on mixing layer between co-flowing supersonic flows in a confined duct. Shock Waves 28(2):267–283
Tan J et al (2018) Detailed experimental investigations on flow behaviors and velocity field properties of a supersonic mixing layer. Acta Astronaut 144:30–38
Thurow BS, Lynch KP (2009) Development of a high-speed three-dimensional flow visualization technique. AIAA J 47(12):2857–2865
Thurow BS, Satija A (2006) Design of a MHz repetition rate pulse burst laser system at Auburn University. In: 44th AIAA aerospace sciences meeting and exhibit. AIAA, Reno, p 11
Thurow B, Jiang N, Lempert W (2013) Review of ultra-high repetition rate laser diagnostics for fluid dynamic measurements. Meas Sci Technol 24:012002
Wang DP et al (2012) Experimental investigation of supersonic flow over a hemisphere. Chin Sci Bull 57(15):1765–1771
Yang W et al (2004) Investigation of plane mixing layer using large eddy simulation. Comput Mech 34(5):423–429
Zha Z et al (2021) Effects of unsteady oblique shock wave on mixing efficiency of two-dimensional supersonic mixing layer. Acta Astronaut 178:60–71
Zhang D, Lv L, Tan J (2018) A review on enhanced mixing methods in supersonic mixing layer flows. Acta Astronaut 152:310–324
Zhao YX et al (2009) Supersonic Flow Imaging via Nanoparticles. Sci China Ser E 52(12):3640–3648
Zhao YX et al (2010) Multiresolution analysis of density fluctuation in supersonic mixing layer. Sci China 53(2):584–591
Acknowledgements
This work is funded by the National Natural Science Foundation of China through Grant No. 11902354.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Gang, Dd., Yi, Sh. & Mi, Q. MHz rate flow visualization of the evolution of supersonic compressible mixing layer. J Vis 25, 1117–1123 (2022). https://doi.org/10.1007/s12650-022-00860-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12650-022-00860-9