Abstract
To improve the comprehensive competitiveness of 3D printing technologies, off-line 3D automatic printing machine (3D-APM) method based on cloud manufacturing service mode and the 3D printing cloud service platform (3D-PCSP) was developed. The service trading locations included several DD workshops and shopping malls. After the work flows and core functions have been designed, a few orders were carried out to demonstrate cooperation in the automatic 3D-PCSP. Investigation of key issues such as transaction management logic engines, semantic intelligent search and trading synergistic logic engines was carried out to perform tracking of transaction management logic engines, semantic intelligent search and order statuses, guide trading tasks; achieve complete flow coordination management; and carry out verification applications of customization of personalized gifts (for example, hot collections such as sculptures, names and gifts) involving non-designers. Moreover, order trading and off-line 3D-APM services were merged to effectively integrate the requirements of users in specific fields with those of 3D-APM enthusiasts or makers for specific areas in this field through order transaction online to offline (O2O) services. Thus, effective management may be realized to off-line 3D-APMs.
Similar content being viewed by others
References
Anwar H, Din I, Kang P (2012) Projector calibration for 3D scanning using virtual target images. Int J Precis Eng Manuf 13(1):125–131
Chen SL, Kuo CH, Hsiao YH et al (2013) Development of cloud virtualization technology and its application in manufacturing management system—a case study. In: Technology Innovation and Industrial Management. pp 238–251
Dimou K, Kazmi M, Lindstrom M et al (2013) Method and apparatus for radio link failure recovery in a telecommunication system. WO United States Patent, 2013):1–18
Garg A, Patil S, Siauw T, Cunha et al (2013) An algorithm for computing customized 3D printed implants with curvature constrained channels for enhancing intracavitary brachytherapy radiation delivery. IEEE Int Conf Autom Sci Eng 2013:466–473
Hayashi G, Chiappetta E (2013) Analysis of the change in farmer service requirement and farmers’ collaboration foundation under the agricultural industrialization in Northwest Region—the explanation of traditional cooperation decline and cooperation difficult. J Northw A & F Univer 71(9):100–101
Huang Q (2014) 3D Printing shrinkage compensation using radial and angular layer perimeter point information, US20140107823
Huang D, Huang H (2010) Realization and research of online exam system based on S2SH framework. Int Confer Web Inform Syst Mining IEEE 2010:396–399
Huang WD, Wang YY, Xie Q et al (2007) Research on management of design k now ledge based on ontology in the integrated product development. China Mech Eng 18(21):2566–2569 (Chinese)
Im S, Lee Y, Kim J et al (2016) A solution for camera occlusion using a repaired pattern from a projector. Int J Precis Eng Manuf 17(11):1443–1450
Jiang YJ, Lu BH, Fang XW et al (2016) 3D printing-based Internet collect-manufacturing mode. Comput Integr Manuf Syst 22(6):1424–1433
Jung SL, Young JS, Min S et al (2016) Development and analysis of three-dimensional, 3D printed biomimetic ceramic. Int J Precis Eng Manuf 17(12):1711–1719
Kim J, Lim D, Yong HK et al (2011) A comparative study of the physical and mechanical properties of porous hydroxyapatite scaffolds fabricated by solid freeform fabrication and polymer replication method. Int J Precis Eng Manuf 12(4):695–701
Kim LS, Nakahashi K, Xu ZZ et al (2015) Three-dimensional building-cube method for inviscid compressible flow computations. Int J Precis Eng Manuf 16(13):2673–2681
Kim S, Lee J, Choi B (2016) 3D printed fluidic valves for remote operation via external magnetic field. Int J Precis Eng Manuf 17(7):937–942
Krebs WG (2014) System for 3D printing of personalized informational objects. United States Patent Application
Li BH, Zhang L, Chai X et al (2014) Research and applications of cloud manufacturing in China [M], Springer International Publishing, New York, pp 224–230
Liu Y, Han XZ, Yang WL (2008) AOP-based Netcom employee performance and incentive system. J Agric Univ Hebei 31(2):114–117
Lu BH (2013) Development of the additive manufacturing (3D printing) technology. Mach Build Autom 42(4):1–4
Lu Y, Chen B, Sun J et al (2016) Research on 3D reconstruction method of human-computer interaction scene based on support vector machine in cloud manufacturing environment. Multimed Tools Appl 2016:1–18
Mai J, Zhang L, Tao F et al (2016) Customized production based on distributed 3D printing services in cloud manufacturing. Int J Adv Manuf Technol 84(1):71–83
Meier H, Völker O, Funke B (2011) Industrial product-service system (IPS2) paradigm shift by mutually determined products and services. Int J Adv Manuf Technol 52(9):1175–1191
Minguella J, Villegas M, Poll B et al (2014) Automatic casting of advanced technical ceramic parts via open source high resolution 3D printing machines. Key Eng Mater 6(31):269–274
Oh SH, Ahn DC, Kim YS (2016) A study on the mechanical properties and spring back of 3D aluminum sheets. Int J Precis Eng Manuf 17(5):671–677
Qiao XQ, Wei J, Huang T (2009) Service collaboration approach based on decentralized mediation model: service collaboration approach based on decentralized mediation model. J Softw 20(6):1470–1486
Rahman K, Khan A, Nam NM et al (2011) Study of drop-on-demand printing through multi-step pulse voltage. Int J Precis Eng Manuf 12(4):663–669
Ren Y, Guan JB, Ao Qi (2010) LHFR: a hierarchical failure recovery algorithm for long running transaction. J Comput Res Dev 47(10):1805–1811
Sheng BY, Zhang CL, Yin XY et al (2016) Common intelligent semantic matching engines of cloud manufacturing service based on OWL-S. Int J Adv Manuf Technol 84(1):103–118
Song XP, Gong YL (2015) Design of a SP-based message waiting indications model. Electron Sci Technol 28(7):78–80
Song TX, Zhang CL, Huang BQ (2013) A cloud manufacturing service platform for small and medium enterprises. Comput Integr Manuf Syst 5(5):47–52 (Chinese)
Song TX, Liu HM, Wei CM et al (2014) Common engines of cloud manufacturing service platform for SMEs. Int J Adv Manuf Technol 73(1):557–569
Tao F, Zhao D, Hu Y, Zhou Z (2008a) Resource service composition and its optimal-selection based on particle swarm optimization in manufacturing grid system. IEEE Trans Ind Inf 4(4):315–327
Tao F, Hu YF, Zhou ZD (2008b) Study on manufacturing grid & its resource service optimal-selection system. Int J Adv Manuf Technol 37(9–10):1022–1041
Tao F, Hu Y, Zhao D, Zhou Z, Zhang H, Lei Z (2009) Study on manufacturing grid resource service QoS modeling and evaluation. Int J Adv Manuf Technol 41(9–10):1034–1042
Tao F, Zhang L, Zhang ZH, Nee AYC (2010) A quantum multi-agent evolutionary algorithm for selection of partners in a virtual enterprise. CIRP Ann-Manuf Technol 59(1):485–488
Tao F, Zhang L, Nee AYC (2011) A review of the application of grid technology in manufacturing. Int J Prod Res 49(13):4119–4155
Tao F, Zhang L, Lu K, Zhao D (2012) Study on manufacturing grid resource service optimal-selection and composition framework. Enterp Inf Syst 6(2):237–264
Tao F, Zhang L, Ying C (2013) A ranking chaos algorithm for dual scheduling of cloud service and computing resource in private cloud. Comput Indus 64(4):448–463
Tao F, Laili YJ, Zhang L, Zhang ZH, Nee AYC (2014) QMAEA: a quantum multi-agent evolutionary algorithm for multi-objective combinatorial optimization. SIMULATION 90(2):182–204
Tao F, Li C, Liao TW, Laili YJ (2016) BGM-BLA: a new algorithm for dynamic migration of virtual machines in cloud computing. IEEE Trans Serv Comput. (99): 910–925
Tao F, Cheng Y, Zhang L, Nee AYC (2017a) Advanced manufacturing systems: socialization characteristics and trends. J Intell Manuf 28(5):1079–1094
Tao F, Bi L, Zuo Y, Nee AYC (2017b) A cooperative co-evolutionary algorithm for large-scale process planning with energy consideration. J Manuf Sci Eng-Trans ASME 139(6):061016
Usuki S, Kanaka H, Miura KT (2013) Generation and control of 3D standing wave illumination for wide-field high-resolution 3D microscopic measurement. Int J Precis Eng Manuf 14(1):55–60
Vatani M, Lu Y, Engeberg ED et al (2015) Combined 3D printing technologies and material for fabrication of tactile sensors. Int J Precis Eng Manuf 16(7):1375–1383
Wei CM, Zhang CL, Song TX et al (2013) A cloud manufacturing service management model and its implementation. Int Confer Serv Sci ICSS 5(5):60–63
Wu D, Thames JL, Rosen DW, Schaefer D (2013) Enhancing the product realization process with cloud-based design and manufacturing systems, transactions of the ASME. J Comput Inf Sci Eng 13(4):1172–1186
Wu D, Rosen DW, Wang L, Schaefer D (2015) Cloud-based design and manufacturing: a new paradigm in digital manufacturing and design innovation. Comput-Aided Des 59(1):1–14
Yang HC (2010) Cloud manufacturing is a kind of manufacturing service. Manuf Inform Eng China 11(6):22–23
Yin S, Yin C, Liu F (2011) Outsourcing resource integration service mode and semantic description in cloud manufacturing environment. Comput Integr Manuf Syst 17(3):525–532 (Chinese)
Yin C, Xia Q, Li ZW (2012) Semantic matching technique of cloud manufacturing service based on OWL-S. Comput Integr Manuf Syst 7(7):1494–1502 (Chinese)
Yong BS, Yun YH, Joo KN (2016) 3D multi-layered film thickness profile measurements based on photometric type imaging ellipsometry. Int J Precis Eng Manuf 17(8):989–993
Zhang JF (2013) QoS-Based top-k web service selection in service composition. Master dissertation, Department of Mechanical Engineering, Zhejiang Normal University, Hangzhou city, Mass
Zhang RX, Zhu GL, Yang GZ (2009) A new measure of semantic similarity between Chinese words based on knowledge graphs. J Chin Inform Process 23(3):116–120, 2009
Zhu S (2014) The third industrial revolution, advanced manufacturing industry and heat treatment technology. Heat Treat Met 39(1):42–45
Zhuang WY (2014) Research of information exchange module and knowledge service system based on the cloud manufacturing service platform. Master dissertation, Dept. of Comp. Inner Mongolia University of Science & Technology, Baotou city, Mass, 2014
Acknowledgements
This work is partially supported by the National Key Technology Research and Development Program of China and Nature Science Foundation of Hubei Province, China (No. 2016YFB1101700) and (No. 2015CFA115).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, C., Sheng, B., Yin, X. et al. Research and development of off-line services for the 3D automatic printing machine based on cloud manufacturing. J Ambient Intell Human Comput 10, 1109–1128 (2019). https://doi.org/10.1007/s12652-017-0615-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12652-017-0615-0