Abstract
The variant design of existing products accounts for a considerable proportion in the process of new product design. Parametric design technology is an effective mean to reuse existing design solutions. However, the current design technology has been unable to meet the needs of product-level parametric rapid design. This paper proposes a product-level parametric management and rapid design method based on the idea of holographic modeling. Firstly, a mechanism to manage the parametric based model (PBM) is set up, and then the dimension management technology is put forward with analyzing the data structure of the base model, meanwhile, the dimension expression, classification, nomenclature and management rules are given. Then, the rapid design method based on PBM is studied, the rapid design principle of the 3D model is described, and the corresponding depth traversal of dimension process is given. At last, a parametric design system for compensator product is developed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Aldefeld B (1988) Variation of geometries based on a geometric-reasoning method. Comput Aided Des 20(3):117–126. https://doi.org/10.1016/0010-4485(88)90019-X
Ashley S (1997) Rapid-response design. Mech Eng 119(12):72–74
Bodein Y, Rose B, Caillaud E (2014) Explicit reference modeling methodology in parametric cad system. Comput Ind 65(1):136–147. https://doi.org/10.1016/j.compind.2013.08.004
Brown DC (1998) Defining configuring. Artif Intell Eng Des Anal Manuf 12(4):301–305. https://doi.org/10.1017/S0890060498124034
Chang KH, Joo SH (2006) Design parameterization and tool integration for cad-based mechanism optimization. Adv Eng Softw 37(12):779–796. https://doi.org/10.1016/j.advengsoft.2006.05.005
Chapman CB, Pinfold M (2001) The application of a knowledge based engineering approach to the rapid design and analysis of an automotive structure. Adv Eng Softw 32(12):903–912. https://doi.org/10.1016/S0965-9978(01)00041-2
Fujita K, Yoshida H (2004) Product variety optimization simultaneously designing module combination and module attributes. Concurr Eng 12(2):105–118. https://doi.org/10.1177/1063293X04044758
Gao XS, Chou SC (1998) Solving geometric constraint systems. I. A global propagation approach. Comput Aided Des 30(1):47–54. https://doi.org/10.1016/S0010-4485(97)00052-3
GB/T12777-2008 (2008) General technical conditions for metal bellows expansion joint. China Standard
Ghassabzadeh M, Ghassemi H (2013) An innovative method for parametric design of planing tunnel vessel hull form. Ocean Eng 60(2):14–27. https://doi.org/10.1016/j.oceaneng.2012.11.015
Gunn TG (1982) The mechanization of design and manufacturing. Sci Am 247(3):114–130. https://doi.org/10.1038/scientificamerican0982-114
Guo Y, Hu J, Peng Y (2012) A CBR system for injection mould design based on ontology: a case study. Comput Aided Des 44(6):496–508. https://doi.org/10.1016/j.cad.2011.12.007
Huang GQ, Li L, Chen X (2007) A tandem evolutionary algorithm for platform product customization. J Comput Inf Sci Eng 7(2):151–159. https://doi.org/10.1115/1.2720883
Lee JY, Kim K (1996) Geometric reasoning for knowledge-based parametric design using graph representation. Comput Aided Des 28(10):831–841. https://doi.org/10.1016/0010-4485(96)00016-4
Lee JY, Kim K (1998) A 2-d geometric constraint solver using dof-based graph reduction. Comput Aided Des 30(11):883–896. https://doi.org/10.1016/S0010-4485(98)00045-1
Leizerowicz W, Lin J, Fox MS (1996) Collaborative design using WWW. In: Proceedings of the WET-ICE’96, CERC, University of West Virginia
Li L, Huang GQ (2009) Multiobjective evolutionary optimisation for adaptive product family design. Int J Comput Integr Manuf 22(4):299–314. https://doi.org/10.1080/09511920802014920
Light R, Gossard D (1982) Modification of geometric models through variational geometry. Comput Aided Des 14(4):209–214.https://doi.org/10.1016/0010-4485(82)90292-5
Mercado-Colmenero JM, Rubio-Paramio MA, Vizan-Idoipe A et al (2017) A new procedure for the automated design of ejection systems in injection molds. Robotics Comput Integr Manuf 46:68–85. https://doi.org/10.1016/j.rcim.2016.12.006 pp
Mok CK, Chin KS, Lan HB (2008) An internet-based intelligent design system forinjection moulds. Robotics Comput Integr Manuf 24(1):1–15. https://doi.org/10.1016/j.rcim.2006.05.003
Münzer C, Shea K, Helms B (2012) Automated parametric design synthesis using graph grammars and constraint solving. In: ASME 2012 international design engineering technical conferences and computers and information in engineering conference, pp 517–528. https://doi.org/10.1115/DETC2012-70313
Nayak RU, Chen W, Simpson TW (2002) A variation-based method for product family design. Eng Optim 34(1):65–81. https://doi.org/10.1080/03052150290004621
Qian XM (2005) Research on the key technique of concurrent engineering oriented product development process. Doctoral dissertation, Nanjing University of Aeronautics and Astronautics. https://doi.org/10.7666/d.y696749
Qian XM, Wang NS, Chen WF et al (2003) Research on product structure model based on rapid product design. Comput Integr Manuf Syst 9(1):11–14. https://doi.org/10.3969/j.issn.1006-5911.2003.01.003
Rahimifard A, Weston RH (2009) A resource-based modelling approach to support responsive manufacturing systems. Int J Adv Manuf Technol 45(11–12):1197–1214. https://doi.org/10.1007/s00170-009-2025-8
Simpson TW, Maier JR, Mistree F (2001) Product platform design: method and application. Res Eng Des 13(1):2–22.https://doi.org/10.1007/s001630100002
Sutherland IE (1964) Sketchpad: a man-machine graphical communication system (outstanding dissertations in the computer sciences), vol 18, no 3, pp 265–272. Garland Publishing, Inc, New York. https://doi.org/10.1177/003754976400200514
Suzuki H, Ando H, Kimura F (1990) Geometric constraints and reasoning for geometrical cad systems. Comput Graph 14(2):211–224. https://doi.org/10.1016/0097-8493(90)90033-T
Tao CS (2004) Research on partial parametric design method and system realization. Doctoral dissertation, Nanjing University of Science and Technology. https://doi.org/10.7666/d.y624562
Tseng MM, Jiao J (1997) Case-based evolutionary design for mass customization. Comput Ind Eng 33(1):319–323. https://doi.org/10.1016/S0360-8352(97)00102-2
Tseng MM, Jiao J, Merchant ME (1996) Design for mass customization. CIRP Ann Manuf Technol 45(1):153–156. https://doi.org/10.1016/S0007-8506(07)63036-4
Wang F, Yu XL (2001) Research and development of product-level three-dimensional parametric design system. J Comput Aided Des Comput Graph 13(11):1012–1018. https://doi.org/10.3321/j.issn:1003-9775.2001.11.010
Xu MX (1998) Research and implementation of parametric design model. Doctoral dissertation, Graduate School of Chinese Academy of Sciences (Institute of Computing Technology)
Zhang F, Chen ZN, Yan XG et al (2008) Product configuration model based on SML. China Mech Eng 19(6):683–687. https://doi.org/10.3321/j.issn:1004-132X.2008.06.013
Acknowledgements
The authors acknowledge the financial sponsored by the National Natural Science Foundation of China (Grant no. 51405081), Qing Lan Project, the Fundamental Research Funds for the Central Universities, and the Six talent peaks project in Jiangsu Province.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, X., Tang, L., Yi, Y. et al. Intelligent design based on holographic model using parametric design method. J Ambient Intell Human Comput 10, 1241–1255 (2019). https://doi.org/10.1007/s12652-018-0775-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12652-018-0775-6