Skip to main content Accessibility help
×
Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-28T11:46:16.942Z Has data issue: false hasContentIssue false

13 - Mobility management in small cell heterogeneous networks

Published online by Cambridge University Press:  05 December 2015

Peter Legg
Affiliation:
Huawei Technologies
Xavier Gelabert
Affiliation:
Huawei Technologies
Alagan Anpalagan
Affiliation:
Ryerson Polytechnic University, Toronto
Mehdi Bennis
Affiliation:
University of Oulu, Finland
Rath Vannithamby
Affiliation:
Intel Corporation, Portland, Oregon
Get access

Summary

Introduction

In cellular networks, handover refers to the mechanism by which the set of radio links between an active mode mobile device and base station cells is modified. Mobility in the idle mode (when the mobile has no data bearers established and is not transmitting or receiving user plane traffic), termed cell selection/reselection, typically ensures that the UE selects the strongest available cell in preparation for an outgoing or incoming call/data session. Handover reliability is a key performance indicator (KPI) since it directly impacts the perceived quality of experience (QoE) of the end user. In contrast, cell reselection is less important since no bearers are established and suboptimal performance is apparent only on call establishment and as a signaling cost to the network operator. For this reason, the remainder of this chapter focuses on handover.

In GSM and LTE the mobile supports only a single radio link such that the handover swaps this link from one cell (the serving cell) to another (the target cell). In WCDMA, however, multiple links (on the same frequency) may be established (known as “soft handover”). Handovers can be classified as:

• intra-RAT, meaning within the same radio access technology (RAT), for example, LTE to LTE

  1. • intra-frequency (serving and target cells are on the same frequency)

  2. • inter-frequency (serving and target cells are not on the same frequency)

• inter-RAT

  1. • between cells of different RATs.

Handover may be triggered for a number of reasons:

  1. • to maintain the connectivity of the mobile and support data transfer (often called a “coverage handover”)

  2. • to balance the loading of cells with overlapping coverage or to handover a mobile between overlapping cells to ensure data rates demanded by an ongoing service are met (often called a “vertical handover”).

Vertical handovers target stationary mobiles, implying that the radio conditions of links to serving and target cells are relatively stable. More challenging are coverage handovers that result from the motion of the mobile, leaving the coverage of the serving cell and entering that of the target cell. Since indoor users are usually stationary, the focus of coverage handovers is on outdoor users, on foot or in vehicles.

Type
Chapter
Information
Publisher: Cambridge University Press
Print publication year: 2015

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Gelabert, X., Zhou, G., and Legg, P., “Mobility performance and suitability of macro cell power-off in LTE dense small cell HetNets,” 2013 IEEE 18th International Workshop on Computer Aided Modeling Analysis and Design of Communication Links and Networks (CAMAD) (CAMAD 2013), Berlin, Germany, Sep. 2013.Google Scholar
[2] Zhou, G. and Legg, P., “An evolved mobility robustness optimization algorithm for LTE heterogeneous networks,” Vehicular Technology Conference (VTC Spring), 2013 IEEE 77th, 2013, pp. 1–5.
[3] 3GPP TR 37.834 V1.0.0, “Study on WLAN/3GPP radio interworking (Release 12),” Tech. Rep., Aug. 2013.
[4] Legg, P., Hui, G., and Johansson, J., “A simulation study of LTE intra-frequency handover performance,” Vehicular Technology Conference Fall (VTC 2010-Fall), 2010 IEEE 72nd, 2010, pp. 1–5.
[5] Lopez-Perez, D., Guvenc, I., and Chu, X., “Mobility management challenges in 3GPP heterogeneous networks,” IEEE Communications Magazine, vol. 50, no. 12, pp. 70–78, 2012.CrossRefGoogle Scholar
[6] 3GPP TR 36.839 V11.1.0, “Mobility enhancements in heterogeneous networks (Release 11),” Tech. Rep., Dec. 2012.
[7] 3GPP TR 36.932 V12.0.0 (2012–12), “Scenarios and requirements for small cell enhancements for E-UTRA and E-UTRAN (Release 12),” Tech. Rep., Dec. 2012.
[8] 3GPP TS 36.300 V8.12.0, “E-UTRA and E-UTRAN; overall description; stage 2 (Release 8),” Tech. Rep., Apr. 2010.
[9] 3GPP TS 36.331 V8.20.0, “E-UTRA radio resource control (RRC); protocol specification (Release 8),” Tech. Rep., Jul. 2013.
[10] 3GPP TR 36.842 V1.0.0, “Study on small cell enhancements for E-UTRA and E-UTRAN: higher layer aspects,” Tech. Rep., Nov. 2013.
[11] Zhou, G., Legg, P., and Hui, G., “A network controlled handover mechanism and its optimization in LTE heterogeneous networks,” 2013 IEEE Wireless Communications and Networking Conference (WCNC), 2013, pp. 1915–1919.
[12] Baker, M., Sesia, S., and Toufik, I., LTE: The UMTS Long Term Evolution: From Theory to Practice; [Including Release 10 for LTE-Advanced]. Wiley, 2011.Google Scholar
[13] R2-094304 RAN2 #67 Qualcomm, “RLF handling for real time services,” Tech. Rep., Aug. 2009.
[14] Kurjenniemi, J. and Henttonen, T., “Effect of measurement bandwidth to the accuracy of inter-frequency RSRP measurements in LTE,” Personal, Indoor and Mobile Radio Communications, 2008. (PIMRC 2008). IEEE 19th International Symposium, 2008, pp. 1–5.
[15] 3GPP TS 36.133 V9.15.0, “Requirements for support of radio resource management (Release 9),” Tech. Rep., Mar. 2013.
[16] Qualcomm, “LTE mobility enhancements,” White Paper, Feb. 2010.
[17] Parkvall, S.et al., “Heterogeneous network deployments in LTE: the soft-cell approach,” Ericsson Review, Feb. 2011.
[18] Ishii, H., Kishiyama, Y., and Takahashi, H., “A novel architecture for LTE-B: C-plane/U-plane split and phantom cell concept,” Globecom Workshops (GC Wkshps), 2012 IEEE, 2012, pp. 624–630.
[19] 3GPP TS 32.522 V10.6.0, “Self-organizing networks (SON) policy network resource model (NRM) integration reference point (IRP); information service (IS) (Release 10),” Tech. Rep., Sep. 2013.
[20] 3GPP TS 36.423 V9.6.0, “X2 application protocol (X2AP) (Release 9),” Tech. Rep., Apr. 2011.
[21] Jansen, T.et al., “Handover parameter optimization in LTE self-organizing networks,” Vehicular Technology Conference Fall (VTC 2010-Fall), 2010 IEEE 72nd, Sep. 2010.
[22] Jansen, T.et al., “Weighted performance based handover parameter optimization in LTE,” Vehicular Technology Conference (VTC Spring), 2011 IEEE 73rd, May 2011.
[23] Hämäläinen, S., Sanneck, H., and Sartori, C., LTE Self-Organising Networks (SON): Network Management Automation for Operational Efficiency. Wiley, 2011.CrossRefGoogle Scholar
[24] Kitagawa, K., Komine, T., Yamamoto, T., and Konishi, S., “A handover optimization algorithm with mobility robustness for LTE systems,” Personal Indoor and Mobile Radio Communications (PIMRC), 2011 IEEE 22nd International Symposium on, Sept 2011, pp. 1647–1651.
[25] Hui, G. and Legg, P., “Soft metric assisted mobility robustness optimization in LTE networks,” Wireless Communication Systems (ISWCS), 2012 International Symposium on, 2012, pp. 1–5.
[26] Watanabe, Y., Sugahara, H., Matsunaga, Y., and Hamabe, K., “Inter-eNB coordination-free algorithm for mobility robustness optimization in LTE Het-Net,” Vehicular Technology Conference (VTC Spring), 2013 IEEE 77th, June 2013.
[27] Small Cell Forum, “Integrated femto–WiFi networks,” Tech. Rep., Feb. 2012.
[28] 3GPP TR 22.934 V1.2.0, “Feasibility study on 3GPP system to WLAN inter-working,” Tech. Rep., May 2002.
[29] Salkintzis, A. K., Fors, C., and Pazhyannur, R., “WLAN-GPRS integration for next-generation mobile data networks,” Wireless Communications, IEEE, vol. 9, no. 5, pp. 112–124, 2002.CrossRefGoogle Scholar
[30] 3GPP TS 23.234 V11.0.0, “3GPP system to wireless local area network (WLAN) interworking; system description (Release 11),” Tech. Rep., Sep. 2012.
[31] 3GPP TS 23.402 V12.2.0, “Architecture enhancements for non-3GPP accesses (Release 12),” Tech. Rep., Sep. 2013.

Save book to Kindle

To save this book to your Kindle, first ensure coreplatform@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×