Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-25T20:16:10.145Z Has data issue: false hasContentIssue false
  • English
  • Français

Design of motor cable artificial muscle (MC-AM) with tendon sheath–pulley system (TSPS) for musculoskeletal robot

Published online by Cambridge University Press:  10 February 2023

Jianbo Yuan Open the ORCID record for Jianbo Yuan [Opens in a new window] ,
Yerui Fan Open the ORCID record for Yerui Fan [Opens in a new window]  and
Yaxiong Wu
Jianbo Yuan*
Affiliation:
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
Yerui Fan
Affiliation:
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
Yaxiong Wu
Affiliation:
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
*
*Corresponding author. E-mail: jianbo.yuan@qq.com.
Get access Rights & Permissions [Opens in a new window]

Abstract

In an unstructured environment, the arm can perform complicated tasks with rapidity, flexibility, and robustness. It is difficult to configure multiple artificial muscles similar to an arm in the compact space of a robotic arm. When muscle tension is transferred, mechanisms like tendon-sheath/tendon-pulley may be installed in a compact space to develop musculoskeletal robots that are closer to the arm. However, handling variable frictional nonlinearity and elastic cable deformation is necessary for transmission stability. In this study, the modular artificial muscle system (MAMS), including motor cable artificial muscle and tendon sheath–pulley system (TSPS), that can be installed remotely and transmit muscle tension in narrow paths, is designed. The feed-forward multi-layer neural network (FF-MNN) approach is utilized to discuss the relationship between the measurable input tension of TSPS and the unmeasurable output tension and cable elongation. Subsequently, the lightweight musculoskeletal arm (LM-Arm) is built to verify the validity of MAMS. Through trials, the experiments of MAMS after friction compensating and the LM-Arm’s end-point 3D trajectory tracking are investigated. The results show that average errors of the active and passive muscles tension are 3.87 N and 3.51 N, respectively, under conditions of larger load and higher contraction velocity. The average muscle length error of trajectory tracking is 0.00078 m (0.72%). The suggested MAMS may successfully build a musculoskeletal robot that has similar flexibility and morphology to the arm. It can also be utilized to power various pieces of machinery, such as rescue robot, invasive surgical robots, dexterous hands, and wearable exoskeletons.

Keywords

motor cable artificial muscletendon sheath–pulley systemfeed-forward multi-layer neural networkfriction compensationlightweight musculoskeletal arm
Type
Research Article
Information
Robotica , Volume 41 , Issue 5 , May 2023 , pp. 1634 - 1650
Copyright
© The Author(s), 2023. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Holzbaur, K. R. S., Murray, W. M. and Delp, S. L., “A model of the upper extremity for simulating musculoskeletal surgery and analyzing neuromuscular control,” Ann. Biomed. Eng. 33(6), 829–840 (2005).CrossRefGoogle Scholar
Margareta, N. and F.Victor, H.. Basic Biomechanics of the Musculoskeletal System (Julie K. Stegman, Philadelphia, 2012).Google Scholar
Huang, X., Wu, W. and Qiao, H., “Connecting model-based and model-free control with emotion modulation in learning systems,” IEEE Trans. Syst. Man Cybern. Syst. 51(8), 4624–4638 (2021).CrossRefGoogle Scholar
Huang, X., Wu, W., Qiao, H. and Ji, Y., “Brain-inspired motion learning in recurrent neural network with emotion modulation,” IEEE Trans. Cogn. Dev. Syst. 10(4), 1153–1164 (2018).CrossRefGoogle Scholar
Qiao, H., Chen, J. and Huang, X., “A survey of brain-inspired intelligent robots: Integration of vision, decision, motion control, and musculoskeletal systems,” IEEE Trans. Cybern. 52(10), 11267–11280 (2021).CrossRefGoogle Scholar
Kurumaya, S., Nabae, H., Endo, G. and Suzumori, K., “Design of thin McKibben muscle and multifilament structure,” Sens. Actuators A Phys. 261, 66–74 (2017).CrossRefGoogle Scholar
Tawfick, S. and Tang, Y., “Stronger artificial muscles, with a twist,” Science (New York, N.Y.) 365(6449), 125–126 (2019).Google ScholarPubMed
Li, S., Vogt, D. M., Rus, D. and Wood, R. J., “Fluid-driven origami-inspired artificial muscles,” Proc. Natl. Acad. Sci. 114(50), 13132–13137 (2017).CrossRefGoogle ScholarPubMed
Cho, K. H., Kim, Y., Yang, S. Y., Kim, K., Park, J. H., Rodrigue, H., Moon, H., Koo, J. C., Nam, J. and Choi, H. R., “Artificial musculoskeletal actuation module driven by twisted and coiled soft actuators,” Smart Mater. Struct. 28(12), 125010 (2019).CrossRefGoogle Scholar
Acome, E., Mitchell, S. K., Morrissey, T. G., Emmett, M. B., Benjamin, C., King, M., Radakovitz, M. and Keplinger, C., “Hydraulically amplified self-healing electrostatic actuators with muscle-like performance,” Science 359(6371), 61–65 (2018).CrossRefGoogle ScholarPubMed
Asano, Y., Okada, K. and Inaba, M., “Design principles of a human mimetic humanoid: Humanoid platform to study human intelligence and internal body system,” Sci. Robot. 2(13), eaaq0899 (2017).CrossRefGoogle ScholarPubMed
Hitzmann, A., Masuda, H., Ikemoto, S. and Hosoda, K., “Anthropomorphic musculoskeletal 10 degrees-of-freedom robot arm driven by pneumatic artificial muscles,” Adv. Robot. 32(15), 865–878 (2018).CrossRefGoogle Scholar
Kanik, M., Orguc, S., Varnavides, G., Kim, J., Benavides, T., Gonzalez, D., Akintilo, T., Tasan, C. C., Chandrakasan, A. P., Fink, Y. and Anikeeva, P., “Strain-programmable fiber-based artificial muscle,” Science (American Association for the Advancement of Science) 365(6449), 145–150 (2019).CrossRefGoogle ScholarPubMed
Yuan, J., Wu, Y., Wang, B. and Qiao, H., “Musculoskeletal Robot with Motor Driven Artificial Muscle,” In: 2021 6th IEEE International Conference on Advanced Robotics and Mechatronics (2021).Google Scholar
Min, S. and Yi, S., “Development of cable-driven anthropomorphic robot hand*,” IEEE Robot. Autom. Lett. 6(2), 1176–1183 (2021).CrossRefGoogle Scholar
Dežman, M., Asfour, T., Ude, A. and Gams, A., “Mechanical design and friction modelling of a cable-driven upper-limb exoskeleton,” Mech. Mach. Theory 171(1), 104746 (2022).CrossRefGoogle Scholar
Idà, E., Briot, S. and Carricato, M., “Identification of the inertial parameters of underactuated cable-driven parallel robots,” Mech. Mach. Theory 167(6), 104504 (2022).CrossRefGoogle Scholar
Watanabe, K., Kanno, T., Ito, K. and Kawashima, K., “Single-master dual-slave surgical robot with automated relay of suture needle,” IEEE Trans. Ind. Electron. 65(8), 6343–6351 (2018).CrossRefGoogle Scholar
Ding, Y., Kim, M., Kuindersma, S. and Walsh, C. J., “Human-in-the-loop optimization of hip assistance with a soft exosuit during walking,” Sci. Robot. 3(15), eaar5438 (2018).CrossRefGoogle ScholarPubMed
Nycz, C. J., Butzer, T., Lambercy, O., Arata, J., Fischer, G. S. and Gassert, R., “Design and characterization of a lightweight and fully portable remote actuation system for use with a hand exoskeleton,” IEEE Robot. Autom. Lett. 1(2), 976–983 (2016).CrossRefGoogle Scholar
Wang, Z., Sun, Z. and Phee, S. J., “Modeling tendon-sheath mechanism with flexible configurations for robot control,” Robotica 31(7), 1131–1142 (2013).CrossRefGoogle Scholar
Sun, Z., Wang, Z. and Phee, S. J., “Elongation modeling and compensation for the flexible tendon--sheath system,” IEEE/ASME Trans. Mechatron. 19(4), 1243–1250 (2014).CrossRefGoogle Scholar
Do, T. N., Tjahjowidodo, T., Lau, M. W. S. and Phee, S. J., “An investigation of friction-based tendon sheath model appropriate for control purposes,” Mech. Syst. Signal Process. 42(1-2), 97–114 (2014).CrossRefGoogle Scholar
Wu, Q., Wang, X., Chen, L. and Du, F., “Transmission model and compensation control of double-tendon-sheath actuation system,” IEEE Trans. Ind. Electron. 62(3), 1599–1609 (2015).CrossRefGoogle Scholar
Wang, H., Kinugawa, J. and Kosuge, K., “Exact kinematic modeling and identification of reconfigurable cable-driven robots with dual-pulley cable guiding mechanisms,” IEEE/ASME Trans. Mechatron. 24(2), 774–784 (2019).CrossRefGoogle Scholar
Jeong, U. and Cho, K., “Control of a bowden-cable actuation system with embedded BoASensor for soft wearable robots,” IEEE Trans. Ind. Electron. 67(9), 7669–7680 (2020).CrossRefGoogle Scholar
Wang, S., Na, J. and Xing, Y., “Adaptive optimal parameter estimation and control of servo mechanisms: Theory and experiments,” IEEE Trans. Ind. Electron. 68(1), 598–608 (2021).CrossRefGoogle Scholar
Na, J., Xing, Y. and Costa-Castello, R., “Adaptive estimation of time-varying parameters with application to roto-magnet plant,” IEEE Trans. Syst. Man Cybern. Syst. 51(2), 731–741 (2021).CrossRefGoogle Scholar
Yang, C., Jiang, Y., He, W., Na, J., Li, Z. and Xu, B., “Adaptive parameter estimation and control design for robot manipulators with finite-time convergence,” IEEE Trans. Ind. Electron. 65(10), 8112–8123 (2018).CrossRefGoogle Scholar
Su, H., Qi, W., Hu, Y., Sandoval, J., Zhang, L., Schmirander, Y., Chen, G., Aliverti, A., Knoll, A., Ferrigno, G. and De Momi, E., “Towards model-free tool dynamic identification and calibration using multi-layer neural network,” Sensors (Basel) 19(17), 3636 (2019).CrossRefGoogle ScholarPubMed
Wang, S., Shao, X., Yang, L. and Liu, N., “Deep learning aided dynamic parameter identification of 6-DOF robot manipulators,” IEEE Access 8, 138102–138116 (2020).CrossRefGoogle Scholar
Akhmetzyanov, A., Rassabin, M., Maloletov, A., Fadeev, M. and Klimchik, A., “Deep Learning with Transfer Learning Method for Error Compensation of Cable-driven Robot,” In: 17th International Conference on Informatics in Control, Automation and Robotics (2020).Google Scholar
Lu, J., Richter, F. and Yip, M., “Pose estimation for robot manipulators via keypoint optimization and sim-to-real transfer,” IEEE Robot. Autom. Lett. 7(2), 4622–4629 (2021).CrossRefGoogle Scholar
Salaris, P., Cognetti, M., Spica, R. and Giordano, P. R., “Online optimal perception-aware trajectory generation,” IEEE Trans. Robot. 35(6), 1307–1322 (2019).CrossRefGoogle Scholar
Cui, X. G., Geng, J. and Ding, J. W., “Study on experiment of terminal fixture connection of steel wire rope,” Appl. Mech. Mater. 351-352, 1415–1418 (2013).CrossRefGoogle Scholar
Kaneko, M., Yamashita, T. and Tanie, K., “Basic Considerations on Transmission Characteristics for Tendon Drive Robots,” In: Fifth International Conference on Advanced Robotics ’Robots in Unstructured Environments’, vol. 1 (1991) pp. 827–832.CrossRefGoogle Scholar
Jeong, U. and Cho, K., “A novel low-cost, large curvature bend sensor based on a bowden-cable,” Sensors 16(7), 961 (2016).CrossRefGoogle ScholarPubMed
Liang, Y., Du, Z., Wang, W. and Sun, L., “A novel position compensation scheme for cable-pulley mechanisms used in laparoscopic surgical robots,” Sensors 17(10), 2257 (2017).CrossRefGoogle ScholarPubMed
Zhong, S., Chen, J., Niu, X., Fu, H. and Qiao, H., “Reducing redundancy of musculoskeletal robot with convex hull vertexes selection,” IEEE Trans. Cogn. Dev. Syst. 12(3), 601–617 (2020).CrossRefGoogle Scholar
De Sapio, V., Warren, J., Khatib, O. and Delp, S., “Simulating the task-level control of human motion: A methodology and framework for implementation,” Vis. Comput. 21(5), 289–302 (2005).CrossRefGoogle Scholar