Acoustic Field Analysis of Surface Acoustic Wave Dispersive Delay Lines Using Inclined Chirp IDT

Koichiro MISU
Koji IBATA
Shusou WADAKA
Takao CHIBA
Minoru K. KUROSAWA

Publication
IEICE TRANSACTIONS on Fundamentals of Electronics, Communications and Computer Sciences   Vol.E90-A    No.5    pp.1014-1020
Publication Date: 2007/05/01
Online ISSN: 1745-1337
DOI: 10.1093/ietfec/e90-a.5.1014
Print ISSN: 0916-8508
Type of Manuscript: PAPER
Category: Ultrasonics
Keyword: 
surface acoustic wave devices,  dispersive delay lines,  acoustic fields,  angular spectrum of plane wave method,  

Full Text: PDF(827.8KB)>>
Buy this Article


Summary: 
Acoustic field analysis results of surface acoustic wave dispersive delay lines using inclined chirp IDTs on a Y-Z LiNbO3 substrate are described. The calculated results are compared with optical measurements. The angular spectrum of the plane wave method is applied to calculation of the acoustic fields considering the anisotropy of the SAW velocity by using the polynomial approximation. Acoustic field propagating along the Z-axis of the substrate, which is the main beam excited by the inclined chirp IDT, shows asymmetric distribution between the +Z and -Z directions. Furthermore the SAW beam propagating in a slanted direction with an angle of +18 from the Z axis to the X-axis is observed. It is described that the SAW beam propagating in a slanted direction is the first side lobe excited by the inclined chirp IDT. The acoustic field shows asymmetric distribution along the X-axis because of the asymmetric structure of the inclined chirp IDT. Finally, acoustic field of a two-IDT connected structure which consists of the same IDTs electrically connected in series is presented. The acoustic field of the two-IDT connected structure is calculated to be superposed onto the calculated result of the acoustic field exited by one IDT on the calculated result shifted along the X-axis. Two SAW beams excited by IDTs are observed. The distributions of the SAW beams are not in parallel. The calculated results show good agreement with the optical measurement results.

open access publishing via