|
For Full-Text PDF, please login, if you are a member of IEICE,
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
|
Artificial Dielectric Rectangular Resonator with Novel Anisotropic Permittivity and Its TE10δ Mode Waveguide Filter Application
Achmad MUNIR Noriaki HAMANAGA Hiroshi KUBO Ikuo AWAI
Publication
IEICE TRANSACTIONS on Electronics
Vol.E88-C
No.1
pp.40-46 Publication Date: 2005/01/01 Online ISSN:
DOI: 10.1093/ietele/e88-c.1.40 Print ISSN: 0916-8516 Type of Manuscript: Special Section PAPER (Special Section on Recent Trends of Microwave and Millimeter-Wave Passive Circuit Components and Technologies for Improvement of Characteristics) Category: Keyword: anisotropic permittivity, artificial dielectrics, bandpass filter, coupling coefficient, dielectric resonator,
Full Text: PDF(1.2MB)>>
Summary:
A miniaturized rectangular resonator made of a novel anisotropic artificial dielectric material is investigated which has advantages of small size and big separation of the higher-modes. To obtain a property of anisotropic permittivity, artificial dielectric material is fabricated by lamination of rectangular metal strips etched on a printed circuit board. Artificial dielectric rectangular resonators are designed to excite TE10δ mode selectively, aligning the rectangular metal patterns along the direction of the mode electric field line. The resonant frequencies and coupling coefficient of artificial dielectric rectangular resonators encapsulated in a metal waveguide are analyzed theoretically, and compared with the experimental result. As a microwave application, a high selectivity TE10δ mode bandpass filter (BPF) using two artificial dielectric rectangular resonators is demonstrated. A two-stage BPF with the center frequency of 1.718 GHz, bandwidth of 78 MHz, and insertion loss of 1.3 dB is successfully realized in a rectangular waveguide.
|
|
|