|
For Full-Text PDF, please login, if you are a member of IEICE,
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
|
A Miniaturized In-Phase Power Divider with a DC Block Function
Hitoshi HAYASHI Tadao NAKAGAWA Kazuhiro UEHARA Yoshihiro TAKIGAWA
Publication
IEICE TRANSACTIONS on Electronics
Vol.E90-C
No.10
pp.2022-2029 Publication Date: 2007/10/01 Online ISSN: 1745-1353
DOI: 10.1093/ietele/e90-c.10.2022 Print ISSN: 0916-8516 Type of Manuscript: PAPER Category: Microwaves, Millimeter-Waves Keyword: in-phase, power, divider, miniaturized, DC block,
Full Text: PDF(1.3MB)>>
Summary:
This paper describes a miniaturized in-phase power divider with a DC block function. We first propose three types of miniaturized in-phase power dividers composed of two distributed transmission lines, a resistor, and three capacitors to function as a DC block. Then, we use a simulation to compare the dividers. The simulation results show that, by properly selecting circuit configuration, we both achieve broadband frequency characteristics and miniaturize circuitry as compared to the conventional Wilkinson power divider with two DC block capacitors. Finally, an experimental UHF power divider fabricated to test the design concept is presented. Over the frequency range from 0.44 to 0.66 GHz, the experimental power divider exhibits power splits of -3.20.2 dB, return losses greater than 20 dB, and isolation between output ports greater than 20 dB.
|
|
|