To read this content please select one of the options below:

Spatial grasp synthesis for complex objects using model‐based simulation

Yanbin Liu (Department of Mechanical Engineering, The University of New Mexico, Albuquerque, New Mexico, USA)
Gregory Starr (Department of Mechanical Engineering, The University of New Mexico, Albuquerque, New Mexico, USA)
John Wood (Department of Mechanical Engineering, The University of New Mexico, Albuquerque, New Mexico, USA)
Ron Lumia (Department of Mechanical Engineering, The University of New Mexico, Albuquerque, New Mexico, USA)

Industrial Robot

ISSN: 0143-991x

Article publication date: 1 February 2005

598

Abstract

Purpose

Selection of an effective grasp of a complex object using a multifingered gripper is a challenging problem because of the many possible grasp positions that are typically available.

Design/methodology/approach

Given the geometrical description of the particular object feature to be grasped, all feasible grasps are performed in offline simulation using a geometrically accurate model of the desired gripper. The six‐dimensional convex hull for each grasp is computed and archived. This convex hull indicates the span of forces and torques that the grasp can resist. When a grasp is needed the force/torque due to the total object weight is estimated and the best grasp is selected. The selected grasp has minimum peak contact force consistent with equilibrium.

Findings

Experimental trials with several complex object show the method is capable of producing grasps which can support the object and resist external force/torque.

Research limitations/implications

An accurate geometrical description of the feature to be grasped must be known in advance. This would typically be a cylindrical or prismatic portion of the object.

Practical implications

There are many environments in which a dexterous multifingered gripper must be used due to the variety of objects which must be grasped. The results indicate that effective grasps can be selected for complex objects from a database of simulated grasps.

Originality/value

The primary contribution of this paper is the use of a database of simulated grasps on simple graspable features to synthesize grasps on complex objects.

Keywords

Citation

Liu, Y., Starr, G., Wood, J. and Lumia, R. (2005), "Spatial grasp synthesis for complex objects using model‐based simulation", Industrial Robot, Vol. 32 No. 1, pp. 24-31. https://doi.org/10.1108/01439910510573255

Publisher

:

Emerald Group Publishing Limited

Copyright © 2005, Emerald Group Publishing Limited

Related articles