To read this content please select one of the options below:

Super under‐actuated multi‐fingered mechanical hand with modular self‐adaptive gear‐rack mechanism

Wenzeng Zhang (Department of Mechanical Engineering, Tsinghua University, Beijing, China)
Demeng Che (Department of Mechanical Engineering, Tsinghua University, Beijing, China)
Hongbin Liu (Department of Mechanical Engineering, Tsinghua University, Beijing, China)
Xiande Ma (Department of Mechanical Engineering, Tsinghua University, Beijing, China)
Qiang Chen (Department of Mechanical Engineering, Tsinghua University, Beijing, China)
Dong Du (Department of Mechanical Engineering, Tsinghua University, Beijing, China)
Zhenguo Sun (Department of Mechanical Engineering, Tsinghua University, Beijing, China)

Industrial Robot

ISSN: 0143-991x

Article publication date: 1 May 2009

2051

Abstract

Purpose

The purpose of this paper is to present recent work designing a mechanical robotic hand for self‐adaptive grasping, human‐like appearance, which can be used in a humanoid robot. Conventional robotic devices are relatively complex, large, cumbersome and difficult to be installed in a humanoid robot arm. Under‐actuated robot hands use less motors to drive more rotating joints, thus to simplify the mechanical structure, decrease the volume and weight and finally lower the difficulty of control and the cost.

Design/methodology/approach

A novel under‐actuated finger mechanism is designed, which is based on a gear‐rack mechanism, spring constraint and an active sleeve middle phalanx. The principle analyses of its self‐adaptive grasp and end power grasping are given. A new multi‐fingered hand named as TH‐3R Hand is designed based on the finger.

Findings

The design finger mechanism can be used in a robotic hand to make the hand obtain more degrees of freedom (DOF) with fewer actuators, and good grasping function of shape adaptation, decrease the requirement of control system. TH‐3R Hand has five fingers, 15 DOF. All fingers are similar. TH‐3R Hand has many advantages: it is simple in structure, light in weight, easy to control and low in cost. TH‐3R Hand can passively adapt different shapes and sizes of the grasped object. Experimental studies have demonstrated the self‐adaptation in grasping of the finger.

Research limitations/implications

The implication of this research is that under‐actuated robotic hands are appropriate for the missions of grasping different objects. The limitation of the research to date is that issues of sensors, control, and communication have not yet been addressed.

Practical implications

Key technologies of the under‐actuated finger and TH‐3R Hand, with self‐adaptive grasping, human‐like appearance and low‐cost lightweight, are feasible. These technologies have the potential to make a significant impact.

Originality/value

These results present a self‐adaptive under‐actuated grasp concept and a humanoid robotic hand with under‐actuated gear‐rack mechanism.

Keywords

Citation

Zhang, W., Che, D., Liu, H., Ma, X., Chen, Q., Du, D. and Sun, Z. (2009), "Super under‐actuated multi‐fingered mechanical hand with modular self‐adaptive gear‐rack mechanism", Industrial Robot, Vol. 36 No. 3, pp. 255-262. https://doi.org/10.1108/01439910910950522

Publisher

:

Emerald Group Publishing Limited

Copyright © 2009, Emerald Group Publishing Limited

Related articles