A Two-Step Optimization for Extrinsic Calibration of Multiple Camera System (MCS) Using Depth-Weighted Normalized Points | IEEE Journals & Magazine | IEEE Xplore

A Two-Step Optimization for Extrinsic Calibration of Multiple Camera System (MCS) Using Depth-Weighted Normalized Points


Abstract:

A multiple camera system (MCS), which allows only a limited common field-of-view between adjacent cameras, has been chiefly calibrated using a typical 2D-3D point corresp...Show More

Abstract:

A multiple camera system (MCS), which allows only a limited common field-of-view between adjacent cameras, has been chiefly calibrated using a typical 2D-3D point correspondence. However, the correspondence contains a potential instability by which the calibration result can diverge, and the instability has not been studied nor overcome before. We propose a MCS extrinsic calibration method with high robustness and accuracy based on a two-step optimization strategy. Using depth-weighted normalized points, we develop two novel types of point correspondence as follows. The 1st correspondence, Fcb, aims to robustly estimate the MCS extrinsic parameters by overcoming the potential instability that exists in the typical 2D-3D point correspondence. The 2nd correspondence, Fcc, aims to refine the MCS extrinsic parameters by using the direct relation between adjacent cameras. In the simulation, we validated the robustness and high accuracy of the proposed method. We validated its high precision in the field test. In both the simulation and the field test, our method was compared with the state-of-the-art method.
Published in: IEEE Robotics and Automation Letters ( Volume: 6, Issue: 4, October 2021)
Page(s): 6608 - 6615
Date of Publication: 02 July 2021

ISSN Information:

Funding Agency:


Contact IEEE to Subscribe

References

References is not available for this document.