Loading [a11y]/accessibility-menu.js
Optimal Switching Frequency Variation Range Control for Critical Conduction Mode Boost Power Factor Correction Converter | IEEE Journals & Magazine | IEEE Xplore

Optimal Switching Frequency Variation Range Control for Critical Conduction Mode Boost Power Factor Correction Converter


Abstract:

Critical conduction mode boost power factor (PF) correction converter is widely used in low-to-medium power applications for its advantages of high PF, zero-current turn-...Show More

Abstract:

Critical conduction mode boost power factor (PF) correction converter is widely used in low-to-medium power applications for its advantages of high PF, zero-current turn-on of the switch, and no reverse recovery in diode. Nevertheless, the switching frequency varies continually with the input voltage phase angle with traditional constant on-time control. This makes the electromagnetic interference (EMI) spectra display great differences and complicates the design of EMI filter. An optimal switching frequency variation range control strategy is proposed in this article. The optimal harmonics amounts for the lowest switching frequency variation range without and with a limited PF are both figured out. In addition, a lower output voltage ripple is obtained. A prototype has been built and tested in the lab to demonstrate the validity of the theoretical analysis.
Published in: IEEE Transactions on Industrial Electronics ( Volume: 68, Issue: 2, February 2021)
Page(s): 1197 - 1209
Date of Publication: 29 January 2020

ISSN Information:

Funding Agency:


Contact IEEE to Subscribe

References

References is not available for this document.