Abstract:
In this article, we deal with the development of a fractional-order notch filter (FONF) for a grid-connected solar photovoltaic (PV) system. The developed FONF control ap...Show MoreMetadata
Abstract:
In this article, we deal with the development of a fractional-order notch filter (FONF) for a grid-connected solar photovoltaic (PV) system. The developed FONF control approach is used to estimate fundamental active constituents from the distorted load currents, and hence, gating pulses for operating voltage source converter (VSC) are used in the PV system. This control approach for the grid-connected solar PV system is designed to achieve several purposes, such as feeding active power demand of the load/grid and countercurrent-related power quality issues at the common connecting point. The power quality issues taken into consideration are harmonics distortion, reactive power burden on the system, and unbalancing of connected loads. The FONF-based control proposes a modified structure of an integer-order notch filter. The integer-order filters have a limitation due to the fixed integrator and differentiator terms. In FONF, the power of integrator used in a notch filter can be modified according to the application required for obtaining the accurate response of the system. A prototype of the grid-connected solar PV system is developed in the laboratory using IGBTs based VSC and dSPACE MicroLabBox (DS-1202) to demonstrate the behavior of the FONF-based control. Simulation and experimental results are obtained for steady-state and unbalanced loads with variation in the solar irradiance. The harmonic distortions in the system are observed as per the IEEE-519 standard.
Published in: IEEE Transactions on Industrial Electronics ( Volume: 69, Issue: 1, January 2022)