A dc–dc converter used for fuel cell vehicles should be characterized by a wide voltage-gain range and low input current ripple. In order to meet the above requirements, a new nonisolated dc–dc converter consisting of an active switched-inductor cell, a zero current ripple cell, and a switched-capacitor (SC) cell was proposed in this article. The proposed converter integrates with the advantages of a wide voltage-gain range, zero input current ripple, low voltage stresses across power semiconductors, and common ground structure. Thanks to the use of a zero current ripple cell, not only the input current ripple is reduced but also the energy transfer path of the SC cell is changed, thereby reducing the instantaneous peak current of the SC structure. The operating principles, the characteristics analysis, and the parameter design of the proposed converter are given. In addition, to show the merits of the proposed converter, a comparison study is demonstrated. Finally, a prototype of 400 V, 1000 W/50 kHz is developed to validate the effectiveness of the proposed converter.