Loading [a11y]/accessibility-menu.js
Observer-Based Single-Sensor Control Schemes for LCL-Filtered Grid-Following Inverters | IEEE Journals & Magazine | IEEE Xplore

Observer-Based Single-Sensor Control Schemes for LCL-Filtered Grid-Following Inverters


Abstract:

In the single-sensor grid-following control of LCL-type grid-connected inverters, extended observers, which behave as “virtual sensors,” are typically employed for active...Show More

Abstract:

In the single-sensor grid-following control of LCL-type grid-connected inverters, extended observers, which behave as “virtual sensors,” are typically employed for active damping, disturbance rejection, current tracking, and grid synchronization. However, most of the existing observer-based single-sensor control schemes choose grid current as the system measurement and output, and the performance of other combinations is still unclear. Hence, in this article, with the help of impedance modeling and Nyquist stability criterion, a systematic comparative assessment for selecting different measurements and controlled outputs is introduced. In this comparison, the sub- and supersynchronous oscillation issues induced by grid faults, lower current reference, high phase-locked loop bandwidth, and large grid inductance, are investigated. In addition, two easily overlooked interval stability corollaries are proved, facilitating the system stability analysis. Finally, the correctness of the theoretical analysis is verified by a series of steady-state and transient experimental tests.
Published in: IEEE Transactions on Industrial Electronics ( Volume: 70, Issue: 5, May 2023)
Page(s): 4887 - 4900
Date of Publication: 13 July 2022

ISSN Information:

Funding Agency:


References

References is not available for this document.