Detector Based Radio Tomographic Imaging | IEEE Journals & Magazine | IEEE Xplore

Detector Based Radio Tomographic Imaging


Abstract:

Received signal strength based radio tomographic imaging is a popular device-free indoor localization method which reconstructs the spatial loss field of the environment ...Show More

Abstract:

Received signal strength based radio tomographic imaging is a popular device-free indoor localization method which reconstructs the spatial loss field of the environment using measurements from a dense wireless network. Existing methods achieve high accuracy localization using a complex system with many sophisticated components. In this work, we propose an alternative and simpler imaging system based on link level occupancy detection. First, we introduce a single-bounce reflection based received signal strength model, which allows relating received signal strength variations to a large region around the link-lines. Then, based on the model, we present methods for all system components including a classifier, a detector, a back-projection based reconstruction algorithm, and a localization method. The introduced system has the following advantages over the other imaging based methods: i) a simple image reconstruction method that is straightforward to implement; ii) significantly lower computational complexity such that no floating point multiplication is required; iii) each link's measured data are compressed to a single bit, providing improved scalability; and iv) physically significant and repeatable parameters. The proposed method is validated using measurement data. Results show that the proposed method achieves the above advantages without loss of accuracy compared to the other available methods.
Published in: IEEE Transactions on Mobile Computing ( Volume: 17, Issue: 1, 01 January 2018)
Page(s): 58 - 71
Date of Publication: 28 April 2017

ISSN Information:

Funding Agency:


Contact IEEE to Subscribe

References

References is not available for this document.