Kinesthetic haptic devices are designed primarily to display quasistatic and low-bandwidth forces and moments. Existing methods for vibrotactile display sometimes introduce haptic and/or audio artifacts. In this article, we propose a method to display vibrotactile stimulus signals of moderate to high frequency (20–500 Hz) using kinesthetic haptic devices with a standard 1 kHz haptic update rate. Our method combines symmetric square-wave signals whose periods are even multiples of the haptic update period with asymmetric square-wave signals whose periods are odd multiples of the haptic update period, while ensuring that the positive and negative impulses are balanced in both cases, and utilizing the just noticeable difference in frequency discrimination to avoid the need to display other frequencies. For frequencies at which the above method is insufficient, corresponding to a small band near 400 Hz for a 1 kHz update rate, we utilize a signal-mixing method. Our complete method is then extended to render haptic gratings by measuring scanning velocity, converting the local spatial frequency to its equivalent instantaneous temporal frequency, and displaying a single full-period vibration event. In a series of human-subject studies, we showed that our proposed method is preferred over existing methods for vibrotactile display of signals with relatively high-frequency content.